Knight Group Ergoplan Cupboard 900H Instruction Manual

Group Ergoplan Cupboard 900H
Assembly Instructions
Tools Required: Powered Screwdriver
Instruction Manual

Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete understanding of the product. It provides you with important information about the safety, use, installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.

SAFETY

• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual and pass it on to any future owner.

SET UP AND INSTALLATION

• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.

It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product and we apologise in advance.

Parts

Parts

Step 1
Preparation for top panel A, bottom panel G, left side panel X, right side panel Z, door panel V1 and V2.

1. Insert cams bolts (c1) and dowel pins (d1) into panels A, G, X and Z.
2. Fix the lock catch (k1) to panel A with screws (s1).
3. Fix hinge bodies (g2) to panels V1 and V2 with screws (s1).
4. Assemble handles (h3) to panels V1 and V2 with fix bolts (s7).
5. Fix the lock catch (k5) to panel V1 with screws (s1).
6. Fix the lock (k4) to panel V2 with screws (s1).
7. Assemble feet (c6) to panel G with screws (s2).

Step 2
Top panel A, bottom panel G, back panel D, side panel X and Z assembly.

1. Insert cam bolts (c1) on panel Z and X into cams on panel D and tighten in a clockwise direction.
2. Insert cam bolts (c1) on panel A and G into cams on panel X, D & Z and tighten in a clockwise direction.
3. Cover top of cams with cam stickers (c2).

Step 3
Movable shelf E assembly.

1. lnsert shelf pins (p1) into panels X and Z at desired shelf height.
2. Place movable shelf E on top of the shelf pins (p1).

Step 4
Door panel V1 and door panel V2 assembly.

1. Fix hinge bodies (g2) on door V1 to the inner of panel X with screws (s1).
2. Fix hinge bodies (g2) on door V2 to the inner of panel Z with screws (s1).
3. Follow diagram below to adjust the vertical, depth and sideways movement of the doors.

1. Loosen B screws

2. Adjust door vertical

3. Tighten B screws again

4. Loosen screw A

5. Adjust door in depth

6. Tighten screw A again

7. Loosen screw A

8. Adjust door sideways with screw C

9. Tighten screw A again

Complete

knightgroup.co.nz

References

• Knight Group

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>