Uer YD-03 Wireless Charger Night Light User Manual

Uer YD-03 Wireless Charger Night Light

Safety Instructions

Warning:

• Avoid dropping
• Do not disassemble
• Do not submerge in water
• This product should not exposed to dripping or splashing water
• Avoid extreme temperature
• Use original or certified adapter and cables
• Don’ t use any corrosive cleaner or oil to clean

Attention of use

• When adjust the lamp color, use your finger tap it gently, Don’ t beat it too hard. It will damage the sensitive devices inside
• When use the wireless charging, the maximum ambient temperature must not exceed the 40°C / 104°F. High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
• When charging, closing the phone background program can significantly reduce the heating problem. So that smartphones could be charged faster and safer.
• Do not place any foreign objects between your device and the wireless charger’ s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC or other objects, as they could potentially demagnetize charger, affect charging speed, cause overheating.
• Wireless charger station can charges directly through phone protective cases~2.5mm(0.l inch), but remove the magnetic or metal accessories from the phone case when charging
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers

What’s Included

Specification

-3500K -3000k
D i mm e r Way| Touch Control| USB O u tput| 5V/1A
Lumen| 600Im| Color| Buy wood + White
Size ( mm )| L3oo· w ao· H1so| Input Voltage| Type-C 12V2.5A
watch w i reless charging| 3W| Airpods wireless charg i ng| 3W
Package Contents| Bedside Lamp/User Manual/ Power Adapter ( 12V/2.5A)

Touch Control Dimming

Five color modes are available, you can adjust the bedside lamp by touch any position of the whole lamp arm. When adjust the lamp color, use your finger tap it gently, Don’t beat it too hard. It will damage the sensitive devices inside.

Click: Turn on and change bright white light to cold light ➔ natural light ➔ warm white light➔ warm yellow light ➔ turn off and cycle accordingly.
Long Press: Adjust the brightness of the lamp step Lesly.

3 IN 1 Wireless Charging

When power is connected, the QI wireless charging function will be turned on. just place your multiple devices on the charger station.

ATTENTION:

1. please make sure your smart phone device supports the QI wireless charging function described above.
2. only for 3W Airpods and watch.
   

USB Charging Port

When power is connected, you can use the port to charge your device Type-C

Clock Display

TX2230 bedside lamp with clock, help you know the time more conveniently.

1. Clock Brightness Adjustment:
   In the normal clock mode, press “right” button to adjust the clock brightness (100%-70%-30%-0FF)

2. Reset settings and 12/24 hour switch:

   • Long press “right” button for 5 sec ➔ display 88:88➔wait for 3 sec ➔ complete the reset setting
   • Single press “left” button ➔ switch 24 hour/12 hour
     24 hour mode ➔ display 0:00
     12 hour mode ➔ display 12:00

3. Clock Setting:
   In the normal clock mode
   Long press “left” button for 5 sec enter the clock setting mode (Clock flashing)
   Press “left” button ➔ Minute setting (minute flashing), press the right button to adjust the minute;
   Press “left” button ➔ Hour setting (hour flashing), press the right button to adjust the hour;
   Press “left” button ➔ Save clock settings

Cautions

1. Please use the matching power adapter, otherwise it will affect the efficiency of wireless charging.
2. If the phone is equipped with a protective case made of metal on the back, it cannot be charged wirelessly and must be disassembled for use.
3. Charging problems: Please adjust the device to the appropriate position of the charging board.
4. Please place it in a cool and dry indoor place with no direct sunlight at a temperature between 0-45°C.

FAQ

1. Why the lamp can’t be adjusted?
   A: Please place it on a stable table and use your finger touch the lamp arm. color will change. Don’t beat it too hard.

2. Why wireless charger makes an unusual noise?
   A: Every electronic gadget makes noise while the Alternative current passes through the main circuit. Method one, pull and plug the power cable Method two, Change the power supply and/or cable, To clarify, you could test using another power supply or cable to power up the charger.
   Method three, you’d better reduce excessive device charging when you need sleep. But if your wireless charger is making a distinctive or unusual noise, please contact us. We will help you solve the problem.

3. Why is wireless charging slower than charging via a cable?
   A: Wireless charging is around 70% efficient, meaning 30% of the power is lost during the wireless transmission process. The majority of the lost power is converted to heat which is why your phone can feel warm or even hot when wireless charging.

4. Why is wireless charging performance slow when i use
   A: When the battery is almost full (over 80-90%) the phone slows the charge rate to protect the battery as it reaches 100% capacity.
   When you’re running lots of apps, especially apps using GPS, with your screen on, your phone is consuming a lot more battery power so the wireless charger is working hard to keep the battery topped up, let alone increase the charge level. Phone manufacturers know this so they monitor and control the temperature of the battery. If the battery gets really hot your phone can reduce processor speed or even shut itself down. Wireless charging generates heat, and if the battery heats up above a threshold temperate (usually around 86-104°F) the phone will slow the wireless charging rate in an attempt to protect the phone’s battery from overheating. If your phone is being charged outside on a hot day (above 77°F) the battery will overheat much quicker so it will appear to charge much slower. Also, most phones have their battery positioned directly above the wireless charging coil, which is where the heat is concentrated during charging!

5. When charging, the device is hot.
   When you’re running lots of apps, especially apps using GPS, with your screen on, your phone is consuming a lot more battery power so the wireless charger is working hard to keep the battery topped up. If your phone is being charged outside on a hot day (above 77°F) the battery will overheat much quicker.

FCC Information

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference. and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Customer Service

12-Month Limited Warranty
Lifetime technical support
Our warranty is additional to the legal right consumers have buying this product
contact seller
uergogo@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>