SoundCore Rave+ Party Speakers A3391Z12 User Manual

SoundCore Rave+ Party Speakers A3391Z12

USER MANUAL

1. Charging

1.1 Charging Your Speaker

Use the included AC power cord to charge your speaker.

• Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
• Disconnect your speaker from the power supply when fully charged. Do not charge for extended periods.

1.2 Checking Battery Level

1.3 Charging Your USB Devices

Charge your mobile device through the Power IQ port on the back of this speaker.

2. Powering On/Off

• Unplug the power cable from the AC mains outlet when not in use for an extended period of time.
• This speaker will power off automatically after 30 minutes if there is no audio input.

3. Using Your Speaker

3.1 Bluetooth Pairing

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

• Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

3.2 PartyCast Mode

You can wirelessly connect up to 100 Soundcore Rave+ speakers or Soundcore speakers with PartyCast functions together.
1. Press and hold the Bluetooth button for 2 seconds on the Soundcore Rave+ that’s currently connected to your device as the primary speaker.
2. Repeat Step 1 on the other Soundcore Rave+ speakers you want to connect and then press the Bluetooth button twice to make them secondary speakers in PartyCast pairing.
→ The secondary speakers will automatically connect with the primary speaker.

When PartyCast mode is successfully entered:

• You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only.
• You can power off or switch light modes for each secondary speaker individually.
• You can’t adjust the volume for each secondary speaker individually.
• Any secondary speaker can be switched to become the primary speaker by pressing the Bluetooth button twice and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the Bluetooth button twice and searching for an available primary speaker.
• To exit the PartyCast mode, press and hold the Bluetooth button on any speaker for 2 seconds.

3.3 AUX/USB Mode

Plug in an audio cable or insert a USB flash drive, then press the source button to switch between AUX in mode and USB mode (support FAT32 / MP3 / WMA formats).

• Audio cable or USB flash drive is not provided.
• When using AUX mode, control audio playback via the connected device.

3.4 Wired Party Mode

You can connect multiple Soundcore Rave+ speakers via RCA cables to form a wired party chain.
Then press the source button to enter the wired party mode.

3.5 Button Controls

3.6 Light Effects
Your speaker is equipped with light effects for a party mood.
When powered on, the light effects are automatically turned on. Press the light effect button to switch among multiple music-sync light effects.
To turn off the light effects, press and hold the light effect button for 2 seconds.

You can also check all available specific light effects in the Soundcore app.

3.7 Microphone Connection

For the best performance, use the microphone (not provided) when in the wired party chain mode.
Connect the microphone to the MIC port. You can adjust the microphone volume by rotating the MIC ECHO volume knob.

4. Soundcore App

Download the Soundcore app to enhance your experience.

• Set up Bluetooth connection
• Check product information
• Update firmware
• Indicate battery status
• Customize button controls
• Switch among multiple light effects
• Light DJ mode to support light and sound variation
• Enjoy party games
• Switch BassUp mode
• Switch EQ modes
• Set Auto-power off time

5. Specifications

Specifications are subject to change without notice

DOWNLOAD

SoundCore Rave Plus Party Speakers A3391Z12 User Manual – [ Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>