Plum Bworld Roll Top Bath Waste Pack Installation Guide
- September 13, 2024
- Plum Bworld
Table of Contents
BATH LEGS FITTING INSTRUCTIONS
Roll Top Bath Waste Pack
- Connect trap to bath waste ensuring fibre washer is in place.
- Cut outlet tube to required length (for wall or floor outlet).
- Slide free nut onto ouflet tube, flanged side first.
- Place fibre washer and rubber seal onto outlet pipe.
- Tighten free nut onto trap.
- Fit flange over short end of outlet tube.
- Attach multi-fit connector to short end of outlet tube.
- Check for leaks.
- Push flange against floor or wall.
IMPORTANT NOTE.
Always release the captive nut before attempting to align the outlet tube.
Failure to do so will result in damage to the sealing components.
SHALLOW SEAL TRAP INSTRUCTIONS
Documents / Resources
| Plum
Bworld Roll Top Bath Waste
Pack
[pdf] Installation Guide
Roll Top Bath Waste Pack, Bath Waste Pack, Waste Pack, Pack
---|---
Read User Manual Online (PDF format)
Loading......