anslut 019451 Work Lamp LED Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019451 Work Lamp LED Instruction Manual
SYMBOLS
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz Output
30 W
Luminous flux 2550 lm
Colour temperature 4000 K Colour tone Cold
white
Protection rating IP65
Cord length 1.5 m
Size 30.5 x L22.5 x
DESCRIPTION
Work lamp with stand that has easy-to-grip handle. Adjustable lamp housing made of aluminium and toughened floodlight glass with LED light source. The lamp is dustproof, protected from running water and approved for indoor and outdoor use.
ASSEMBLY
Assemble the product as shown in the figures. FIG. 1-3
MAINTENANCE
RECYCLING
Recycle end-of-life product in accordance with local regulations. The light source should be removed from the lamp and recycled separately. See description of method below.
-
Undo the nuts and screws between the stand and floodlight by hand.
-
Cut the top corner of the floodlight housing with a hacksaw.. FIG. 4
-
Insert a flat-tip screwdriver in the gap between the glass and the casing, and carefully pry both parts apart. Stick another screwdriver between the glass and the casing and carefully bend apart.
Continue along the edge round the lamp until the glass comes loose. FIG. 5
-
Lift off the glass to access the LED light source. FIG. 6
-
Remove the light
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>