ZALMAN M3 Plus mATX Mini Tower Computer Case User Manual

June 4, 2024
ZALMAN

ZALMAN M3 Plus mATX Mini Tower Computer Case

ZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case

Precautions

Read this manual carefully before installing.

  • Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
  • Wear gloves to prevent accidents when installing the product.
  • Severe damage may occur when mounting the system, so do not apply excessive force.
  • Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
  • Be careful not to block the ventilation hole of the product when using the system.
  • Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
  • Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
  • Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
  • Store and use the product out of children’s reach.
  • Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
  • The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement

Specifications

Model M3 PLUS
Case Form Factor mATX Mini Tower
Dimensions 407(D) x 210(W) x 457(H)mm
Weight 6.0kg
Case Materials Plastic, Steel, Tempered Glass
Motherboard Support mATX / Mini-ITX
Maximum VGA Length 330mm
Maximum CPU Cooler Height 165mm
Maximum PSU Length 180mm
PCI Expansion Slots 4
Drive Bays 2 x 3.5” / 4 x 2.5″

Fan Support

| Top| 2 x 120mm
Front| 3 x 120mm
Rear| 1 x 120mm
Bottom| 2 x 120mm
Pre-Installed Fan(s)| Front| 3 x 120mm (with White LED Effect)
Rear| 1 x 120mm (with White LED Effect)
Radiator Support| Top| 240mm
Side| 240mm
I/O Ports| 1 x Headphone Jack, 1 x Mic, 1 x USB3.0, 2 x USB2.0,

Power Button, Reset Button, Fan-LED Controller

ZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case-14

Accessories

ZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-15

I/O Ports

ZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-16

INSTALLATION

Removing the side panels

  1. Tempered Glass
  2. Steel PanelZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case-2

Removing the front panel

Mounting the motherboardZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-4

Motherboard size

  1. mATX
  2. Mini-ITXZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case-5

Mounting the PSUZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-6

Mounting the PCI-E(VGA) cardZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-7

Mounting the 3.5″ HDDZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-8

Mounting the 2.5″ SSD / HDDZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-9

Mounting the radiator

  1. Top radiator
  2. Front radiatorZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case-10

Fans Included / Specifications

Mounting the fans

  1. Mounting the top fans
  2. Mounting the bottom fansZALMAN-M3-Plus-mATX-Mini-Tower-Computer-Case-12

I/O Connectors

ZALMAN-M3-Plus-mATX-Mini-Tower-Computer-
Case-13

www.zalmansvc.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals