Lekolar Akuframe Light Ceiling Products Instruction Manual
- June 12, 2024
- Lekolar
Table of Contents
Lekolar Akuframe Light Ceiling Products
Product Information: Akuframe Light Ceiling Products
Akuframe Light Ceiling Products are a type of lighting fixture that can be mounted on the ceiling. These products come with flat brackets and a T-screw to hold the module in place. The frame is centered along the module, and the T-screw holds the frame to the ceiling. The product is easy to install and use.
Product Usage Instructions:
- Mount the two flat brackets in the ceiling with a distance of approx. 1 m between them on the line where you want to install the module.
- Hang the module in the brackets and push the module against the ceiling on the opposite side of the fittings you mounted in step 1.
- Make a centered mark along the frame that protrudes from the ceiling.
- Make sure the head of the T-screw lines up with the slot in the frame.
- Remove the module from the flat brackets and insert the T-screw into the slot on the frame.
- Mount the module in the flat brackets again and push the module towards the ceiling so that the frame on the other side meets the T-screw.
- Use the flat wrench to turn the T-screw in the slot so it holds the frame to the ceiling.
Following these instructions will ensure that your Akuframe Light Ceiling Product is securely mounted on your ceiling and ready for use.
Mounting manual for Akuframe Light ceiling products
- Mount the two flat brackets in the ceiling with a distance of approx. 1 m between them (see picture below) – on the line where you want to install the module.
- Hang the module in the brackets and push the module against the ceiling. On the opposite side of the fittings you mounted in step 1. Make a centered mark along the frame.
- Take down the frame again
- Measure approx. 6mm inwards from the mark you made in step 2 and make another new mark.
- At this new mark (the mark you made in step 4) – screw in the T-screw so that only 6-8mm of the T-screw protrudes from the ceiling and make sure the head of the T-screw lines up with the slot in the frame.
- Mount the module in the flat brackets again and push the module towards the ceiling – so that the frame on the other side meets the T-screw.
- Use the flat wrench to turn the T-screw in the slot so it holds the frame to the ceiling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>