Wings Flobuds 300 True Wireless Earbuds User Manual

: June 15, 2024
: WINGS

Table of Contents

Wings Flobuds 300 True Wireless Earbuds User Manual
INTRODUCTION
WHAT’S IN THE BOX
PRODUCT LAYOUT
HOW TO PAIR
TOUCH CONTROLS
CALL CONTROLS
CHARGING THE CASE
CHARGING THE EARBUDS
RESETTING THE DEVICE
TECHNICAL SPECIFICATIONS
SAFETY AND MAINTENANCE
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wings Flobuds 300 True Wireless Earbuds User Manual

INTRODUCTION

Wings is India’s fastest growing audio, smart watches and accessories brand catering to the youth. Wings was recognized as the most Prestigious Rising Brand Of Asia 2021-2022 by BARC Asia in the gaming lifestyle accessories category.

Wings is on a mission to create a pop culture led brand that the youth is proud to own and Nodwil, a subsiclary of Neeare Technologies, has a strategic investment in alignment with the long term vision.
But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. After you’re done with reading the manual, get ready to go to the next level with Wings!

WHAT’S IN THE BOX

PRODUCT LAYOUT

Charging LED of Charging Case
Type C Charging Port
Microphone
Touch Countrol
LED Indicator of Earbuds

HOW TO PAIR

Step 1: Make sure your charging case Is powered up. Open the id of the case and take out the earbuds.The earbuds will turn ON and automatically enter pairing mode, and the left earbud LED will flash quickly.

Step 2: Tap “Fiobuds 300” from the smartphone’s Bluetooth menu. There is a ring prompt after a successful connection.This indicates earbuds are successfully connected to your device.

Step 3: Congratulations! You are now connected and can start playing media.

Note: If you do not connect to any device within 180 seconds of entering pairing mode,then both earbuds will automatically turn OFF. Please put the earbuds back into the case and repeat the pairing process.

TOUCH CONTROLS

CALL CONTROLS

CHARGING THE CASE

Note: Please only use a 5V/1A adapter to charge the case as higher voltage adapters can damage the battery of the case and earbuds.

Charging the Case: While charging the case,the case’s ice blue lights will blink

Fully Charged: When fully charged, the charging case’s ice blue LED lights will glow static until the charger is removed

CHARGING THE EARBUDS

Earbuds Low Battery: Earbuds will play a jingle, when the buds are low on power.

Earbuds Charging: When earbuds are placed inside the charging case,the LED light on the earbuds will turn ON indicating the earbuds are being charged.

Earbucis Completely Charge: When the earbuds are completely charged, the LED light on the earbuds will go OFF.

RESETTING THE DEVICE

Please follow the below steps when you see two ” Fiobuds 300″ in your Bluetooth device menu on your mobile, or you can hear music through only one earbud. This means the left and right earbuds have not auto-paired with each other.

Step 1: Disconnect the earbuds and remove ” Fiobuds 300″ from your mobile list of paired devices.

Step 2: Tap 5 times quickly to clear the pairing data on either of the earbuds.

The LED light on both earbuds will blink 3 times simultaneously to show that the process is completed.

Step 3: Put them back into the charging case, and ” Fiobuds 300″ Is ready to use.They will automatically switch on and pair instantly as well.

TECHNICAL SPECIFICATIONS

PARAMETERS	VALUES
Bluetooth Version:	V5.3
Effective Distance:	15M
Impedance:	320hm
Product Weight:	38g
Speaker Size:	13mm
Total Play lime:	Upto 50 Hours
Earbuds Play Time:	Upto 10 Hours
Talk lime:	Upto 45 Hours
Standby Time:	Upto 300 Hours
Complete Charging Time:	1.5 Hours
Earbuds Charging Time:	1 Hour
Rated Input:	5V/1A
Frequency	20Hz-20KHz
Water and Sweat Resistant:	IPX5
Charging Port :	Type-C

SAFETY AND MAINTENANCE

Please read the below suggestions to help prolong the product iffespan and clearly understand the wan’anty clauses:

Please keep the product dry, do not put it in humid conditions to avoid a short circuit.
Do not expose it to the peak sun or high heat for extended periods, as this will shorten the lifespan of electronic components, damage the battery and deform some plastic parts.
Please do not put it in cold circumstances to avoid damage to the PCB board.
Please do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
Do not use chemical products, detergents, or oily liquids to clean the item.
Do not scratch the surface with sharp items to avoid damaging the case and appearance.
Do not charge the product for more then 5 hours to avoid loss in battery life.
Avoid hearing music at maximum volume for long periods as this can affect your hearing and is not

Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take utmost care of your product.