SINJI SICV-0108 Cordless Vacuum Cleaner User Manual
- June 16, 2024
- SINJI
Table of Contents
SICV-0108 Cordless Vacuum Cleaner
User Manual
SICV-0108 Cordless Vacuum Cleaner
CORDLESS VACUUM CLEANER
SICV-0108 Manual
Description
The Sinai Cordless Vacuum Cleaner is convenient to use as it allows for
greater mobility, as you are not tethered to an outlet by a cord. The Cordless
Vacuum Cleaner is also easier to maneuver ,because it is lightweight and there
is no risk of tripping over a cord or accidentally pulling an appliance off a
countertop or shelf!
Contents
1× Cordless Vacuum Cleaner
1× Wall mount
1× Adapter
1× Long crevice nozzle
1× Small 2-in-1 crevice
1× Big 2-in-1 crevice
1× expansion screw set
1× Filter (installed)
Overview of the appliance
- Main handle
- Power switch (normal power (I) and max power (II))
- Battery case
- Battery case release button
- Dust container (cup)
- Dust container bottom lid
- Dust release button
- Charging port
- Battery status indicator
- Extended tube release button
- Suction inlet
- Extended tube
- Main roller brush / main main roller brush
- Main roller brush release button
Overview
- Important safety instructions
- Charging
- Installing the wall mount
- Operation instructions
- Troubleshooting
Important safety instructions
To avoid potentially fatal electric shocks:
- Do not use the appliance outside or near water.
- Do not use the vacuum cleaner if the cord, plug, or housing is damaged.
- If the cord or plug is damaged, have it replaced by a qualified technician or contact customer service.
- Only have repairs done by a qualified technician. Do not try to open or repair the appliance yourself.
- Make sure the voltage of the power source matches the voltage listed in the technical data for the appliance before turning it on.
- Do not touch the power source or the appliance with wet or damp hands.
- Do not use an extension cord with the adapter, plug the adapter directly into a power socket.
To avoid the risk of injury:
- Do not change accessories while the appliance is turned on.
- Do not use the vacuum cleaner to vacuum up sharp objects or glass shards.
- Do not use the vacuum cleaner to vacuum up burning matches, ashes, or cigarette butts.
- Do not use the vacuum cleaner to vacuum up chemical products, stone dust, gypsum, cement, or similar particles.
- Do not use the vacuum cleaner to vacuum up liquids or water.
- Do not use the vacuum cleaner with flammable or explosive substances or with chemical or aggressive liquids.
- Store the appliance indoors in a dry location when not in use.
- Under extreme conditions, leaks in the battery cells may occur. If battery fluid comes into contact with skin or eyes, rinse the affected area with water immediately and seek medical attention.
- Children aged 8 and above, and people with reduced physical, sensory, or mental capabilities, can use the appliance if they are supervised and understand how to use it safely. Children should not play with the appliance and should
not clean or perform maintenance on it without supervision.
Safety tips:
- Only use accessories recommended by the manufacturer.
- Do not use the adapter for any other purpose.
- Do not carry the wall holder or adapter by the cord.
- Do not pull on the cord to move the appliance.
- Unplug the appliance by grasping the power plug, not the cord.
- Make sure the ventilation slits are open. A blocked ventilation system can cause overheating and damage to the appliance.
- Do not use the vacuum without the dust filter inserted.
- Do not use the adapter for a different product or try to charge this appliance with a different charging station. Only use the charging station supplied with this appliance.
- Do not try to recharge non-rechargeable batteries.
Charging
The Sinji Cordless Vacuum Cleaner can be charged in the wall mount or you can
remove the battery to charge it somewhere else.
Use the included adapter to charge the vacuum via the charging port (8)
Installing the wall mount
- Determine how high you want to install the wall mount so the Sinji Cordless Vacuum Cleaner so it can hang on the wall (with the extended tube attached)
- Mark the 3 drilling holes through the wall mount
- Use the three screws to mount the wall mount to the wall.
- Place and hang the Sinji Cordless Vacuum Cleaner onto the mount.
Operation instructions
3.1 Assembling:
- Be sure to disconnect the Sinji Cordless Vacuum Cleaner from the charger before assembling the extended tube!
- Take out the Sinji Cordless Vacuum Cleaner, extended tube, and main roller brush from their packaging.
- Insert the extended tube into the suction inlet of the Cordless Vacuum Cleaner. You should hear a “click” when the extended tube is assembled correctly. Make sure the extended tube is inserted correctly before using the vacuum cleaner.
- Attach the main roller brush to the extended tube. Insert the extended tube into the main roller brush and push the Sinji Cordless Vacuum Cleaner firmly towards the floor brush.
3.2 Charging:
Note: The Sinji Cordless Vacuum Cleaner will not work while it is
charging.
- Place the unit or Sinji Cordless Vacuum Cleaner near an electrical outlet and plug in the charger.
- Connect the charger to the charging socket. The battery status indicator lamp will light up to show that the vacuum cleaner is properly connected to the charger and is being charged. When the vacuum is fully charged, all 3 lamps will turn off after 10 hours.
3.3 How to remove the extended tube
Make sure the unit is not connected to the charger. Then, push the extended
tube release button (10) to remove the extended tube from the Cordless Vacuum
Cleaner. Grasp the handle of the Cordless Vacuum Cleaner and pull it out of
the extended tube. You can now use the Cordless Vacuum Cleaner on its own.
3.4 How to use
- Make sure the vacuum cleaner is not connected to the charger. If the vacuum cleaner is charging or has a low battery, it will not work.
- The Sinji Cordless Vacuum Cleaner can be used on its own or with the combined crevice nozzle.
- Press the power switch to turn the vacuum on and off, or to alternate between the normal power (I), max power (II) and off.
- Make sure the Sinji Cordless Vacuum Cleaner is properly connected to the extended hose and floor brush.
- Turn the power on by pressing the switch on the main handle or the Sinji Cordless Vacuum Cleaner . Some models may have multiple power settings, which can be selected by pressing the switch again.
- If your model has a power brush and an extension tube, you can use either one, depending on your preference.
- Before using the vacuum cleaner, make sure it is not charging or has a low battery, as this may prevent the vacuum and main roller brush from functioning properly.
3.5 Empty and clean the dust container & dust filter
Note: To get the best performance, it is recommended to empty the dust
container and clean the dust filter after a few cleaning sessions, depending on
your situation.
- Detach the extended tube from the Sinji Cordless Vacuum Cleaner by pressing the release button.
- Press the dust release button (7) to empty the dust container.
- Rotate the dust container’s transparent cover so it faces the the “unlock” marking, and remove the dust container and filter assembly.
- Take out the upper HEPA filter and the plastic cyclone filter, wash them, and air dry them completely. Do not use a washing machine or hair dryer to clean or dry the filters.
- Only place the dust filter back into the assembly when it is completely dry! Insert it into the dust container and push it firmly into place. Make sure the dust filter assembly is properly installed before using the vacuum cleaner.
- Attach the dust container assembly to the Cordless Vacuum Cleaner and rotate it so it is locked.
It is recommended to clean or replace the filters and clean the cyclone system every three to six months, depending on usage, to ensure the best performance of the vacuum cleaner. The main roller brush should also be checked regularly, and any hair or other debris should be removed.
Troubleshooting
| PROBLEM | POSSIBLE REASON | POSSIBLE SOLUTION |
|---|
Sinji Cordless Vacuum
Cleaner does not work| 1. The battery has not been charged.
2. Dead battery(battery won’t hold charge).
3. Connector between the unit and the charger is dirty.
4. No power in electrical outlet supplying transformer.
5. Charger is plugged in.
6. System is protected.| 1. Charge unit.
2. Contact the customer service or dispose of unit.
3. Wipe and clean dirt from connector.
4. Check fuse or breaker, replace fuse/reset breaker.
5. Unplug charger.
6. Activate the system with the charger.
Main roller brush does not
work| 1. The main roller brush is blocked with debris or string etc.
2. The belt is broken.
3. Sinji Cordless Vacuum Cleaner is not connected correctly.| 1. Remove
debris from main roller brush. If there is string or thread wrapped cut
gently with scissors.
2. Contact the customer service
3. Connect the Sinji Cordless Vacuum Cleaner correctly.
Sinji Cordless Vacuum Cleaner cannot pick-up dust; suction power has become
weak| 1. Dust container is full.
2. Dust filter needs cleaning or replacement.
3. Unit needs recharging.| 1. Empty dust container
2. Remove dust filter assembly and check for object(s) in suction inlet and
remove.
Clean or replace dust filter assembly.
3. Charge unit.
Dust leak from handheld vacuum cleaner| 1. Dust container is full.
2. Dust filter is not installed correctly.
3. Puncture/hole in dust filter| 1. Empty dust container
2. Review the dust filter assembly installation instructions.
3. Replace dust filter assembly.
Battery cannot be charged| Battery has reached the end of its service if.|
Contact the customer service
Hear strange noise when
the vacuuming| Check whether the main roller brush or dust filter is blocked by
dust or big objects; check whether dust container is full.| Stop to use the
appliance to prevent damage. Clean the dust filter assembly and
main roller brush and empty the dust container. If the problem maintains,
contact the customer service.
**** In accordance with European directives applicable to this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe.
© 2023, Sinji. All rights reserved.
www.sinjiproducts.com
Made in China
Documents / Resources
|
SINJI SICV-0108 Cordless Vacuum
Cleaner
[pdf] User Manual
SICV-0108 Cordless Vacuum Cleaner, SICV-0108, Cordless Vacuum Cleaner, Vacuum
Cleaner, Cleaner
---|---