Roth Minishunt Heating Shunts Installation Guide
- June 10, 2024
- Roth
Table of Contents
Roth Minishunt Heating Shunts Installation Guide
[](https://manuals.plus/wp-content/uploads/2023/05/Roth-Minishunt-
Heating-Shunts-Installation-Guide_2.png)WARNING
Risk of fatal electric shock from touching live connections. Before working on
the controller always switch o the 230V power supply and prevent it from
being accidentally switched on.
Must be mounted on a Flat surface, screws max. Ø 3 mm.
A Connect to 230V power, Controller is ready for pairing of sensor. Please see thermostat/sensor operation manual.
B) 230V pump output, max. load 0,5 A. Connect “brown” to L and “blue” to N.
Cables must be secured.
C )Actuator. Connect “brown” to L and “blue” to N. Cables must be secured. Use
Roth Project actuators 230V 1 Watt, HVAC no. 7466275430.
Glass fuse WT 6.3 A (5 x 20 mm). Turn o 230V power before replacing.
) In the event of a power failure, the connection between the room thermostat
and the receiver is restored within 5-10 minutes
Connect to 230V power, Controller is ready for pairing of sensor. Please see
thermostat/sensor operation manual.
ROTH DANMARK A/S
Centervej 5
3600 Frederikssund
Tlf. +45 4738 0121
E-mail: service@roth-danmark.dk
roth-danmark.dk
ROTH UK Ltd 1a Berkeley Business Park
Wainwright Road
Worcester WR4 9FA
Phone +44 (0) 1905 453424
E-Mail enquiries@roth-uk.com
technical@roth-uk.com orders@roth-uk.com accounts@roth-uk.com roth-uk.com
Read More About This Manual & Download PDF:
References
- borger.dk - din indgang til det offentlige
- Frontpage | Norge.no
- Hej! Welcome to sweden.se – the official website of Sweden
- UK.COM