TESLA KT200WX Kettle User Manual
- June 4, 2024
- Tesla
Table of Contents
NB301BXA
User Manual
NUTRI BLENDER
IMPORTANT SAFETY INSTRUCTION
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR BLENDER WARNING!
- To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- DO NOT allow young children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.
- Never let the appliance operate unattended
- Remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull it from the electrical outlet. Never pull from the power cord.
- DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from the electrical outlet; instead, grasp the plug and pull to disconnect.
- DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner.
- If the power cord is damaged, it must be replaced by the manufacturer, a certified service agent or similarly qualified persons in order to avoid a hazard.
- DO NOT let the power cord hang over the edge of the table or counter or touch hot surfaces such as the stove.
- Always use the appliance on a dry, level surface. Sinks, drain boards, or uneven surfaces must be avoided.
- Keep hands, hair, clothing, as well as utensils out of the jar while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
- CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always hold by the base of the blade assembly.
- Avoid contact with moving parts.
- DO NOT attempt to sharpen blades.
- DO NOT use the appliance if the blade assembly is bent or damaged.
- To reduce the risk of injury, never place the blade assembly on the base without the proper attachment.
- DO NOT operate this appliance on or near any hot surface (such as a gas or electric burner or in a heated oven).
- The use of attachments or accessories not recommended or sold by the manufacturer may cause fire, electric shock, or personal injury.
- DO NOT remove the jar from the motor base while the appliance is running.
- To reduce the risk if injury, NEVER operate the appliance without the blade assembly in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
- DO NOT expose jars to extreme temperature changes.
- CAUTION: DO NOT PROCESS HOT FOODS OR HOT LIQUIDS.
- DO NOT overfill.
- DO NOT operate the appliance empty.
- If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using it again.
- THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
- Appliance accessories are not intended to be used in the microwave. Do not place the jar or the lid in the microwave as it may result in damage to the accessories.
- Check the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
- Never immerse the motor unit in water or any other liquid, do not rinse it under the tap. Use only a moist cloth to clean the motor unit.
- Unplug the appliance immediately after use.
- Keep the appliance out of the reach of children.
- Always unplug the appliance before you start cleaning the appliance.
- Do not use the attachment that another manufacturer produces or other parts.
- To avoid occurring danger, please assemble the product correctly.
- Make sure the blade is securely fastened to the accessories before you assemble them onto the motor unit.
- Do not attempt to repair or disassemble the appliance. There are no user-service-able parts.
- Extreme caution is necessary when moving any appliance containing hot liquids.
- Do not use the jars in the microwave.
- Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
The product and its packaging have been manufactured from valuable materials
that can be recycled. This reduces the amount of refuse and helps to preserve
the environment. Dispose of the packaging in the proper manner. Make use of
the local facilities provided for collecting paper, cardboard, and lightweight
packaging by type.
WARNING! Extension cords are not recommended for use with this product.
SAVE THESE INSTRUCTIONS
TECHNICAL SPECIFICATIONS
Voltage: 220V-240V
Power: 1000W
Jar Capacity:
0.5L
0.8L
NOTE
As a result of continual improvements, the design and specifications of the
product may differ slightly from the unit illustrated on the packaging.
GETTING TO KNOW YOUR APPLIANCE
A Seal Lid
B Sip & Seal Lid
C 0.8L Jar
D 0.5L Jar
E Motor Base
F Blade Assembly
NOTE
Attachments are interchangeable.
The blender is a high-powered innovative tool with a compact design and
outstanding performance. It is perfect for ice-crushing, chopping, blending,
and nutrient and vitamin extraction. Blend and go with the convenient Sip&Seal
lids, and create delicious drinks to get you out the door quickly! Best
results are achieved when you Pulse.
Features
- Nutrient & Vitamin Extraction
- 1000 Watt Motor
- Personalized, healthy drinks and juices on the go
- BPA free Jars
BEFORE FIRST USE
Before using your appliance for the first time, it is important that you read
and follow the instructions in this use and care booklet, even if you feel you
are familiar with this type of appliance. Your attention is drawn in
particular to the section dealing with the appliance. Find a safe and
convenient place to keep this booklet handy for future reference.
This appliance has been designed to operate from a standard domestic power
outlet. It is not intended for industrial or commercial use. Carefully unpack
the Appliance. Remove all packing materials and either discard or retain them
for future use. Ensure that the voltage of your electricity supply is the same
as that indicated on the rating label of the appliance. Remove the plastic
accessories and wash them in warm soapy water. Dry thoroughly and replace.
Wipe over the exterior of the Motor Base with a damp sponge or cloth. Do not
use abrasive cleaners. PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
USE
Assembly
IMPORTANT: Attachments are interchangeable.
CAUTION: Blades are sharp! Use extreme caution when handling the blade
assemblies. Always hold them by the base of the blade assembly.
IMPORTANT: Never run the appliance empty.
CAUTION: Never attempt to remove the jar while the appliance is still
running.
WARNING: Never leave the appliance unattended while in use.
- Remove all packaging material and labels from the appliance.
- Wash the lids, jars, and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies as the blades are very sharp.
- Rinse and dry thoroughly
- Jars, lids, and attachments are all dishwasher-safe. It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the jars before placing them in the dishwasher.
- Wipe the motor base clean with a damp cloth.
Removal
IMPORTANT: Make sure that the motor base is plugged in for use.
- Place the motor base on a clean, dry, level surface such as a counter or tabletop.
- Make sure the unit is unplugged.
- Add ingredients to the jar.
- Place the blade onto the jar and twist it on tightly until you have a good seal.(Fig. 1)
- Turn the jar upside down and place it onto the motor base, aligning the tabs on the jar with the motor base, aligning the tabs on the jar with the motor base. Turn it clockwise, the unit is ready for use.(Fig. 3)
- When you have reached your desired consistency, stop the appliance by turning the jar counterclockwise(Fig. 4) and pull it straight up to remove. (Fig. 5) NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
- Turn the jar upright and remove the Blade Assembly by twisting the blade assembly counterclockwise. Be sure to store the Blade Assembly attached to an empty jar when not in use.
- Place the Sip & Seal lid onto the jar, twist to seal, and enjoy!
- Make sure that the motor base is unplugged when not in use.
SAFETY FEATURES
Built-in safety lock
The blender has a built-in safety lock feature, this ensures that you can only
switch on the appliance while the cup and the blade subassembly are assembled
on the motor base securely. If the appliance is correctly assembled, the
built-in safety lock will be unlocked.
IMPORTANT: In the base of each blade’s collar, there is a silicone gasket
seal that creates an airtight fit with the jars. After dishwashing and before
each use, always check to make sure the gasket is properly in place, as the
heat from some dishwashers may cause the gasket to become loose.
WARNING: Do not operate the motor continuously for more than 180 seconds
at a time. Allow the motor to rest for 60 seconds before continuing.
NOTICE: If the blade is not running smoothly, stop the product and add
some liquid, or reduce the ingredients in the cup.
NOTE: To prevent product overheating, dry ingredients must not be
processed for more than 30 seconds at a time.
SUGGESTED USES
| PURPOSE | SUGGESTED JAR | TYPE OF FOOD |
|---|---|---|
| Chopping | 0.5L | |
| 0.8L | Nuts |
Chocolate
Grating| 0.5L| Cheese
Bread Crumbs
Mixing| 0.5L
0.8L| Batters
Dips
Sauces| 0.5L
0.8L| Vinaigrettes
Salad Dressings
Simple Sauces
Frozen Blending| 0.5L
0.8L| Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies| 0.5L
0.8L|
CARE & MAINTENANCE
How to clean
CAUTION : Make Sure that the motor base is unplugged from the power
source before inserting or removing any attachment and before cleaning.
NOTICE: Wait until the blender has cooled down sufficiently before
cleaning it.
CAUTION: DO NOT immerse the motor base in water or any liquid, or place
it into a dishwasher.
-
Separate/remove all parts from each other.
-
Clean the motor base with a slightly damp cloth and wipe dry
-
Place jars in the dishwasher. Place the lids and attachments on the top rack.
Use caution when handling the blade assemblies as the blades are very sharp. -
Whenever possible, rinse parts immediately after processing to make cleanup easier.
-
Store the product in a cool, dry place.
NOTE
You may also wash the jars by filling the jar to the Max fill line with warm
water and a drop of dishwashing detergent, placing the blade assembly on the
jar, and pulsing a few times. Do not fill the jar more than Max fill line with
water because it will overflow. Once clean, remove the jar from the motor
base. Rinse the jar, attachment, and lid under running water. Allow all the
parts to dry before storing. Do not use scouring pads, abrasive cleaning
agents, or aggressive liquids such as petrol, alcohol, or acetone to clean the
appliance All detachable accessories can be cleaned in the dishwasher.
Tips:
Use a small brush(not included) to remove particles of food lodged underneath
the blades. If some leftover particles dry onto the inside of the jar, fill
the cup about 2/3 full with warm water and attach the blade subassembly. Place
the jar and blade subassembly onto the motor base and operate the appliance
for about 20-30 seconds to help loosen the stuck ingredients. Repeat the above
step but use clean tap water. Empty blender and dry thoroughly.
CAUTION: Do not try attempt to remove blades from the Blade subassembly
for cleaning.
HOW TO STORE
- Store the appliance upright. Do not place anything on top. Store the jars and the rest of the attachments alongside the appliance where they will not be damaged and won’t cause a hazard.
- Remove and empty the jar and ensure that no food is jamming the cutting blades.
- Allow the appliance to cool for approximately 30 minutes.
- Re-install the jar onto the base and re-plug the appliance into the electric outlet.
- Proceed to use the appliance as before while making sure not to exceed the recommended maximum jar capacities.
TROUBLESHOOTING GUIDE
| PROBLEMS | POSSIBLE REASONS & SOLUTIONS |
|---|---|
| The motor doesn’t start or the attachment doesn’t rotate. | For the jars, make |
sure that the tabs are seated in the slots and turned clockwise
Food is unevenly chopped.| Either you are chopping too much food at once, or
you are not pulsing properly. Reduce the amount of food in the jar.
Food is too finely chopped or too watery| The food has been over-processed.
Use short operating for best results.
You can not achieve snow from ice cubes.| For best results use ice straight
from the freezer.
Try using a short operating instead of a long one. Make sure the jar is
completely dry before adding ice.
Jar is leaking| Make sure that your lid or blade assembly is properly
assembled to the jar. Leaking may occur if it is misaligned when twisted into
the jar. Turn the lid tightly clockwise.
The unit doesn’t turn on| Make sure the unit is plugged in.
Make sure the blade assembly is properly assembled to the jar and that is not
misaligned
Unit doesn’t turn off| Unplug the power cord from the electrical outlet and
call customer service for support
Doesn’t mix well| Pulse ingredients for best results. Press down on the jar in
short intervals for even blending and chopping. For frozen ingredients, pulse
in short intervals of 2-5 seconds and repeat.
Lid/blade assembly will not properly align with the jar| Set the jar on a
level surface. Place the lid or blade assembly on top of the jar and align the
threads so that the lid/blades sit flat on the jar. Twist clockwise so that
the lid/blades evenly align to the jar until you have a tight seal.
WARRANTY INFORMATION
The manufacturer provides a warranty in accordance with the legislation of the
customer’s own country of residence, with a minimum of 1 year, starting from
the date on which the appliance is sold to the end user. The warranty only
covers defects in material or workmanship. The repairs under warranty may only
be carried out by an authorized service center. When making a claim under the
warranty, the original bill of purchase (with purchase date) must be submitted
The warranty will not apply in cases of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
TECHNICAL SPECIFICATION
Voltage: AC 220V – 240V~
Frequency: 50Hz-60Hz
Power: 1000W
Correct Disposal of this product:
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased, they can take this product for
environmentally safe recycling