8BitDo N64 Bluetooth Controller Kit with Joystick Component Installation Guide
- June 10, 2024
- 8Bitdo
Table of Contents
8BitDo N64 Bluetooth Controller Kit with Joystick Component
Mod kit for N64 controller + Joystick
- Please handle it with care.We are not responsible for any damage caused in use.
PARTS
INSTALLATION INSTRUCTION
instruction manual
- Press Start button to turn on the controller.
- Hold Start button for 3 seconds to turn off the controller.
- Hold Start button for 8 seconds to force the controller to shut down.
Switch
- Please ensure your Switch system is the latest version.
Bluetooth
- Turn the mode switch to [S].
- Press Start to turn on the controller.
- Hold pair button for 3 seconds to enter its pairing mode, the LED starts to blink rapidly. (This is required for the very first time only)
- Go to your Switch Home page to click on [Controllers], then click on [Change grip/order] and wait for the connection.
- LED becomes solid when the connection is successful.
Wired Connection
- Go to System Setting > Controllers and Sensors › Turn on Pro Controller Wired Communication
- Turn the mode switch to [S].
- Connect the controller to your Switch dock via a USB cable.
- Wait till the controller is successfully recognized by your Switch to play
Android / Windows
Bluetooth
- Turn the mode switch to [D].
- Press Start to turn on the controler.
- Hold pair button for 3 seconds to enter its pairing mode, LED starts to blink rapidly. (This is required for the very first time only)
- Go to your Android/Windows device’s Bluetooth setting and pair with [8BitDo N64 Modkit].
- LED becomes solid when the connection is successful.
Wired Connection
- Turn the mode switch to [D].
- Connect the controller to your Android/Windows device via USB cable, then wait till the controller is successfully recognized by your Android/Windows device to play.
Turbo
- D-Pad, joysticks, Star button are not supported.
- Star button equals to screenshot when connected to Switch.
- Hold the button you would like to set turbo functionality to, then press the star button to activate/deactivate its turbo functionality.
Battery
About 8 hours of playtime with a 500mAh built-in battery pack, rechargeable with 1 to 2 hours of charging time.
LED indicator status
-
Charging LED stays solid
-
Fully charged LED light out
-
Low-battery LED blinks
-
It will automatically shut down if it is not connected within 1 minute or if
there is no operation within 15 minutes after startup. -
It will not automatically shut down when it is on a wired connection.
-
Support
- Please visit support.8bitdo.com for further information & additional support.
Read User Manual Online (PDF format)
Loading......