SPORT-THIEME 291 0202 Pedometer 2GO 3D Active Instruction Manual

: June 10, 2024
: SPORT-THIEME

Table of Contents

SPORT-THIEME 291 0202 Pedometer 2GO 3D Active
Product Information
Product Usage Instructions
Setting Your Step Length
Battery Change
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SPORT-THIEME 291 0202 Pedometer 2GO 3D Active

Product Information

The Sport-Thieme Pedometer 2GO (Art.-Nr. 290 9905) is a device that helps track steps taken and distance covered. It comes with an LCD display, SETTINGS, MODE, and ZERO buttons, a belt clip, and a battery cover. The device also has functionalities such as setting personal data and time, clock function, and pedometer function. The pedometer can detect five or more consecutive steps to start tracking steps and distance covered.

Product Usage Instructions

Setting Personal Data and Time

To set personal data and time on the Sport-Thieme Pedometer 2GO:

Press the SETTINGS button.
Enter the correct time.
Select CM or INCH as the metric or imperial unit.
Enter your body weight and stride length.
Press SET or leave the unit to rest for about 20 seconds to confirm the setting.

Hint : To set the stride length correctly, refer to the section “SO SET YOUR STEP LENGTH ON.”

Setting Your Step Length

To set your step length on the Sport-Thieme Pedometer 2GO:

Refer to the section “SO SET YOUR STEP LENGTH ON.”

FUNCTIONS:

LCD display
SETTINGS button
MODE button
ZERO button
Belt clip
Battery cover

1. SET PERSONAL DATA AND TIME

In STEP mode, press and hold the SET button until the display shows „12Hr“ and the digits start flashing.
Figure 1: Setup screen
Press SET to access the setting in the following order: Choose between 12-hour and 24-hour formats, set the time, choose bet-ween CM and INCH as metric or imperial units, set the stride length, and set your body weight.
Press RESET to select the 12-hour or 24-hour display: Enter the correct time, select CM or INCH as the metric or imperial unit, enter your body weight and stride length.
Figure 2: In setup mode, selection of metric or imperial units
Hint : To set the stride length correctly, please refer to the section „SO SET YOUR STEP LENGTH ON“. – Press SET or leave the unit to rest for about 20 seconds to confirm the setting.

SET YOUR STEP LENGTH:

a) Walk 10 normal steps as shown in the figure above.
b) Measure the distance from start to finish.
c) Calculate your stride length by dividing the total distance by 10.

Example :
Total Distance: 150“ → Step length: 150“ / 10 steps = 15“. Total distance: 380 cm → Step length: 380 cm / 10 steps = 38 cm
Hint :
Adjustment range Step length.

Metric: from 30 cm to ~150 cm; with intervals of 2 cm
Imperial from 12 inch to ~60 inch; with intervals of 1 inch
Preset stride length: 30 inch / 80 cm

Body weight adjustment range:
Metric : from 30 kg to 135 kg, with 1 kg intervals
Imperial : from 60 pounds to 300 pounds, with 1 pound intervals
Default body weight: 100 pounds / 45 kg

Clock Function

To use the clock function on the Sport-Thieme Pedometer 2GO:

In SETTINGS mode, select 12-hour or 24-hour format.
In 12-hour format, P indicates the time after 12 noon.
When the pedometer rests for 1 minute, it automatically switches to sleep mode (SLEEP), and the LCD display will show the time only.

Reading the Time in Sleep Mode
When the pedometer rests for 1 minute, it automatically switches to sleep mode (SLEEP). The LCD display will now show the time only. The device will be active again and go into step mode when the pedometer sensor has detected 10 consecutive steps.

Pedometer Function

To use the pedometer function on the Sport-Thieme Pedometer 2GO:

Make sure that 5 or more consecutive steps are detected.
Press the MODE button repeatedly until “KM” for metric format appears at the top of the display. In imperial format, the display will show miles.

Step counter up to 99,999 steps
Recording of „covered distance“ up to 999.99 km / 999.99 miles
Display calorie consumption up to 9999.9 kcal
Selection of metric or imperial units
Correction: Start only after 10 steps
CLOCK 12/24-hour format

A. STEPS“ FUNCTION

Press the MODE button until „STEP“ appears at the top of the display. The step counter starts counting when a movement is detected (there must be more than 10 consecutive steps).
Press and hold the RESET button until the digits go to zero to reset the counter.

WARNING : All pedometer data for the day will also be reset to zero.

B. Correction: Start only after 5 steps

To prevent accidental movements from being counted as steps, the counter only starts counting when 5 or more consecutive steps are detected.

C. DISTANCE COVERED

Press the MODE button repeatedly until „KM“ for metric format appears at the top of the display. In imperial format, the display shows „MILE“.
The distance counter starts counting when motion is detected.
To reset the distance counter, press and hold the RESET button until the digits go to zero.

D. CALORIES

Press the MODE button repeatedly until „KCAL“ is displayed.
The counter starts counting when motion is detected.
Press and hold the RESET button until the digits go to zero to reset the calorie counter.