Beghelli CT Formula 65 LED Instruction Manual

: June 10, 2024
: Beghelli

Table of Contents

Installation Instruction
Basic setting
Use with App B.connect
AUTOMATIC TESTS PERIODICITY:
WARNINGS – GUARANTEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Beghelli CT Formula 65 LED Instruction Manual

Installation Instruction

Instruction

Installation
Dimension

Basic setting

Setting

Connect the battery AFTER cutting the wire for autonomy selection The selection of the autonomy of the lamp made by the App has priority over the settings on the circuit.

Connection

Wiring with Infinity mode deactivated

Wiring connection

For the functioning please refer to the instruction manuals either of the Central CableCom Connect (cod. 20151).

For the Central configuration the batteries must be sufficiently charged.

Be careful NOT to invert the phase and neutral polarity. Maximum connectable lamps 32. Do not connect other types of devices on the power cable / BU

Wiring connection

Wiring 2.1 The appliance goes into emergency conditions for:

absence of a general emergency electricity (CableCom);
absence of a local lighting

Caution

SA luminaires can be set SE only through the App (with smartphone flash on the lamp or with wi-fi with Central CableCom Connect). With Infinity mode on N2 L2 must be connected like wiring 2.1 or 2.2.

Setting
Battery Connector

| 230V

50Hz

| COS j| | | ** Clock *
---|---|---|---|---|---
19290 SE**| 180mA| 0.07| 32 LED| Life 6,4V 1,5Ah|

1h 1,5h 2h 3h 8h

¥ **

19291 SE| 180mA| 0.07| 32 LED| Life 6,4V 1,5Ah
19292 SE| 180mA| 0.07| 32 LED| 2x Life 6,4V 1,5Ah
19293 SE| 180mA| 0.07| 32 LED| 2x Life 6,4V 1,5Ah
19294 SA| 180mA| 0.115| 32 LED| Life 6,4V 1,5Ah
19295 SA| 180mA| 0.115| 32 LED| 2x Life 6,4V 1,5Ah
19296 SA| 180mA| 0.115| 32 LED| 2x Life 6,4V 1,5Ah

Expansion with LG • LGFM • DALI module

Instruction

CONFIGURATION AND COMMANDS

|

AT (without APP and without Central)

| AT + APP| AT + CENTRALE CABLECOM CONNECT (cod. 20151) + APP
---|---|---|---
– CONFIGURATION| Autonomia- Duration 1h| • Default| • Default| • Default
Autonomia- Duration 1,5h| | •| •
Autonomia- Duration 2h| | •| •
Autonomia- Duration 3h| • con jumper| •| •
Autonomia- Duration 8h| | •| •
SA (solo su lampade SA)

(only on Maintained Luminaire)

Use with App B.connect

A- Open App B.connect (available for download on the App Store and Google Play).
B- The configuration of the lamp can be accessed through the “luminaire” menu.

LAMP RESPONSE:

1 high brightness flash= function performed 5 low light flashes= function NOT enabled No flashing= command NOT received

N.B. With CableCom Connect control unit cod 20151 all configurations and commands can be sent remotely via the “nuBe” cloud.

Connecting

POSITION LAMP FOR COVER ENSURE THE PROGRAM (eg. a lot of light – less distance)

Lamp position

AUTOMATIC TESTS PERIODICITY:

FUNCTIONAL TEST (30 sec)= every 28 days AUTONOMY TEST (1h)= every 26 weeks Even lamps carry out the autonomy test 1 week after the odd lamps. (0,2,…,8,A,C,E)= even; (1,3,…,9,B,D,F)= odd

FIXED GREEN: BATTERY CHARGED
FLASHING GREEN: BATTERY CHARGING
ONE RED FLASH: BATTERY ERROR DURATION
TWO RED FLASHES: LIGHTING LED ERROR THREE RED FLASHES BATTERY DISCONNECTED

The communication remains possible for 2 hours and for 1 min the LED flashes orange to signal the communication opening.The Functional Test and the Functional STOP Test are controlled by the B.Connect App at any time without having to open communi- cation with the device.

WARNINGS – GUARANTEE

This device shall be used exclusively for the purpose for which it has been Any other use is considered improper and the-refore dangerous.
Rechargeable battery and LED source are non-replaceable type. Contact an authorised technical service centre for any repairs pos- sibly required use only original spare

The lacked respect of the above conditions may compromise the safety of the device.
* Caution** : electric shock