INVENTUM IKI6008 Induction Hob User Manual

INVENTUM IKI6008 Induction Hob

Product Information

The IKI6008/IKI6008MAT is an induction hob with a cooking zone and a control panel. The cooking zone is designed to prepare food using magnetic induction technology. The appliance comes with a safety feature, pandetectiefunctie, which prevents the appliance from operating if it detects an unsuitable or non-magnetic pan on the cooking zone.
The control panel features a selection knob, operation indicator, slide knob, child lock button, on/off button, boost button, timer indicator, and timer knob. The selection knob is used to select the cooking zone, the slide knob is used to adjust the power level or temperature, and the timer knob is used to set the timer. The boost button is used to increase the power level temporarily.

Product Usage Instructions

How to use this document

1. Read this entire document carefully to understand all the instructions.
2. Follow the safety instructions to prevent injury or damage to the appliance and its surroundings.
3. Perform all procedures in the given order.
4. Keep this document in a safe place for future reference as it is an integral part of the appliance.

Symbols used in this document

injury or death.
🚨| Caution| Indicates that failure to follow the instructions can lead to
damage to the appliance.
💡| Note| Used to provide additional information.
⚡️| Electric shock hazard| Indicates the possibility of an electric shock.
🔥| Hot surface hazard| Indicates the possibility of personal injury due to hot
surface.

Safety instructions

Follow these safety instructions to prevent injury or damage to the appliance and its surroundings:

• Do not allow small children near or around the appliance while it is in use or immediately after use as the surface may still be hot.
• Do not heat sealed containers in the appliance as they may explode due to pressure buildup and cause injury.
• Do not leave anything unattended on the appliance as it may cause a fire.
• Do not cook with oil or fat on an unattended appliance as it may cause a fire.

Usage instructions

Follow the instructions below for using the IKI6008/IKI6008MAT induction hob:

1. Select a suitable pan for cooking. The pan must be magnetic and have a flat bottom that fits the size of the cooking zone.
2. Place the pan on the selected cooking zone.
3. Turn on the appliance by pressing the on/off button.
4. Select the desired cooking zone by turning the selection knob.
5. Adjust the power level or temperature by sliding the slide knob.
6. To temporarily increase the power level, press the boost button.
7. Set the timer by turning the timer knob. The timer indicator displays the set time.
8. When cooking is complete, turn off the appliance by pressing the on/off button. Remove the pan from the cooking zone.

Cleaning and maintenance instructions

Follow these instructions to clean and maintain your induction hob:

• Clean the appliance only when it has cooled down completely.
• Use a soft cloth or sponge with mild detergent to clean the surface of the appliance. Do not use abrasive cleaners or steel wool as they may scratch the surface.
• Do not immerse the appliance in water or any other liquid.
• Remove any food spills immediately to prevent them from burning onto the surface and becoming difficult to remove.

Note that using an inferior quality pot or an induction adapter plate for non- magnetic pans will void the warranty, and the manufacturer will not be liable for any damage caused to the appliance or its surroundings.
Dispose of the appliance in an environmentally friendly way by following the Waste Electrical and Electronic Equipment (WEEE) directive, which outlines the framework for returning and recycling used appliances throughout the European Union.

Introduction

HOW TO USE THIS DOCUMENT

1. Read this document completely. Make sure that you know and understand all the instructions.
2. Obey the safety instructions to prevent injury and/or damage to the appliance and its surroundings.
3. Do the procedures completely and in the given sequence.
4. Keep this document in a safe area for future use. This document is a part of the appliance.

SYMBOLS USED IN THIS DOCUMENT

Safety

GENERAL SAFETY INSTRUCTIONS

• Fully read the instruction manual prior to using the appliance.
• Carefully store the instruction manual for future reference.
• Only use this appliance for the purposes described in the instruction manual.
• Children are not allowed to play with the appliance.
• Do not store objects that might be of interest to children in cabinets above or behind the appliance. · If the safety instructions and warnings are not observed, the manufacturer cannot be held liable for any resulting damage.
• Damage as a result of incorrect connection, incorrect fitting or incorrect use does not fall under the warranty.

SAFETY INSTRUCTIONS FOR INSTALLATION

• Do not store flammable objects or substances in a drawer below the appliance. Make sure that there is enough clearance between the underside of the appliance and the contents of any drawer.

• Do not install the appliance above a dish washer or washing machine. Steam may cause damage to the appliance.

• The appliance may only be fitted by a certified installer.

• The electrical connection must meet national and local
  regulations.

• The mains socket and mains plug must always be within reach.

• The appliance may not be connected to the mains supply via a power strip or extension cable. If this is not observed, the safety of the appliance cannot be guaranteed. · The appliance must always be earthed.

• The mains cable should be freely suspended and may not come into contact with a drawer.

• The worktop in which the appliance is installed must be level.

• The walls and the worktop around the appliance must be heat resistant to at least 90°C. Even if the appliance itself does not get hot, the heat of a hot pan could discolour or deform the wall.

• Be aware that the glue that join plastic or wooden materials to the kitchen unit, has to resist temperatures to at least 150°C, to avoid the paneling getting unstuck.

SAFETY INSTRUCTIONS FOR OPERATION

• Do not store flammable objects or substances in a drawer below the appliance. Make sure that there is enough clearance between the underside of the appliance and the contents of any drawer.
• Do not install the appliance above a dish washer or washing machine. Steam may cause damage to the appliance.
• The appliance may only be fitted by a certified installer.
• The electrical connection must meet national and local regulations.
• The mains socket and mains plug must always be within reach.
• The appliance may not be connected to the mains supply via a power strip or extension cable. If this is not observed, the safety of the appliance cannot be guaranteed.
• The appliance must always be earthed.
• The mains cable should be freely suspended and may not come into contact with a drawer.
• The worktop in which the appliance is installed must be level.
• Do not store flammable objects or substances in a drawer below the appliance. Make sure that there is enough clearance between the underside of the appliance and the contents of any drawer.
• Do not install the appliance above a dish washer or washing machine. Steam may cause damage to the appliance.
• The appliance may only be fitted by a certified installer.
• The electrical connection must meet national and local regulations.
• The mains socket and mains plug must always be within reach.
• The appliance may not be connected to the mains supply via a power strip or extension cable. If this is not observed, the safety of the appliance cannot be guaranteed.
• The appliance must always be earthed.
• The mains cable should be freely suspended and may not come into contact with a drawer.
• The worktop in which the appliance is installed must be level.

SAFETY INSTRUCTIONS FOR OPERATION

• Only use the appliance for preparing food.
• The appliance is not suitable for heating rooms.

Warning:
Hot surface

• The appliance and its accessible parts become hot during and after use. Avoid touching hot surfaces. Keep children younger than 8 years of age out of the vicinity, unless they are supervised at all times.
• The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
• Children are not allowed to play with the appliance.
• Do not sit, stand or climb on the appliance.
• The cooking zones get hot when used and remain hot for a period after use. Do not allow small children in the vicinity during and immediately after cooking.
• Do not open the base unit of the appliance.
• Do not heat up closed cans on the appliance. This creates overpressure, as a result of which the cans may explode. You could injure yourself as a result.

Warning:

Risk of fire.
Do not leave anything standing on the appliance unattended.
There is a risk of fire.

Warning:

Risk of fire.
Cooking with fat or oil on an unattended appliance can be dangerous and could result in fire.

• Be careful not to burn yourself while or after using the appliance.

• Make sure that no cable of any fixed or moving appliance contacts the glass or a hot saucepan.

• Do not extinguish a fat or oil fire with water. Switch off the appliance and cover the flames with a lid or fire blanket.

• Do not store items on the appliance.

• Do not place a hot container on the control panel.

• If a drawer is situated under the embedded appliance, make sure that the space between the content of the drawer and the inferior part of the appliance is large enough (50 mm). This is essential to guarantee correct ventilation.

• Do not put any inflammable object (for example sprays) into the drawer situated under the appliance. A cutlery drawer must be heat resistant.

• Do not use the appliance outdoors.

• Do not use the appliance as a worktop. The appliance can be switched on by accident or still be hot, which means that objects could melt, get hot or catch fire.

• Do not cover the appliance with a cloth or something similar. If the appliance is still hot or is switched on, there is a fire hazard.

• If the appliance is used for the first time, it will smell new. This is normal. The smell will disappear through ventilation.

• Do not use the appliance when the glass plate is broken.

• Do not operate the appliance with an external timer or a separate remote control system

• Do not place metal objects such as knives, forks, spoons and lids on the surface of the hob. The items may become hot.

• Make sure that you switch off the appliance when removing a pan.

• Be careful not to drop items on the glass plate. The glass plate may break as a result.

• Raw pan bottoms or damaged saucepans (not enamelled cast iron pots) may damage the glass plate. Always lift the pan off the appliance, do not slide or it may scratch the glass.

• Sand or other abrasive materials may damage the glass plate.

• Do not hit the edges of the glass with saucepans.

• Do not put or leave empty saucepans on the hob.

• If the surface is cracked, switch off the appliance to avoid the risk of an electric shock.

• Be aware of a fast heating time when you use the appliance at a high power level. Always remain nearby after adjusting a cooking zone to a higher power level.

• The appliance complies with electromagnetic safety standards.
  When using the induction hob, always keep magnetic objects (credit cards, disks, watches, etc.) away from the appliance. We recommend wearers of pacemakers or other electrical implants to consult their doctor first.

• If the mains cable is damaged, it may only be replaced by the manufacturer, its service organisation or similarly qualified persons, in order to prevent hazardous situations.

SAFETY INSTRUCTIONS FOR CLEANING AND MAINTENANCE

• The appliance may not be cleaned or maintained by children, unless this is done under supervision.
• Do not use a high pressure cleaner or steam cleaner to clean the appliance.
• Defective parts may only be replaced by original parts. Only for those parts will the manufacturer be able to guarantee that they meet the safety requirements.
• The appliance has sharp edges, be careful during cleaning and maintenance.
• Always disconnect the appliance from the mains supply before carrying out any work or maintenance on it.

Note:
The use of poor quality pot or any induction adapter plate for non-magnetic cookware results in a warranty breach. In this case, the manufacturer cannot be held responsible for any damage caused to the hob and/or its environment.

ENVIRONMENTALLY-FRIENDLY DISPOSAL

Note:

• Recycling – WEEE
• Dispose of packaging in an environmentally-friendly manner.
• This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Description

INTENDED USE

The appliance is intended to used for preparing food.
Do not use the appliance for any other purpose than described in this document.

INDUCTION HOB

• A Cooking zone
• B Control panel

CONTROL PANEL

• A Selection button
• B Operation indicator
• C Slider
• D Child lock button
• E On/off button
• F Booster button
• G Timer indicator
• H Timer button

SAFETY PROVISIONS

Pan detection mode
With the pan detection mode, the appliance does not work if you use an unsuitable pan or if the appliance does not detect a pan on a cooking zone. The operation indicator shows U and it is not possible to increase the power level.

Residual heat indicator
After stopping the appliance, the cooking zones stay hot. If you touch a hot cooking zone this may result in injury.
The operation indicator shows H to indicate the cooking zone is hot. When the cooking zone is cool, the operation indicator no longer shows H.

Installation

SAFETY INSTRUCTIONS FOR INSTALLATION

• Make sure that the appliance is assembled correctly. Incorrect assembly may lead to dangerous situations. The installer is liable for damage caused during incorrect assembly.

• Only a qualified electrician is allowed to electrically connect the appliance.

• The appliance must be installed according to national and regional safety instructions.

• The appliance has protection class I and may only be used in combination with an earthed connection.
  The manufacturer is not liable for the unsuitable operation and possible damage caused by unsuitable electric installations.

• The appliance must be connected to a permanent installation in which provisions for switching off are integrated, in accordance with the installation instructions.

• The appliance may only be installed above a drawer or an oven with forced ventilation. There must be a minimum distance for ventilation.

• Do not install the appliance above a refrigerator, oven without ventilation, washing machine or dishwasher.

• Make sure that the mains cable does not get jammed during installation or is running along sharp edges. If an oven is installed below it, make sure that the mains cable goes via the rear corners of the oven to the connection box. The mains cable must be placed in such a way that no contact is made with hot parts of the appliance or the oven.

• The connection point, mains socket and/or mains plug must always be accessible.

• The worktop on which the appliance is placed must be flat, horizontal and stable. Observe the instructions from the manufacturer of the worktop.

• In case of incorrect installation or connection, the warranty becomes invalid.

• Any change to the appliance, including replacement of the mains cable, must be performed by a certified installer.

UNPACKING

1. Remove the packaging.
2. Examine the appliance for damage.
3. Make sure that the voltage is the same as on the type plate.

PREPARING FOR INSTALLATION

1. Make sure that there is sufficient space available around the appliance. _

_

2. Make sure that the worktop is prepared according to the dimensions of the appliance (A and B).
   Note:
   Keep a safety distance of at least 3 mm between the sides of the hob and the inner surfaces of the worktop.

MAKING VENTILATION OPENINGS

The electronics in the appliance require cooling. The appliance will automatically switch off when there is insufficient ventilation.
Caution:
Do not block the ventilation openings of the appliance.

Making the openings

1. Make an opening at the rear of the kitchen unit. Make sure that there is a space of 20 mm between the back wall and any drawers.
   

2. Also keep 20 mm of space when there are no drawers, but an oven.

3. Make sure that there is a space of 50 mm between the appliance and the drawer or oven. Refer to Figure 8 and 9.

4. Make sure that the worktop has a minimum thickness of 30 mm. Refer to Figure 8 and 9.

5. Make sure the cross bar does not hinder the air flow. Cut or saw the cross bar diagonally if necessary.

CONNECTING THE APPLIANCE

The appliance includes a power cord with a plug. The connection is a 1-phase connection.

1. Make sure that the electrical system is suitable for the load of the appliance.
2. Make sure that the mains socket is grounded.

INSTALLING THE APPLIANCE

Preliminary requirements

| • Make sure that the installation surface is prepared according to the correct dimensions. • Make sure that the ventilation openings are made.
---|---

Procedure

1. Remove any dirt from the worktop.

2. Apply a sealant to the edges of a wooden or plastic worktop to prevent damage as a result of moisture.

3. Put the appliance head down on the worktop.

4. Remove the protective film (B) from the tape (A) and put it around the appliance. Make sure
   there is a distance of 2 mm to the edge of the glass.

5. Install the fastening brackets (A) to the appliance. Use the screws.

6. Put the appliance in the opening of the worktop.

7. Connect the appliance to the mains supply. After connecting the display lights up for a short time. The appliance is ready for use.

REMOVING THE APPLIANCE

1. Disconnect the appliance from the mains supply.
2. Push the appliance up to remove it.

Operation

The appliance has electronic sensors that activate when you touch the buttons on the control panel. The appliance makes a sound when a control is touched.

Caution:
Only use pans that are suitable for an induction appliance. Refer to section ‘Requirements for pans’.

PREPARING FOR OPERATION

1. Clean the appliance before operation. Use a damp cloth.

MAXIMUM POWER

The appliance has a maximum power of 3500 watts. The power will be divided between all four cooking zones. It is possible that the maximum available power for the cooking zones together is exceeded. This can cause “switching” of the power between the cooking zones. In that case, the power of the second cooking zone will be decreased automatically. When you use three or four cooking zones at once, the power level will decrease even further down.

The corresponding operation indicator will flash to show necessary power reduction. It flashes for 3 seconds andduring that time further adaptations of the setting are allowed before the power is automatically reduced.

NOTE: when you have one cooking zone on power level 9, you can add a second cooking zone on maximum power level 8. When another cooking zone is added, the power levels of the other two cooking zones will further decrease.

STARTING THE APPLIANCE

1. Touch the on/off button to start the appliance. The indicators show “-”/ “–”.

Note:
If you do not select a cooking zone within 1 minute, the appliance automatically switches off.

USING A COOKING ZONE

Selecting a cooking zone

1. Put a pan on the cooking zone.
2. Touch the selection button of the cooking zone.
3. Touch the slider to increase and decrease the power level. The operation indicator shows the set power level.

Note:
If you do not select a power level within 1 minute, the appliance automatically switches off

Stopping a cooking zone

1. Touch the slider to decrease the power level to 0.

Note:
The operation indicator shows H to indicate the cooking zone is still hot.

Note:
Always lift the pan off the appliance, do not slide it, or it may scratch the glass.

USING THE BOOSTER MODE

The booster mode provides extra power to a cooking zone and can be activated for one cooking zone at a time.

Note:
If you select another cooking zone during the booster mode, the power is more than the maximum
available power of the appliance. The booster mode stops automatically.

Starting the booster mode

1. Select a cooking zone.
2. Touch the booster button B to set the power level to the maximum. The operation indicator shows P.

The booster mode now works for 5 minutes. After 5 minutes, the power level returns to 9.

Stopping the booster mode

1. Select the cooking zone with the active booster mode.
2. Touch the booster button B to cancel the booster mode. The operation indicator shows the set power level.

LOCKING AND UNLOCKING THE APPLIANCE

When the appliance is locked, you cannot operate the touch buttons.

Locking the appliance

1. Make sure that the appliance is on.
2. Touch the child lock button. The operation indicator shows Lo when the appliance is locked.

Unlocking the appliance

1. Make sure that the appliance is on.
2. Touch the child lock button again for a few seconds. The operation indicator stops showing Lo when the appliance is unlocked.

USING THE COOKING TIMER

Note:
You can use the timer with different settings simultaneously for more than one cooking zone.
Note:
When the timer finishes, the timer display shows “–” and you hear a sound signal.
Note:
The cooking zone will automatically switch off when the timer is finished.

Starting the cooking timer

1. Select a cooking zone.
2. Touch the slider to set the power level.
3. Touch the timer button to start the cooking timer. The timer display shows 10 and “0” flashes.
4. Touch the slider to set the time of the right digit.
5. Touch the timer button again. The left digit “1” flashes.
6. Touch the slider to set the time of the left digit. The timer display shows the set time.
7. When the cooking timer is set, the timer indicator stops blinking. The dot next to the power level, indicates a timer is set for that cooking zone.
8. Repeat the procedure for another cooking zone.

Stopping the cooking timer

1. Select a cooking zone.
2. Touch the timer button. The timer display shows the remaining time.
3. Touch the slider to set the timer to “00”. The timer is cancelled.
4. Repeat this procedure for another cooking zone.

USING THE COOKING ALARM

Note:
The time of the cooking alarm can be set from 0 to 99 minutes.
Note:
When the alarm finishes, the timer display shows“–” and you hear a sound signal. The sound signal automically stops after 30 seconds. You can also touch any key to stop the sound signal.
Note:
The cooking alarm is not connected to a cooking zone and can be operated as long as the hob is actively in use.

Starting the cooking alarm

1. Make sure the appliance is on.
2. Touch the timer button to start the cooking timer. The timer display shows 10 and “0” flashes.
3. Touch the slider to set the time of the right digit.
4. Touch the timer button again. The left digit “1” flashes.
5. Touch the slider to set the time of the left digit. The timer display shows the set time.
6. When the cooking alarm is set, the timer indicator stops blinki

STOPPING THE APPLIANCE

1. Touch the on/off button to switch off the appliance. The operation indicator is off or shows H.

Cleaning and maintenance

DAILY CLEANING

Warning :
Make sure that all cooking zones are cool before cleaning the appliance.
Warning:
When you spill sugar, clean the appliance immediately to prevent burns on the surface. Be careful, the cooking zones may be hot.
Caution:
Do not use abrasive cleaning agents, spray cans, scrourers or sharp objects

1. Lock the appliance.
2. Remove food stains. Use a damp cloth and a mild cleaning agent.
3. Clean the appliance daily. Use a damp cloth and a mild cleaning agent.
4. Dry the appliance. Use paper towels or a dry tea towel. 5. In case of heavy dirt, clean the appliance with a special cleaning agent suitable for an induction appliance.
5. In case of spillovers on the controls, the appliance may beep and turn itself off. Soak up the spill and dry the area before turning the appliance back on.

Extra information

REQUIREMENTS FOR PANS

Note:
Pans that were previously used on a different appliance (for example a gas appliance) are no longer suitable for an induction appliance.

• Use pans with a thick and flat bottoms. The diameter of the pan must be the same as the diameter of the cooking zone.
•  Use pans made from metal, enameled metal, cast iron or stainless steel. These pans give the best result.
• Obey the instructions from the manufacturer of the pan to see if the pan is suitable for an induction appliance.
• Pans made from metal or aluminum pans with a copper bottom may stain the glass plate. Remove the possible stains immediately after using the appliance.
• Use a magnet to check if a pan is suitable for an induction appliance. The pan is suitable if the magnet sticks to the bottom of the pan.
• Make sure that you put the pan in the center of the cooking zone.
• Some pans may produce sounds during use. The sounds are caused by the shape of the pan. This does not affect the operation or safety of the appliance.
• Never slide pans over the appliance, always lift the pans to avoid scratching the glass.

POWER LEVELS FOR COOKING

Note:
The values are indicative.

Troubleshooting

GENERAL TROUBLESHOOTING PROCEDURE

1. Try to find a solution for the problem with the help of the troubleshooting table and the breakdown codes.
2. If you cannot find a solution for the problem or the breakdown code keeps re-occuring, contact Inventumservicedienst

TROUBLESHOOTING TABLE

• Do a check if the mains plug is correctly connected to the mains socket.
• Make sure that the mains supply is on.

The appliance is locked.| Unlock the appliance. Refer to section ‘Locking and unlocking the appliance’.
The touch buttons are covered with water or dirt.| Clean the appliance. Refer to section

‘Daily cleaning’.

The operation indicator on the control panel shows U.| There is no pan on the cooking zone.| Put a pan on the cooking zone.
The pan is not suitable for an induction appliance.| Use a pan that is suitable for an induction appliance. Refer to section ‘Requirements for pans’.
A cooking zone switches off automatically. The operation indicator shows H.| The maximum cooking time is reached. Refer to section ‘Automatic switch-off times’.|

1. Start the appliance. Refer to section ‘Starting the appliance’.
2. Select a cooking zone. Refer to section ‘Using a cooking zone’.

The operation indicator on the control panel shows Lo.| The appliance is locked.| Unlock the appliance. Refer to section ‘Locking and unlocking the appliance’.

BREAKDOWN CODES

The breakdown codes are shown on the timer indicator on the control panel.

restarting it.
E7 / E8| There is a defect in the mains supply.| Do a check on the voltage of the mains supply.
U| There is no pan on the appliance or the pan is not suitable for an induction appliance.| Place a pan or use a pan that is suitable for an induction appliance. Refer to section ‘Requirements for pans’.
The appliance or a cooking zone has turned itself off unexpectedly, a tone sounds and a breakdown code is displayed.| A technical defect.| Please write down the breakdown code, unplug the appliance and contact Inventum- servicedienst.

Technical data

FUNCTIONS

DIMENSIONS

COOKING ZONES

ENERGY CONSUMPTION

(*) calculated according to the method of measuring performance (EN 60350-2)

ELECTRICAL SPECIFICATIONS

AUTOMATIC SWITCH-OFF TIMES

Warranty

General terms and conditions of service and warranty

We do not need to remind you of the importance of service. After all, we develop our products to a standard so that you can enjoy them for many years, without any concerns. If, nevertheless, there is a problem, we believe you are entitled to a solution straight away. Hence our products come with an exchange service, on top of the rights and claims you are entitled to by law. By exchanging a product or part, we save you time, effort and costs.

2-year full manufacturer’s warranty

1. Customers enjoy a 2-year full manufacturer’s warranty on all Inventum products. Within this period, a faulty product or part will always be exchanged for a new model, free of charge. In order to claim under the 2-year full manufacturer’s warranty, you can either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at ”.
2. The 2-year warranty period starts from the date the product is bought.
3. In order to claim under the warranty, you must produce a copy of the original receipt.
4. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

5-year Inventum warranty

1. Inventum offers a 5-year warranty on most large domestic appliances and a selection of small domestic appliances. This 5-year Inventum warranty consists of a 2-year full manufacturer’s warranty, extended by a further 3-year warranty. The only thing you need to do to qualify for the 3-year extended warranty is to register the product within 45 days of purchase. You can read more about registering the product in the following paragraph.
2. In accordance with the 5-year Inventum warranty provisions, a faulty product or part will always be exchanged for a new model during the first 2 years under the warranty. During the 3rd to 5th year under the warranty, you will only pay the costs of exchange. The current costs of exchange are listed at ”.
3. In order to claim under the 5-year Inventum warranty, you can either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at ”.
4. The 5-year warranty period starts from the date the product is bought.
5. In order to claim under the warranty, you must produce a copy of the original receipt.
6. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

Product registration

1. The 3-year extended warranty is easy to obtain, free of charge, by registering the product within 45 days of purchase, via the website ”. If you did not register the product within 45 days of purchase, you can still do so up to 2 years after the purchase date. However, there will be a charge. The one-off registration charge is 89 for each separate product. Registration is possible only for products that are subject to the 5-year Inventum warranty. Whether the product qualifies for the 5-year Inventum warranty is stated in the product user manual and in the product information sheet, on Inventum’s website.
2. The warranty period always starts from the date the product is bought. If the product is registered for the extended warranty at a later date, the warranty period still starts from the original date of purchase. 3. The 3-year extended warranty can only be applied for if you are in the possession of a copy of the original receipt and the Inventum 5-year warranty certificate.

Large domestic appliances

1. Breakdowns or faults in large domestic appliances (separate and built-in white goods) can be registered via the form at ”, by calling the Inventum costumer service department or in the store where you bought the device. The telephone number of the costumer service department can be found at ”.
2. In the event of breakdowns or faults in large domestic appliances, Inventum will have the option to have a service engineer inspect the faulty device onsite at the customer in the Netherlands and to carry out repairs, there and then. The Inventum customer service department can also decide to have the device exchanged.
3. If you suffer a breakdown or fault in a large domestic appliance during the first 2 years from the date of purchase, Inventum will not charge any costs for the exchange, call-out or for parts and labour.
4. If you registered the product as described before at ” and you subsequently report a breakdown of a large domestic appliance in the 3rd to 5th year of the date of purchase, the 5-year Inventum warranty applies and the device will be repaired or exchanged, free of charge. In the event of a repair or exchange of the device, you only pay the costs of exchange. The current costs of exchange are listed at ”. If you did not register the product, the 3-year extended warranty does not apply.
5. When reporting a breakdown or fault, a service engineer will contact the customer within 1 working day in order to make an appointment. When the report is made in a weekend or during a public holiday, this will be the next working day.
6. If you report a breakdown or fault via the form at ”, you will be kept informed of the progress via mobile messages and e-mail.
7. The warranty period starts from the date the product is bought. 8. In order to claim under the warranty, you must produce a copy of the original receipt and the Inventum 5-year
   warranty certificate. 9. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

Breakdowns or faults outside the warranty period

1. Breakdowns or faults in small or large domestic appliances outside the warranty period, can be reported to the costumer services department via the form at ” or by calling the costumer services department.
2. The costumer services department may ask you to send the product for inspection or repair. The costs of dispatch will be at your expense.
3. The inspection to establish whether repair is possible involves a charge. You need to grant your permission for this, in advance.
4. In the event of a large domestic appliance, Inventum, at your request, can send out a service engineer. In that case, you will be charged the call-out costs, as well as parts and labour.
5. In the event of an instruction to repair, the repair costs must be paid in advance. In the event of a repair by a service engineer, the costs of the repair must be settled with the engineer onsite, preferably by means of PIN payment.

Warranty exclusions

1. The following is excluded from the aforesaid warranties:
2. normal wear and tear;
3. improper use or misuse;
4. insufficient maintenance;
5. failure to comply with the operating and maintenance instructions;
6. unprofessional installation or repairs by third parties or the customer himself;
7. non-original parts used by the customer;
8. use for commercial or business purposes;
9. removal of the serial number and/or rating label.
10. In addition, the warranty does not apply to normal consumer goods, such as:
11. dough hooks, baking tins, (carbon) filters, etc.;
12. batteries, bulbs, carbon filters, fat filters, etc.;
13. external connection cables;
14. glass accessories and glass parts such as oven doors;
15. and similar items.
16. Transport damage not caused by Inventum is also excluded. Therefore, inspect your new device before starting to use it. If you detect any damage, you must report this to the store where you purchased the product within 5 working days, or to the Inventum customer service department via the form at ”. If transport damage is not reported within this period, Inventum does not accept any liability in this respect.
17. The following are excluded from warranty and/or replacement: faults, loss of, and damage to the device as a result of an event that is normally insured under the home contents insurance.

Important to know

1. The replacement or repair of a faulty product, or a part thereof, does not lead to an extension of the original warranty period.
2. Parts that have been replaced, packaging material, and exchanged devices are taken back by the service engineer and become the property of Inventum.
3. If a complaint is unfounded, all costs arising from it will be at the customer’s expense.
4. Following the expiry of the warranty period, all costs of repair or replacement, including administration costs, dispatch, and call-out charges, will be charged to the customer.
5. Inventum cannot be held liable for damage as a result of devices built in incorrectly.
6. Inventum cannot be held liable for damage caused by external events unless this liability arises from mandatory statutory provisions.
7. These warranty and service provisions are governed by Dutch law. Disputes will be settled exclusively by the competent Dutch court.

Inventum Huishoudelijke Apparaten B.V.
Postbus 5023 6802 EA Arnhem
www.inventum.eu
instagram.com/inventum1908
facebook.com/inventum1908
youtube.com/inventum1908
IKI6008-IKI6008MAT/01.0822
Modifications and printing errors reserved

References

• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>