INVENTUM VR1682B Freestanding Freezer User Manual
- June 1, 2024
- INVENTUM
Table of Contents
INVENTUM VR1682B Freestanding Freezer
Reversing The Door Opening
Tools you will need
The door of the appliance can be opened on the right or left side. In order to reverse the door opening, please observe the instructions below. It would be best to do this with two people.
Attention: remove the plug from the socket. Remove all items from the freezer before reversing the door opening.
-
Remove the guard cover from the upper hinge and unscrew the screws from the hinge.
-
Remove the left cover plate from the top.
-
Move the cover cap from the left to the right side of the door. Carefully lift the door from the lower hinge and place it on a blanket or something similar to prevent scratches.
-
Unscrew the screws from the lower hinge. Remove both adjustable feet.
4a. Screw the pen out of the lower hinge and turn the hinge around by 180 degrees.
4b. Then screw the pen back in the lower hinge.
-
Place the bracket at the lower hinge again. Attach both adjustable feet.
-
Place the door against the appliance and make sure the bottom side is properly placed on the lower hinge. Make sure the door is straight in relation to the exterior of the freezer. Place the upper hinge and screw tight.
-
Place the guard cover and cover plate.
-
Carefully remove the door rubbers and rotate them 180° before you attach them again. Allow the appliance to rest for approx. 3 hours before inserting the plug in the socket.
Safety instructions
- Carefully and fully read the instruction manual prior to using the appliance and carefully store the manual for future reference.
- Only use this appliance for the purposes described in the instruction. The appliance is suitable for storing food. It is possible to freeze fresh food in the freezer section.
- Only connect the appliance to alternate current, to an earthed wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
- The appliance falls under protective class I and may only be used in combination with an earthed connection. The manufacturer is not liable for unsuitable operation and possible damage caused by unsuitable electric installations.
- Make sure that children are unable to play with the appliance, such as hide in it. This is dangerous.
- Keep the appliance out of reach of children. Children do not see the dangers when handling electrical appliances. Therefore, never allow children to work with electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
- The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
- The appliance may not be cleaned or maintained by children, unless this is done under supervision.
- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- Never bend the power cord sharply or allow it to run across hot parts.
- Make sure that the power supply cable does not get jammed during installation or is running along sharp edges.
- The connection point, socket and/or plug must always be accessible.
- Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the shop or our technical service. Never replace the plug or cord yourself.
- The appliance must be moved and installed by two or more persons.
- When moving the appliance, do not lift it or pull the doors or handles.
- Be careful when moving the appliance to prevent the floor from getting damaged.
- During installation, do make sure the power cable is not damaged.
- Check that the appliance is not placed too close to a heat source.
- Do not place heat generating appliances such as (microwave) ovens on top of the appliance.
- In order to ensure proper ventilation, a free space of 10 cm should be maintained around the appliance.
- Install the appliance on a sturdy, flat and stable surface.
- Install the appliance in a dry and well ventilated room. The appliance is intended for use in a room where the ambient temperature falls within the applicable class, depending on the climate class found on the information plate on the back of the appliance.
Climate class| Ambient temperature
---|---
SN| From 10°C to 32°C
N| From 16°C to 32°C
ST| From 18°C to 38°C
T| From 18°C to 43°C - Never cover the ventilation openings.
- Do not store explosive or highly flammable substances in the appliance. The vapours could cause a fire hazard or an explosion.
- Do not store glass bottles or jars with liquids in the freezer, as they could break when frozen.
- Do not use mechanical, electrical or chemical agents to speed up the defrosting process.
- Repairs to electrical appliances should only be performed by skilled persons.
- Only use the appliance indoors.
- Always remove the plug from the socket when the appliance must be cleaned or repaired.
- Never use the appliance with parts that are not recommended or supplied by the manufacturer.
- Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the plug with wet or moist hands.
- Be careful with ice cubes and ice pops. If these are consumed directly out of the freezer, there is a risk of frostbite.
- Never submerge the appliance, cord or plug in water.
- Never clean the appliance with a high pressure cleaner or steam cleaner.
- The appliance cannot be used with a timer or separate remote control.
- This appliance is intended for household and similar use, such as:
- in staff kitchens, shops, offices and other work environments;
- by guests of hotels, motels and other residential environments;
- in Bed & Breakfast type environments;
- farms.
- If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit
of the appliance, a natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, ensure that none of
the components of the refrigerant circuit becomes damaged. The refrigerant
(R600a) is flammable.
WARNING: Refrigerators contain refrigerant and gases in the insulation.
Refrigerant and gases must be disposed of professionally as they may cause eye
injuries or ignition. Ensure that tubing of the refrigerant circuit is not
damage prior to proper disposal.
WARNING: Risk of fire/ flammable materials
If the refrigerant circuit should be damaged:
- Avoid open flames and sources of ignition.
- Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire, and/or electric shock.
INFORMATION ABOUT HOW TO AVOID FOOD CONTAMINATION
To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that come in contact with food and accessible drainage systems.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes
- One-, two- and three-star compartments are not suitable for the freezing of fresh food.
Order| Compartments TYPE| Target storage temp.[°C]| Appropriate food
---|---|---|---
1| Fridge| +2 ~ +8| Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, drinks and other foods are not suitable for freezing.
2| (…,..) – Freezer| ≤-18| Seafood (fish, shrimp, shellfish),freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worst the taste and nutrition), suitable for frozen fresh food.
3| *-Freezer| ≤-18| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worst the taste and nutrition), suitable for frozen fresh food.
4| -Freezer| ≤-12*| Seafood (fish, shrimp, shellfish),freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worst the taste and nutrition), suitable for frozen fresh food.
5| -Freezer| ≤-6**| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worst the taste and nutrition), suitable for frozen fresh food.
6| 0-star| -6 ~ 0| Fresh pork, beef, fish, chicken, some packaged processed foods, etc.(recommended to eat within the same day, preferably no more than 3 days).Partially encapsulated processed foods (non- freezable foods).
7| Chill| -2 ~ +3| Fresh/frozen pork, beef, chicken, fresh water aquatic products, etc.(7daysbelow 0°C and above 0°C is recommended for consumption within that day, preferably no more than 2days). Seafood (less than O for15days,it is not recommended to store above0°C).
8| Fresh food| 0 ~ +4| Fresh pork, beef, fish, chicken, cooked food, etc.(recommended to eat within the same day, preferably no more than 3 days).
9| Wine| +5 ~ +20| Red wine, white wine, sparkling wine, etc.
NOTE:
Please store different foods according to the compartments or target storage temperature of your purchased products..
- f the refrigerating appliance is left empty for long periods, switch off. Defrost, clean and dry it and leave the door open to prevent mould developing within the appliance.
Water dispenser cleaning (special for water dispenser products):
- Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
WARNING
- Food needs to be packed in bags and liquids in bottles or capped containers before putting into the refrigerator to avoid the problem that the inside of the appliance is not easy to clean.
ENVIRONMENTAL PROTECTION
The appliance is energy-efficient. Save even more energy when using the appliance with the following tips, and how to dispose of your appliance in an environmentally-friendly way.
Saving energy
- A high ambient temperature will have a negative effect on the energy consumption. Direct sunlight and other heat sources near the appliance also have a negative effect.
- Keep ventilation holes free. Covered and dirty holes cause a high energy consumption. Ensure sufficient space around the refrigerator, so that a proper ventilation and air flow around the appliance is possible.
- Do not open the doors of the appliance more often than necessary and leave the doors open as briefly as possible.
- The distance between the shelves and the rear wall ensures a free air circulation. Do not place food against the rear wall.
- Set the thermostat to a lower setting if circumstances allow.
- Allow cooked food that you want to store in the appliance to cool down to room temperature before placing it in the appliance.
- A door rubber that does not close properly could increase the energy consumption. Therefore, have it replaced by a qualified person in time.
- If the instructions are not observed, this could lead to a higher energy consumption.
Environmentally-friendly disposal
Recycling – WEEE
- Dispose of packaging in an environmentally-friendly manner.
- This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Product Description
- Thermostat
- Pizzadraw
- Freezer drawers
- Adjustable feet
- Door
Prior To First Use
Before using the appliance for the first time, proceed as follows: carefully
unpack the appliance and remove all packaging material and any promotional
stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of
reach of children. After unpacking the appliance, carefully check it for
external damage that may have occurred during transport. Place the appliance
on a sturdy, flat surface and make sure there is sufficient space around it
for sufficient ventilation. A minimum space of 5 cm is required between the
appliance and the surrounding walls.
In this way the appliance is able to release heat properly, cool well and
function in an energy efficient way.
- You can use the adjustable feet to the left and right to level the appliance.
- Turn the adjustable feet clockwise to lower the appliance.
- Turn the adjustable feet counter-clockwise to raise the appliance.
Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the appliance. When placed in a room that is too cold, the freezer will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance to dry for 1 to 2 hours
Installing the door handle
Dimensions and free surrounding space
- Maintain sufficient room at the front to be able to open the door.
- Allow at least 10 mm of space on all sides.
Caution: This freezer is not an appliance that can be built in.
Use
Check that the voltage corresponds with the voltage stated on the information plate and insert the plug in the socket. The control unit of the freezer is on top of the appliance.
Adjusting the temperature
By means of the thermostat you are able to change the temperature in the freezer. The thermostat has five possible positions: -14 °C, -16 °C, -18 °C, -20 °C and -22 °C.
Press the ‘Set’ button to confirm the setting. Each time you press ‘Set’, the setting jumps to the next temperature. After ± 60 seconds, the LED will extinguish, but the set temperature remains active.
We recommend setting the appliance to -18 °C.
The appliance will now cool continuously until the set temperature has been reached. Allow the appliance to reach the set temperature, before filling it with food. Usually this will take 2 to 3 hours.
Super freeze position
Hold down the ‘Set’ button for 3 seconds to switch to the super freeze position. The indicator led at ‘Super’ will light up.
Hold down the ‘Set’ button for another 3 seconds to switch off the super freeze position.
Attention:
The ambient temperature, the frequency of opening the door and the position of the appliance have an effect on the temperature in the appliance. Take this into account when setting the thermostat.
- Do not place hot food in the appliance.
- You should never place hazardous, highly flammable or explosive substances such as alcohol, acetone or petrol in the appliance, because there will be a hazard of explosion.
- Carefully package meat and fish to prevent unpleasant smells.
- Do not place food against the rear wall of the appliance.
- Leave sufficient space between the different foods, to allow the air to circulate properly.
- Do not leave the door open for longer than necessary
Open door alarm
If the door is open for more than 90 seconds, the open door alarm will sound. Close the door or press the ‘Set’ button to switch off the open door alarm.
Tips
- A high ambient temperature will have a negative effect on the energy consumption. Direct sunlight and other heat sources near the appliance also have a negative effect.
- Keep ventilation holes free. Covered and dirty holes cause a higher energy consumption. Ensure sufficient space around the freezer, so that a proper ventilation and air flow around the appliance is possible.
- Do not open the door of the appliance more often than necessary and leave the door open as briefly as possible.
- Set the thermostat to a lower setting if circumstances allow.
- Allow cooked food that you want to store in the appliance to cool down to room temperature before placing it in the appliance.
- Frost or ice will increase power consumption. Therefore, these should be removed regularly once they are 3 to 5 mm thick.
- A door rubber that does not close properly could increase the power consumption. Therefore, have it replaced by a skilled person in time.
- If the instructions are not observed, this could lead to a higher power consumption.
Cleaning And Maintenance
Before cleaning the appliance, switch it off by removing the plug from the socket.
Remove the food from the freezer. Clean the inside of the freezer. Use warm soapy water with a neutral cleaning agent to prevent nasty smells. Wipe the inside of the freezer after cleaning with clean water and properly wipe everything dry. Leave the appliance to dry for 1 to 2 hours. The shelves and drawers can be removed from the freezer easily and washed by hand.
These components may never be cleaned in the dishwasher.
For areas in the freezer that are difficult to clean, such as small openings or corners, it is recommended wiping them clean regularly with a soft cloth or brush. If necessary, a tool can be used, such as thin sticks (cocktail sticks, for example), to make sure no contamination can occur in these areas.
Clean the outside of the freezer and the door rubbers with a soft damp cloth.
Clean the back of the freezer and the surface on which it stands at least once
a year with a vacuum cleaner, so that the ventilation holes remain clean and
the freezer is able to function as well and energy efficient as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic
solvents (such as alcohol, acetone, oil, etc.), boiling water, acid or
alkaline product to clean the freezer, as this could damage the surface or
interior of the freezer. Boiling water and benzene could deform or damage
plastic components.
DEFROSTING
Resolving Failures Yourself
The freezer section of this appliance is free from frost – no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove all products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets.
Remove the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section.
Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section. Do not use sharp metal objects to scrape the freezer section clean, use a plastic ice scraper.
Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting. Place the frozen products back in the freezer section once it has reached the required temperature.
Warning : Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar.
This could lead to unsafe situations and cause irreparable damage to the appliance.
Resolving Failures Yourself
| Failure | Cause | Solution |
|---|---|---|
| The appliance no longer works | The plug is. not in the socket. |
- check that the plug is properly inserted in the socket
- check that the power cable is not damaged
- check that there is voltage on the socket by
- connecting a different appliance, such as a night lamp
Temperature in the freezer is too high or too low| Wrong set ting of the
thermostat.| Turn the thermostat to a different position.
The ambient temperature is higher or lower than the temperature indicated in
the table with technical data.| The appliance is intended for operation in an
ambient temperature indicated in the table with technical data supplied with
the appliance.
The appliance is located in direct sunlight or near a heat source.| Change the
locatio n of the appliance according to the instructions in the instruction
manual.
The ventilation at the rear of the appliance is hindered.| Keep the appliance
10 cm away from the walls, for sufficient ventilation.
The door of the freezer is opened too frequently or remains open for too
long.| Open the door less often and/or reduce the time that the door remains
open.
In the past 24hours, a large amount of warm food has been placed in the
freezer.| Temporarily turn the thermostat to a lower position.
The side of the appliance is very warm.| The condenser of the appliance is
located on the side.| It is normal for the side of the appliance to become
warm.
Unusual or loud noises| The appliance is not level and stable.| Level the
appliance with the adjustable feet.
The appliance is standing against something.| Place the appliance in such a
way that it is not standing against anything.
During normal use of the cooling appliance, different types of noises can occur that do not have any effect on the correct operation of the larder.
Noises that can be heard during normal use of the appliance are caused by the operation of the thermostat, compressor (activation), cooling system (shrinkage and expansion of the material under the influence of temperature differences and flow of cooling liquid).
General Terms And Conditions Of Service And Warranty
5-year Inventum warranty!
- Customers enjoy a 5-year full manufacturer’s warranty on all Inventus products.
- Within this period, a defective product or part, which makes normal functioning of the product or part impossible, will always be repaired free of charge or, if repair is not possible and/or does not provide a solution, replaced (by the same or equivalent product). The assessment of this lies with Inventus.
- In order to make a claim under the 5-year Inventus warranty you must, within two months after discovering the fault or defect, either return the product to the shop where you bought it, or contact the Inventus customer service department by using the form at www.inventum.eu/service.
- The warranty period starts from the date stated on the product’s original sales receipt.
- To invoke the warranty, you must always send a copy of the original proof of purchase with the service request and present the original proof of purchase to the service technician.
- The 5-year warranty applies only to normal domestic use of Inventus products within the Netherlands
Warranty exclusions
- The 5-year Inventum guarantee does not apply in case of: normal wear and tear, consumables, improper use, insufficient or incorrect maintenance, incorrect and/or inexpert assembly and installation of the appliance, repairs by unauthorised third parties, business or commercial use, missing serial number, damage caused by an external cause. This enumeration is not exhaustive.
- B-choice products and products that have been built-in in a showroom are not covered by the 5-year Inventum warranty. All optical damage such as dents, scratches and slight traces of use are excluded from any warranty.
Reporting malfunctions on Inventum products
- Faults or defects on Inventum products can be reported by using the service request form on the website www.inventum.eu/service or through the seller of the product.
- A copy of the original proof of purchase must be included with the request.
- Inventus’s service department determines whether the product will be repaired or replaced, based on the request and the sales receipt.
Important to know
- Products sent without prior notification will not be accepted. Further to the notification you will be informed by Inventum whether a warranty applies and whether you must return the product.
- The replacement or repair of a defective product, or a part thereof, does not lead to an extension of the original warranty period.
- Products eligible for replacement or repair must be emptied and clean.
For a detailed explanation of the warranty conditions and items excluded from them, please visit Inventus’s website www.inventum.eu/algemene- voorwaarden These general warranty and service conditions apply to Inventum brand products purchased after 27 April 2022 and intended for use within the Netherlands.
For Inventum products used outside the Netherlands, but within a EU Member State, the warranty rules of that country apply. Inventum provides warranty and service by a white goods technician only in the Netherlands.
As a consumer, you are entitled by law to a properly working product. Does the product break down sooner than you might expect? This means that the product is not in conformity. In that case, the law offers you, the buyer, with a number of legal remedies for your protection. This legal protection is not affected by the above commercial warranty given by Inventum on Inventum products used within the Netherlands.
Inventum Huishoudelijke Apparaten B.V., Meander 901, 6825 MH Arnhem, The Netherlands
Customer Support
VR1682B/01.0324
Wijzigingen en drukfouten voorbehouden
Änderungen und Druckfehler vorbehalten Sous réserve de modification
Modifications and errors reserved
Inventum Huishoudelijke
Apparaten B.V.
Postbus 5023
6802 EA Arnhem
www.inventum.eu
facebook.com/inventum1908
pinterest.com/inventum1908
youtube.com/inventum1908
instagram.com/inventum1908
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>