PRO DG SYSTEMS i 803 Passive Speaker User Manual
- June 10, 2024
- PRO DG SYSTEMS
Table of Contents
SYSTEMS i 803 Passive Speaker
User Manual
i 803
An updated .pdf version of this manual is always available
Safety Indications
Please read it before use the system and keep for later use
PRO DG SYSTEMS GIVES YOU THANKS FOR ACQUIRE THIS PROFESSIONAL SOUND SYSTEM
FULLY DESIGNED, ASSEMBLED AND OPTIMIZED IN SPAIN, WE WISH THAT YOU ENJOY WITH
ITS HIGH QUALITY AND PERFORMANCE.
-
This system has been designed, fabricated and optimized by Pro DG Systems in perfect working order. To maintain this condition and ensure the right operation, the user must respect the following indications and advices of this manual.
THE FIABILITY, SAFETY AND EFFICIENCY OF THE SYSTEM ARE ONLY AND EXCLUSIVELY GUARANTEED BY PRO DG SYSTEMS IF: -
Assembly, manipulation, re-adjustment and modifications or repairs are carried out by Pro DG Systems.
-
The electrical installation complies with the requirements of IEC (ANSI).
-
The system is used according to the use indications.
WARNING:
- If protectors are opened or sections of chassis are removed, except where this can be done manually, live parts can become exposed.
- Any adjustment, manipulation, optimization or reparation of the system must be done only and exclusively by Pro DG Systems. PRO DG SYSTEMS IS NOT RESPONSIBLE OF ANY DAMAGE OF THE SYSTEM CAUSED BY A MANIPULATION, ADJUSTMENT, OPTIMIZATION OR REPARATION REALIZED BY NO-AUTHORIZED PERSONAL BY PRO DG SYSTEMS
- High loudspeaker levels can cause hearing damage, it must avoid the direct contact with loudspeakers operating at high levels, Otherwise it must use hearing protectors.
MAIN CONNECTION:
- The system is designed for continuous operation
- The set operating voltage must match the local mains supply voltage.
- The unit has to be connected to the main via the supplied power unit or power cable.
- Power unit: never use a damaged connection lead. Any type of damage must be fixed.
- Avoid connection to the mains supply in distributor boxes together with several other power consumers.
- The plug socket for the power supply must be positioned near the unit and must be easily accessible.
PLACE OF SITUATION:
- The system should stand only on a clean and totally horizontal surface.
- The system must not be exposed to any type of vibration during its operation.
- Avoid the contact with the water or wet surfaces. Do not place objects containing liquid on the system.
- Procure that the system has sufficient ventilation and do not block or cover any ventilation opening. Obstruct the ventilation may cause overheating in the system.
- Avoid direct exposure to the sun, as well as proximity to sources of heat or radiation.
- If the system undergoes an extreme change in temperature may affect its operation, before starting the system hope it has reached room temperature.
ACCESSORIES:
- Do not place the system on a unsteady base that can be cause of damage to people or to the system, use it only with the trolley, rack, tripod or base recommended or supplied by Pro DG Systems following the installation indications. The system’s combination must be moved very carefully. The application of an excessive use of force and uneven floors can cause the combination of system and stand to tip over.
- Additional equipment: don’t use additional equipment which has not be recommended by Pro DG Systems. The use of not recommended equipment can cause accidents and damage to the system.
- To protect the system during bad weather or when left unattended for prolonged periods, the main plug should be disconnected. This prevents the system being damaged by lightning and power surges in the AC mains supply.
IT IS RECOMMENDED TO THE USER READ THESE INSTRUCTIONS BEFORE USING THE SYSTEM AND SAVE FOR
LATER USE.
PRO DG SYSTEMS IS NOT RESPONSIBLE OF AN INADEQUATE USE OF THE SYSTEM BY NO- AUTHORIZED PERSONNEL WITHOUT ENOUGH KNOWLEDGE OF USE.
THE USE OF THE PRO DG SYSTEMS PRODUCTS IS INDICATED FOR AUTHORIZED PROFESSIONALS THAT MUST TO HAVE ENOUGH KNOWLEDGE OF THE SYSTEM USE AND ALWAYS RESPECTING THE INDICATIONS SHOWED BELOW.
DESIGNED, ASSEMBLED AND OPTIMIZED IN SPAIN
Introduction
This manual has been designed to help all the users of the system i 803 from Pro DG Systems to its correct use as well as for the understanding of the benefits and versatility of the same. i 803 is a system totally designed, assembled and optimized in Spain.
I 803
Totally designed, assembled and optimized in Spain
Description
i 803 is a 2-way passive column-speaker equipped with eight (8) speakers of 2,75″ in a tuned enclosure. Its ultra-compact size and wide versatility makes it the perfect system for fixed installation and all type of point source applications where an unobtrusive visual impact is required.
Technical specifications
Power Handling: | 280 W RMS (EIA 426A Standard) / 560 W program / 1120 W peak. |
---|---|
Nominal Impendence: | 4 Ohm. |
Average Sensitivity: | 98 dB / 2.83V / 1m (average of 150-16.000Hz wideband). |
Calculated Maximum SPL: | / 1m 120 dB continuous / 123 dB program / 126 dB |
peak.
Frequency Range:| +/- 3 dB from 170 Hz to 18 Khz
Nominal Directivity:| 100º Horizontal.
Components:| Eight (8) speakers of 2,75”, 8 Ohm, 35 W.
Subwoofer partner Cut-off:| Together with subwoofer system IT 115 F: 25 Hz
Butterworth 24 filter – 170 Hz Lackwits-riley 24 filter.
Rigging Points:| 4 x M5
Connectors:| 2 NL4MP speak on connectors.
Acoustic Enclosure:| CNC model, 12mm made from birch plywood plated on the
exterior.
Finish:| Standard finish in black paint of high weather resistance.
Cabinet Dimensions:| (HxWxD) 740x130x125mm (29,13”x5,12”4,92”).
Weight:| 7 Kg (15,43 lbs.) net / 8 Kg (17,64 lbs.) with packaging.
Architectural specifications
Inside i 803.
I 803 incorporates eight Pro DG Systems speakers of 2,75”, 35 W (RMS). Specially designed under our own parameters for the best performance of the system.
KEY FEATURES
2,75” full-range compact ferrite loudspeaker 35 W (RMS)
Extended response and low distortion Paper cone and treated cloth surround
Steel basket Ideal for beam-steering application (columns), portable array and
compact applications
Specially designed under our own parameters for the best performance of the system.
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated Impedance
Minimum impedance
Power capacity
Program power
Sensitivity
Frequency range
Voice coil diameter
Bl factor Moving mass
Voice coil length
Air gap height| 70 mm (2,75 in)
8 Ω
6.5 Ω
35 W (RMS)
70 W
91 dB 1W / 1m @ ZN
160 – 20.000 Hz
20,3 mm (0.8 in)
4,9 N/A
0,0022 kg
10,5 mm
3 mm
---|---
**THIELE-SMALL PARAMETERS***
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, MS
Electrical Quality Factor, Qis
Total Quality Factor, Qtrs.
Equivalent Air Volume to CMS,
Vas Mechanical Compliance, CMS
Mechanical Resistance, Rams
Efficiency, η0
Effective Surface Area, SD
Maximum Displacement, Amax **
Displacement Volume, DVD
Voice Coil Inductance, Le @ 1 kHz
| 160 Hz
5.6 Ω
8
0,52
0,49
0679 l
430 μm / N
0,28 kg / s
0,5
0,003 m2
4.5 mm
13.5 cm3
0.25 MH
---|---
FREE AIR IMPEDANCE CURVE
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter: – Front mount
Depth
Net weight| 93.5 mm (3.68 in)
85 mm (3,35 in)
75.9 mm (2,98 in)
46 mm (1.81 in)
0.57 kg (1,25 lb.)
---|---
- T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working for a short period of time).
** The Amax is calculated as (Lyc – Hag)/2 + (Hag/3,5), where Lyc is the voice coil length and Hag is the air gap height.
OFF-AXIS FREQUENCY RESPONSE
FREQUENCY RESPONSE AND DISTORTION
Note: On axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber,1W @ 1m
Hardware for installation.
Threaded tube
Material: Steel, black powder coated, includes safety bolt. It allows stacking
one unit i 803 using a tripod or extensible bar.
Tube diameter: 36mm (1.42 in)
Dimensions: 120x40x40mm (4.72×1.57×1.57 in)
Tripod (OPTIONAL)
Material: Aluminum, black powder coated 5 steps (17 cm each step), includes
safety bolt.
Height: 125 cm to 195 cm (49.21” – 76.77”)
Max Load: 25 Kg (55.11 lbs.)
Tube diameter: 35mm (1.38 in)
Folded dimensions: 1040x120x120mm (40.94×4.72×4.72 in)
VERY IMPORTANT: a misuse of the components can be motive of cracking that
could compromise the safety of the system. Using damaged components could
cause serious mishaps.
Hardware for installation.
Extensible accessory with thread (OPTIONAL)
Material: Reinforced steel.
Color: Black.
Tube diameter: 35mm (1.38 in)
Height: 840mm – 1120mm (33.07” – 44.09”)
Distance rod with hand crank and »Ring Lock« system from König & Meyer
(OPTIONAL) Material: Reinforced steel with black paint coated.
Tube end(s): Ring Lock diameter 35-37 mm, threaded bolt M20
Height: 920mm – 1520mm / 36.22” – 59.84”
Weight: 3.86 Kg (8.51 lbs.)
Features: Hand crank with push-button system and locking screw. 2-piece
folding design.
Patented expanding mandrel system »Ring Lock«; vibration – free connect- ion
due to moveable plastic splints; push – button system and hand crank avoid
uncontrolled reverse motion; locking screw provides additional safety; M20
bolt for precise and vertical fit.
Mounting fork for two (2) units i 803 (OPTIONAL)
Material: Reinforced steel.
Mounting bolt: Diameter 35x120mm (1.38×4.72 in)
Width: Adjustable from 310 to 490mm (12.20 – 19.29 in)
Max Load: 2 x 32 Kg (2 x 70.55 lbs.)
Eyebolt for wall or ceiling installation (OPTIONAL)
Integration hardware to combine up to six units i 803 (OPTIONAL)
Wall mount bracket with steel mounting pole and adjustable angulation to support up to 32 Kg (70.55 lbs.) and with a length of 300mm (11.81 in) (OPTIONAL)
Advanced Sound Systems
www.prodgsystems.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>