PRO DG SYSTEMS GTA 2X8 2-Way Self Powered Line Array System User Manual
- June 10, 2024
- PRO DG SYSTEMS
Table of Contents
PRO DG SYSTEMS GTA 2X8 2-Way Self Powered Line Array System
Safety Indications
Please read it before use the system and keep for later use
PRO DG SYSTEMS® GIVES YOU THANKS FOR ACQUIRE THIS PROFESSIONAL SOUND SYSTEM FULLY DESIGNED, MANUFACTURED AND OPTIMIZED IN SPAIN, EXCLUSIVELY WITH EUROPEAN COMPONENTS AND WE WISH THAT YOU ENJOY WITH ITS HIGH QUALITY AND PERFORMANCE.
- This system has been designed, fabricated and optimized by Pro DG Systems® in perfect working order. To maintain this condition and ensure the right operation, the user must respect the following indications and advices of this manual.
- THE FIABILITY, SAFETY AND EFFICIENCY OF THE SYSTEM ARE ONLY AND EXCLUSIVELY GUARANTEED BY PRO DG SYSTEMS IF:
- Assembly, manipulation, re-adjustment and modifications or repairs are carried out by Pro DG Systems.
- The electrical installation complies with the requirements of IEC (ANSI).
- The system is used according to the use indications.
WARNING:
- If protectors are opened or sections of chassis are removed, except where this can be done manually, live parts can become exposed.
- Any adjustment, manipulation, optimization or reparation of the system must be done only and exclusively by Pro DG Systems. PRO DG SYSTEMS IS NOT RESPONSIBLE OF ANY DAMAGE OF THE SYSTEM CAUSED BY A MANIPULATION, ADJUSTMENT, OPTIMIZATION OR REPARATION REALIZED BY NO-AUTHORIZED PERSONAL BY PRO DG SYSTEMS
- High loudspeaker levels can cause hearing damage, it must avoid the direct contact with loudspeakers operating at high levels, otherwise it must use hearing protectors.
MAINS CONNECTION
- The system is designed for continuous operation.
- The set operating voltage must match the local mains supply voltage.
- The units has to be connected to the mains via the supplied power unit or power cable.
- Power unit: never use a damaged connection lead. Any type of damage must be fixed.
- Avoid connection to the mains supply in distributor boxes together with several other power consumers.
- The plug socket for the power supply must be positioned near the unit and must be easily accessible.
PLACE OF SITUATION:
- The system should stand only on a clean and totally horizontal surface.
- The system must not be exposed to any type of vibration during its operation.
- Avoid the contact with the water or wet surfaces. Do not place objects containing liquid on the system.
- Procure that the system has sufficient ventilation and do not block or cover any ventilation opening. Obstruct the ventilation may cause overheating in the system.
- Avoid the direct exposition with the sun and proximity with sources of heat or radiation.
- If the system undergoes an extreme change in temperature may affect its operation, before starting the system hope it has reached room temperature.
ACCESSORIES
- Do not place the system on a unsteady base that can be cause of damage to people or to the system, use it only with the trolley, rack, tripod or base recommended or supplied by Pro DG Systems following the installation indications. The system’s combination must be moved very carefully.
- The application of an excessive use of force and uneven floors can cause the combination of system and stand to tip over.
- Additional equipment: don’t use additional equipment wich has not be recommended by Pro DG Systems. The use of not recommended equipment can cause accidents and damage to the system.
- To protect the system during bad weather or when left unattended for prolonged periods, the main plug should be disconnected. This prevents the system being damaged by lightning and power surges in the AC mains supply.
- IT IS RECOMMENDED TO THE USER READ THESE INSTRUCTIONS BEFORE USING THE SYSTEM AND SAVE FOR LATER USE.
- PRO DG SYSTEMS IS NOT RESPONSIBLE OF AN INADEQUATE USE OF THE SYSTEM BY NO-AUTHORIZED PERSONNEL WITHOUT ENOUGH KNOWLEDGE OF USE.
- THE USE OF THE PRO DG SYSTEMS PRODUCTS IS INDICATED FOR AUTHORIZED PROFESSIONALS THAT MUST TO HAVE ENOUGH KNOWLEDGE OF THE SYSTEM USE AND ALWAYS RESPECTING THE INDICATIONS SHOWED BELOW.
INTRODUCTION
This manual is designed to help GTA 2X8 L.A. system users from Pro DG Systems, to the correct use and for the understanding of the benefits and versatilities of the same. GTA 2X8 L.A. is a line array system completely designed, manufactured and optimized in Europe (Spain}, exclusively with European components.
GTA 2X8 L.A.
100% designed-fabricated-optimized in Europe (Spain) only and exclusively
with European components.
DESCRIPTION
Self-powered line array system of 2-ways, equipped with two (2) speakers of
8″ in a tunning enclosure. The HF section has two (2) compression drivers of
1″ coupled to a wave guide. The transducer configuration generates a symmetric
and horizontal dispersion of 120 degrees without secondary lobes over the
entire frequency range. Ideal for main P.A. Frontfill, Sidefill and Downfill
both in outdoor events as well in permanent installation.
SPECIFICATIONS
ARCHITECTURAL SPECIFICATIONS
Inside the GTA 2X8 L.A. is composed by two (2) Beyma speakers of 8″, 300 W RMS. Specially designed under our own parameters for the best performance of the system.
KEY FEATURES
- Excellent power and performance
- Extended controlled displacement: Xmax ± 6 mm
- Extended mechanical displacement capability
- Designed with MMSS technology for high control, symmetry and linearity with ferrite magnet
- Demodulating ring for low harmonic distortion
- CONEX spider for higher resistance and consistency
- Waterproof carbon fiber loaded paper cone with Santoprene™ surround
TECHNICAL SPECIF/CATIONS
**THIELE-SMALL PARAMETERS***
Specially designed under our own parameters for the best performance of the system.
MOUNTING INFORMATION
The X max is calculated as; (Lvc-Ha)/ 2 +(Hag/ 3,5), where Lvc, is the voice coil length and Hag is the air gap eight.
INSIDE THE GTA 2XB L.A.
GTA 2X8 L.A. is also composed by one block which together with two (2) compression drivers, constitute the constant directivity horn, specifically designed to work with two (2) Pro DG Systems compression drivers of 50W RMS coupled to a waveguide.
The constant directivity characteristics of this model ensure the ability to cover 120° wide horizontally and 20° wide vertically at virtually any frequency within its operational range. To ensure freedom of resonance is constructed of aluminium with flat front finish to facilitate flush mounting.
KEY FEATURES
- Designed to be used with two Pro DG Systems compression drivers of 50 W RMS to a waveguide
- Provides uniform response
- Coverage of 120° in the horizontal plane and 20° in the vertical plane
- Precise directivity control in the pass band
- Aluminium construction with flat front to facilitate flush mounting
TECHNICAL SPECIFICATIONS
GTA 2X8 L.A. is also composed by two (2) Beyma compression drivers of 50 W
RMS, coupled to a waveguide. Specially designed under our own parameters for
the best performance of the system.
A combination of high-power neodymium compression driver with waveguide
provides the best junction for the best efficiency of GTA 2X8 L.A. Solving the
hard problem of achieving an optimum coupling between adjacent high-frequency
transducers. Instead of using expensive and troublesome wave-shaping devices,
a simple but effective waveguide transforms the circular aperture of the
compression driver into a rectangular surface, without undue angle aperture to
provide low curvature to the acoustic wavefront, arriving to fulfil the
necessary curvature requirement for the optimal acoustic coupling joint
between adjacent sources until 18 KHz. This is achieved, with the minimum
possible length for low distortion, but without being excessively short, which
would cause strong high-frequency interferences.
KEY FEATURES ( ONEUNIT)
- 4″ x 0.5″ rectangular exit
- Neodymium magnetic circuit for high efficiency.
- Effective acoustical coupling up to 18 kHz.
- True 105 dB sensitivity 1 w@ 1 m (averaged 1-7 kHz).
- Extended frequency range: 0.7 – 20 kHz.
- 1. 75″ voice coil with a power handling of 50 W RMS.
FREQUENCY DRIVERS & DISTORTION CURVES
Note: on axis frequency response measured with 2 waveguides coupled to a 90° X 5° horn in an anechoic chamber, 1 w@ 1 m.
FREE AIR IMPEDANCE CURVE
HORIZONTAL DISPERSION
Notes: dispersion measured with two waveguides coupled to a goo x 5° horn in
anechoic chamber, 1w@ 2m.
All angle measurements are from the axis ( 45° means + 45° ).
VERTICAL DISPERSION
Notes: dispersion measured with two waveguides coupled to a goo x 5° horn in anechoic chamber, 1w@ 2m. All angle measurements are from the axis ( 45° means
- 45° ).
TECHNICAL SPECIFICATIONS
MOUNTING INFORMATION
- Overall diameter: 80 mm. 3.15 in.
- Depth: 195 mm. 7.68 in.
- Mounting: Four 6 mm. diameter
- Net weight: (1 unit) holes 1.1 kg. 2.42 lb.
- Shipping weight (2 units): 2.6 kg. 5.72 lb.
DIMENSION DRAWINGS
Note: • Sensitivity was measured at 1 m distance, on axis, with 1 w Input, averaged in the range 1-7 KHz
CONSTRUCTION MATERIALS
- Waveguide: aluminum.
- Driver diaphragm: polyester.
- Driver voice coil: edge wound aluminum ribbon wire. Driver voice coil former: neodymium.
GT 1.2 H is a Class-D digital amplifier of last generation with 1400 W. It
includes digital processing with XLR input and output + USB and Ethernet
connectors.
Ideal for different configurations between systems and multiple applications.
TECHNICAL SPECIF/CATIONS
RIGGING HARDWARE
Rigging Hardware frame for GTA 2X8 L.A. composed by: one lightweight steel frame + 4 pinlock + one shackle to support a maximum weight of one ton and a half. Can elevate up a total number of 16 GTA 2X8 L.A.
Flight Hardware incorporated into the cabinet with different angulation
grades.
Stack mode for offer the maximum versatility and coverage.
IMPORTANT: a misuse of the frame and components can be motive of cracking that could compromise the safety of an array. Using a damaged frame and components could result in serious mishaps.
PREDICTION SOFTWARE AND INTEGRATION TOOLS
In Pro OG Systems we know that making good quality speakers is an important part of our job. Then, there is the other part that it is also fundamental in our job which is offering the warranty of using the speakers properly. Good tools make the difference to an optimal use of the system.
With the GTA 2X8 L.A. prediction software Ease Focus we can design different configurations between systems and simulate their behavior in different places and circumstances, like watching coverage, frequency, SPL and general systems behavior in an easy and comfortable way. It is easy to handle and we offer training courses for Pro OG Systems customers. For more information consult with our technical service at: info@prodgsystems.com
ACCESSORIES
Pro DG Systems offers to their customers all type of accessories for their systems. GTA 2X8 L.A. has F / Case for transport or Dolly Board and Covers for transport, plus complete cabling for the system ready to use.
Flight Case to transport four units of GTA 2X8 L.A. Fully dimensioned for an
hermetic packaging and ready for the road.
Dolly board and covers for transport four units of GTA 2X8 L.A. Perfectly
dimensioned to transport in any type of truck.
Entire cabling for the system available and ready for operation.
PRO DG SYSTEMS INTERNATIONAL
P.I. Santa Bárbara. C/ Aceituneros n°7 41580 Casariche (Sevilla). Spain
Phone:34 954 011 095
E-mail: info@prodgsystems.com ,
export@prodgsystems.com
Web: www.prodgsystems.com
An updated pdf version of this manual is always available at www.prodgsystems.com