PRO DG SYSTEMS Iris Series Configured Systems Instruction Manual
- June 10, 2024
- PRO DG SYSTEMS
Table of Contents
PRO DG SYSTEMS Iris Series Configured Systems
Iris Series
The new Iris Series from Pro DG Systems is the perfect column-type system
configuration for permanent installation, portable system and all type of
point source applications where an unobtrusive visual impact is required.
The new Iris Series is composed by the new models; i 803 (column) and IT-A 115
B (subwoofer), featuring state-of-the-art Class-D amplification and a very
intuitive processing for easy handling and absolute control, ready to plug in
and work.
The easy interaction of its different elements makes it a versatile modular
system, allowing it to be easily installed by a single person and scale it in
systems with a greater number of elements.
The ultra-compact design and reduced weight of its elements make it easy to
transport, which suppose great logistical savings.
The innovative versatility of Iris Series makes it the ideal system
configuration for one-person band, small bands, orchestras, corporate events,
as well as holding events in places of worship and leisure, offering the
possibility of creating different system configurations.
The main characteristics and technical specifications of i 803 and IT-A 115 B
as well as different configuration examples between them are specified below.
i 803
- Ultralight and compact. 360° rotatable
- 8 x 2.75″ full range woofer with neody- mium magnets
- Coupling hardware with angulation
- Extreme versatility for quick configurations
Coupling hardware with angulation available (optional), to combine several units i 803.
Extension bar to allow interaction between i 803 and IT-A 115 B.
Load capacity: 30 Kg (66.14 lbs)
“T” support for two units i 803. Load capacity: 30 Kg (66.14 lbs)
Wall mounting bracket with adjustable angulation.
Technical specifications
| Technical specifications | i 803 |
|---|---|
| Power Handling | 1120 W peak / 560 W program / 280 W RMS (EIA 426A |
Standard).
Nominal Impedance| 4 Ohm.
Average Sensitivity| 98 dB / 2.83V / 1m (average of 150-16.000Hz
wideband).
Maximum SPL Calculation| / 1m 121 dB continuous / 124 dB program / 127
dB peak.
Frequency Range| +/-3 dB between 170 Hz – 18 kHz.
Nominal Directivity| 100° horizontal.
Components| Eight (8) speakers of 2.75″, 35W, 8 Ohm with neodymium
magnet.
Amplifier| No / Passive, it is connected to SAT output of IT-A 115 B /
IT-A 118 B.
Rigging Points| 4 x M5.
Connectors| 2 NL4MP speakon.
Acoustic Enclosure| CNC fabrication in 12mm birch plywood.
Finish| Special textured black paint finish.
Grille / Hardware| 1.5 mm metal grille with 0.5 mm acoustic foam +
Integration cams for coupling several units in array
Dimensions| (H x W x D); 740x130x125mm (29,13”x5,12”4,92”).
Weight| 4,20 Kg (9,25 lbs) net / 4,80 Kg (10,58 lbs) with packaging.
IT-A 115 B
- Compact and lightweight design
- Extreme versatility for quick configurations
- 96kHz, 24 bit DSP processor with 3 factory presets. Speakon output for SAT.
- Last generation Class-D amplifier
Technical specifications
| IT-A 115 B
---|---
Power Handling| 2400 W peak / 1200 W program / 600 W RMS (EIA 426A
Standard).
Nominal Impedance| 8 Ohm.
Average Sensitivity| 99 dB / 2.83V / 1m (average of 50-1000Hz wideband).
Maximum SPL Calculation| / 1m 123 dB continuous / 126 dB program / 129
dB peak.
Frequency Range| +/-3 dB between 40 – 150 kHz.
Nominal Directivity| Omnidirectional.
Component| One (1) speaker of 15″ with ferrite magnet, 600 W, 8 Ohm.
Amplifier
| Last generation Class-D amplifier with 2 channels, 11000w for Low + 1600w
for SAT, with voltage selector. 96kHz, 24 bit DSP processor with 3 factory
presets. Speakon output for SAT.
Connectors| 1 XLR/combo channel with output for satellite + XLR Link.
Controls| On/off switch, volume level, Bluetooth on/off switch, TWS
switch, DSP management switch and LCD display for preset selection.
Power Supply| 110~220V 50/60HZ with voltage selector.
Acoustic Enclosure| CNC fabrication in 15mm birch plywood.
Finish| Special textured black paint finish.
Grille / Hardware| 1.5 mm metal grille with 0.5 mm acoustic foam + 1 m20
pole mount adapter + 2 handles with aluminum handgrip.
Dimensions| (H x W x D); 480x505x605mm (18,90”x19,88”x23,82”).
Weight| 22,8 Kg (50,26 lbs) net / 23.7 Kg (52,25 lbs) with packaging.
System configurations
Iris 1
Column-type system of 880 W RMS. Composed by:
1 unit i 803 + 1 unit IT-A 115 B
Iris 2
Column-type system of 1760 W RMS. Composed by:
2 units i 803 + 2 units IT-A 115 B
Perfect for one-person band, small bands, orchestras, as well as sound
reinforcement for multiple events and venues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>