PRO DG SYSTEMS i803 Iris Plus Series Configured System Instruction Manual
- June 10, 2024
- PRO DG SYSTEMS
Table of Contents
PRO DG SYSTEMS i803 Iris Plus Series Configured System
Iris Plus Series
The new Iris Plus Series from Pro DG Systems is the perfect column- type system configuration for permanent installation, portable system and all type of point source applications where an unobtrusive visual impact is required.
The new Iris Plus Series is composed by the new models; i 803 (column) and IT-A 118 B (subwoofer), featuring state-of-the-art Class-D amplification and a very intuitive processing for easy handling and absolute control, ready to plug in and work.
The easy interaction of its different elements makes it a versatile modular system, allowing it to be easily installed by a single person and scale it in systems with a greater number of elements.
The compact design and reduced weight of its elements make it easy to transport, which suppose great logistical savings.
The innovative versatility of Iris Plus Series makes it the ideal system configuration for one-person band, small bands, orchestras, corporate events, as well as holding events in places of worship and leisure, offering the possibility of creating different system configurations.
The main characteristics and technical specifications of i 803 and IT-A 118 B as well as different configuration examples between them are specified below.
PRODUCT OVERVIEWS
-
Ultralight and compact. 360° rotatable
-
8 x 2 . 75″ full range woofer with neodymium magnets
-
Coupling hardware with angulation
-
Extreme versatility for quick configurations
Coupling hardware with angulation available (optional), to combine several units i 803.
Extension bar to allow interaction between i 803 and IT-A 118 B.
Load capacity: 30 Kg (66.14 lbs)
T” support for two units i 803.
Load capacity: 30 Kg (66.14 lbs)
Wall mounting bracket with adjustable angulation.
Technical specifications
Technical specifications i 803
Power Handling| 1120 W peak / 560 W program / 280 W RMS (EIA 426A
Standard).
Nominal Impedance| 4 Ohm.
Average Sensitivity| 98 dB / 2.83V / 1m (average of 150-16.000Hz
wideband).
Maximum SPL Calculation| / 1m 121 dB continuous / 124 dB program / 127
dB peak.
Frequency Range| +/-3 dB between 170 Hz – 18 kHz.
Nominal Directivity| 100° horizontal.
Components| Eight (8) speakers of 2.75″, 35W, 8 Ohm with neodymium
magnet.
Amplifier| No / Passive, it is connected to SAT output of IT-A 115 B /
IT-A 118 B.
Rigging Points| 4 x M5.
Connectors| 2 NL4MP speakon.
Acoustic Enclosure| CNC fabrication in 12mm birch plywood.
Finish| Special textured black paint finish.
Grille / Hardware| 1.5 mm metal grille with 0.5 mm acoustic foam +
Integration cams for coupling several units in array
Dimensions| (H x W x D); 740x130x125mm (29,13”x5,12”4,92”).
Weight| 4,20 Kg (9,25 lbs) net / 4,80 Kg (10,58 lbs) with packaging.
IT-A 118 B
-
Compact and lightweight design
-
Extreme versatility for quick configurations
-
96kHz, 24 bit DSP processor with 3 factory presets. Speakon output for SAT.
-
Last generation Class-D amplifier
Technical specifications IT-A 118 B
Power Handling| 4000 W peak / 2000 W program / 1000 W RMS (EIA 426A
Standard).
Nominal Impedance| 8 Ohm.
Average Sensitivity| 99 dB / 2.83V / 1m (average of 50-1000Hz wideband).
Maximum SPL Calculation| / 1m 125 dB continuous / 128 dB program / 131
dB peak.
Frequency Range| +/-3 dB between 30 – 150 kHz.
Nominal Directivity| Omnidirectional.
Component| One (1) speaker of 18″ with ferrite magnet, 1000 W, 8 Ohm.
Amplifier
| Last generation Class-D amplifier with 2 channels, 11200w for Low + 1600w for SAT, with voltage selector. 96kHz, 24 bit DSP processor with
3 factory presets. Speakon output for SAT.
Connectors| 1 XLR/combo channel with output for satellite + XLR Link.
Controls| On/off switch, volume level, Bluetooth on/off switch, TWS
switch, DSP management switch and LCD display for preset selection.
Power Supply| 110~220V 50/60HZ with voltage selector.
Acoustic Enclosure| CNC fabrication in 18mm birch plywood.
Finish| Special textured black paint finish.
Grille / Hardware| 2 mm metal grille with 0.5 mm acoustic foam + 1 m20
pole mount adapter + 2 handles with aluminum handgrip.
Dimensions| (H x W x D); 520x715x605mm (20,47”x28,15”x23,82”)
Weight| 49,4 Kg (108,9 lbs) net / 50,9 Kg (112,21 lbs) with packaging.
System configurations
Iris Plus 1
Column-type system of 1280 W RMS. Composed by:
1 unit i 803 + 1 unit IT-A 118 B
Iris Plus 2
Column-type system of 2560 W RMS. Composed by:
2 units i 803 + 2 units IT-A 118 B
Ideal one-person band, small bands, orchestras, corporate events, as well as holding events in places of worship and leisure, offering the possibility of creating different system configurations.
system configurations
Documents / Resources
| PRO
DG SYSTEMS i803 Iris Plus Series Configured
System
[pdf] Instruction Manual
i 803, IT-A 118 B, i803 Iris Plus Series Configured System, Iris Plus Series
Configured System, Configured System
---|---
| PRO
DG SYSTEMS i803 Iris Plus Series Configured
System
[pdf] Owner's Manual
i 803, IT-A 118 B, i803 Iris Plus Series Configured System, Iris Plus Series
Configured System, Configured System
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>