atop RHG9628 Certified Layer3 Switch Instruction Manual

atop RHG9628 Certified Layer3 Switch

Product Information: RHG9628 Series

Featured Highlights

• High-density rack-mounted managed switch
• Flexibility to choose from six different core versions based on power supply, uplink port configurations, and embedded HardwareAssisted Boundary Clock feature
• Six different 4- or 8-Port modules available for customization
• Layer-3 routing support BGPv4, IPv4 static routing, RIP v1/v2, and OSPFv2
• IEEE1588v2 Hardware-PTP version received recognition for nanosecond-level accuracy
• Synchronous Ethernet embedded with full support for PTP profiles
• Can function as an Access/Aggregation switch with up to 4×1/10Gbps SFP slots and as a PTP boundary clock
• Up to 28 ports can be individually configured to run different instances of IEEE1588v2
• IEC61850-3 certified, Managed Modular Ethernet Switch with IEEE1588v2 Boundary Clock or IEEE1588v2 Transparent Clock
• 4-port Gigabit RJ45 or SFP High-Availability module available for zero packet loss on multiple ports
• Fully compliant with IEC62439-3 Clause 4-2016 (PRP) and IEC62439-3 Clause 5-2016 (HSR)

Product Usage Instructions

To use the RHG9628 series product, follow these instructions:

1. Select the appropriate core version based on your power supply, uplink port configurations, and embedded HardwareAssisted Boundary Clock feature requirements.
2. Choose the 4- or 8-Port modules that best fit your needs to customize your device.
3. If you need Layer-3 routing support, use BGPv4, IPv4 static routing, RIP v1/v2, or OSPFv2.
4. If you require high accuracy, use the IEEE1588v2 Hardware-PTP version.
5. If you need synchronous Ethernet embedded with full support for PTP profiles, use the RHG9628.
6. To function as an Access/Aggregation switch, use up to 4×1/10Gbps SFP slots and as a PTP boundary clock.
7. Configure up to 28 ports individually to run different instances of IEEE1588v2.
8. If you require zero packet loss on multiple ports, install a 4-port Gigabit RJ45 or SFP High-Availability module in any of the module slots in the RHG9628 CPU board.
9. If you need IEC61850-3 certification, use Managed Modular Ethernet Switch with IEEE1588v2 Boundary Clock or IEEE1588v2 Transparent Clock.
10. If you require full compliance with IEC62439-3 Clause 4-2016 (PRP) and IEC62439-3 Clause 5-2016 (HSR), use the RHG9628 series product.

For more information or technical support, please contact ATOP at +886-3-5508137 or [email protected].

FEATURED HIGHLIGHTS

• Supports HSR (IEC 62439-3 Clause 5) and PRP (IEC 62439-3 Clause 4)
• IEC 61850-3 and IEEE 1613 certification
• Integrated IEEE 1588v2 hardware-based BC and TC (-BC/SB version)
• Maximum 128Gbps switching capacity, 95.24Mpps throughput
• Rugged industrial design for harsh environments between -40°C to +85°C
• Flexible modular configuration, 3 Module-dedicated slots
• Up to 24 Gigabit ports, and 4×10 Gigabit SFP Uplink slots, 1PPS BNC
• ITU-T G.8032 ERPS Ring, RSTP, or MRP (Manager/ Client) redundancy
• Advanced management features such as QoS and VLAN

PRODUCT DESCRIPTION

Flexibility: ATOP’s high-density RHG9628 Rack-mounted managed switch provides the flexibility needed for your application demands. You can choose from among six different Core versions: based on power supply, uplink port configurations and embedded Hardware-Assisted Boundary Clock feature. And you can choose from six different 4- or 8-Port modules to customize your device in a very simple way.
Designed for Substations: Layer-3 routing support BGPv4, IPv4 static routing, RIP v1/v2 and OSPFv2.
Award-winning Performance: RHG9628’s IEEE1588v2 Hardware-PTP version received recognition for nanosecond-level accuracy, This makes RHG9628 one of the most reliable GMC backups. And being embedded with Synchronous Ethernet and with full support for PTP profiles.
High-availability, versatility and power: When equipped with High-Availability HSR/PRP modules, RHG9628 complies with the most stringent redundancy requirements, ensuring no packet loss and guaranteeing GOOSE packets arrive at their respective destinations. RHG9628‘s high performance provides a network redundant self-recovery mechanism of under 20ms on full load. This enables you to build a reliable network through almost any redundant ring topology. RHG9628 supports ITU-T G.8032 ERPS Ring, IEEE802.1D-2004 RSTP, STP, MSTP, MRP (Manager/ Client), iA-Ring, iA-Chain and many other compatible ring protocols for network redundancy. With a Multifunctional web dashboard, its offers intelligent features such as Quality of service (QoS), IGMP, port mirroring, and security.
It is available in two power input variants: one for low-DC voltage (redundant 24~120VDC input) and one for the more popular High-Voltage applications in the distribution grid (redundant 110~240VAC, 24~120VDC or 120~380VDC input). Additional 4 x 10 Gigabit uplink SFP slots allow RHG9628 to be the backbone of the substation.

BOUNDARY CLOCK APPLICATION

High accuracy delivered, even in holdover mode
A boundary clock, is normally a switch that doesn’t act transparently to the slaves in the network. Directly connected to the Grandmaster, large networks with thousands of slaves would overload the Grandmaster. So the need for a device that acts as a slave towards the master and as a master towards slaves is achieved with a boundary clock. ATOP’s RHG9628 Boundary clock, once synchronized, achieves the 50ns precision set forth in the ITU-T G.8271.1 recommendation. And it is equipped with a high-precision OCXO to guarantee that precision in the event of a link or device failure, with a maximum time- drift of 250ns from GNSS time. All this can guarantee a maximum 1.5us end-to- end time deviation budget from the GNSS to the end-application, up to 10 BC hierarchies.

Application Example
The network diagram shows the use of ATOP’s NTS7500 Grandmaster Clock and RHG9628 Boundary clock application.
RHG9628 can easily function as a both Access/Aggregation switch with up to 4×1/10Gbps SFP slots and as a PTP boundary clock. Up to 28 ports can be individually configured to run different instances of IEEE1588v2.
A wide variety of settings are allowed within profiles – such as the Power, and Enterprise profiles. RHG 9628-BS supports Synchronous Ethernet, allowing the transport of time and frequency, which is important for legacy networks such as SDH-SONET.

HIGH AVAILABILITY APPLICATION

Zero packet loss, on multiple ports
Install a 4-port Gigabit RJ45 or SFP High-Availability module in any of the module slots in RHG9628 CPU board, and you’re good to go. Congratulations: your network is now fully compliant with IEC62439-3 Clause 4- 2016 (PRP) and IEC62439-3 Clause 5-2016 (HSR). Simultaneously. Though this 4-port module.
Through HSR/PRP technology, ATOP’s device will replicate the packet through 2 redundant paths and the end-application will have the risks to lose a packet almost zeroed. This is an example of a mixed HSR/PRP network, where RHG9628 is used flexibly as a Transpar-ent or a Boundary Clock and as an HSR/PRP manager.

IEEE1588v2 PTP, IEC61850-9-3 Power Profile and HSR/PRP
RHG9628 is an advanced and flexible platform. It embeds high-bandwidth Switching fabric, Accurate hardware-based Boundary Clock or Transparent Clock, IEC61850-3 compliant hardware, and fully supports IEC/IEEE61850-9-3 – 2016 Power Profile. Also on HSR/PRP ports. When properly configured, our Switch can seamlessly provide Peer-to-Peer transparent clock and Boundary Clock on all ports, HSR/PRP ports included.

CONFIGURATION EXAMPLE

• RHG9628-410GSFP-SB-HV
  Main unit, with 4x 10 Gigabit SFP uplink slots,1PPS BNC, 120~370VDC, HW PTP BC/TC and SyncE

• RHG9X28-M1
  8-port Gigabit RJ45 module supporting IEEE1588v2 Hardware BC/TC.

• RHG9X28-M5
  4-port 10/100/1000Mbps RJ45 High-Avail. module, supporting HSR/PRP.

• RHG9X28-M2
  8-port Gigabit SFP module supporting IEEE1588v2 Hardware BC/TC.

IEC61850-3 certified Layer-3 Managed Switch, with 8 Gigabit ports, 4 10/100/1000 High-Availability HSR/PRP ports,
8 Gigabit SFP slots, one PPS output BNC (F) plug, and 4 x 10 Gigabit SFP uplinks, supporting IEEE1588v2 HW BC and Synchronous Ethernet.

DIMENSIONS & LAYOUT

SPECIFICATIONS

Switch core

Model Name| RHG9628
Switch Properties
Priority Queues VLAN Table
MAC-Based VLAN VLAN ID Range Trunk Group
Static IGMP Groups Dynamic IGMP Groups MAC Table Size Packet Buffer Size Jumbo Frame
Switching Fabric Capacity Maximum throughput| 8
512
512
VID 1 to 4094
8
128
256
16k
1.5 MB 9216 Byte 128 Gbps
95.24 Mpps
Ethernet
Standards| IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-T(X) IEEE 802.3u for 100BASE-FX IEEE 802.3ab for 1000BASE-T(X) IEEE 802.3z for 1000BASE-X
IEEE 802.3ae For 10 Gigabit Ethernet Fiber
IEEE 802.3x for Flow Control, backpressure control IEEE 802.1D-2004 for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service IEEE 8021X for Authentication
IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1Q VLAN.
IEEE 802.3ad for Port Trunk with LACP
IEC-62439-3 Clause 4 PRP (Parallel Redundancy Protocol) IEEE1588v2 PTP (Hardware-based) – (-SB version only) ITU-T G.8261 Synchronous Ethernet
Protocols| IPv4, IPv6, IGMPv1/v2/v3, GMRP, GVRP, SNMPv1/v2c/v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Server/Relay/Client, DHCP Option 66/67/82, BootP, TFTP, NTP Server/Client, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog,
MRP(Manager/ Client), ERPS, LLDP, IEEE 1588 PTP V2(Hw-based), 802.1x, RA-
DIUS, TACACS+, SyncE, HSR, PRP, ACL, DHCP Snooping, ARP Spoof Prevention, Dynamic ARP Inspection, MLD, UDLD, IP Source Guard, sFlow
Layer-3 Switching Protocols| Routing: static routing, RIP v1/v2, OSPFv2, BGPv4
Multicast: IGMPv1/v2/v3, DVMRP, PIM-DM, PIM-SM, PIM-SSM
Routing Redundancy: VRRP (Virtual Router Redundancy Protool)
Redundancy| IEC62439-3 Clause 5 High-Avail-Seamless-Redundancy(HSR) only RH- G9X28-M5/6
IEC62439-3 Clause 4 Parallel-Redundancy-Protocol (PRP) – only with RH- G9X28-M5/6
ITU-T G.8032 ERPS, STP, RSTP, MSTP, MRP, Compatible Ring/Chain, U-Ring
Automation Profiles| Modbus TCP
MIB| MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9
Precision timing
Time Synchronization| Network Time| NTP Server/Client, SNTP
Precision Time Protocol| ****

Std Version

| IEEE1588v1 BC (SW) IEEE1588v2 BC (SW)

IEEE1588v2 TC (HW)-ns accuracy

PTP (-SB) Version| IEEE1588v2 BC (HW)-ns accuracy IEEE1588v2 TC (HW)-ns accuracy Synchronous Ethernet
Holdover Accuracy| Boundary Clock/ SyncE (-SB)| <30 ns/s (IEEE61850-9-3 compliant)
PTP Mode (all versions)| Layer-2: Multicast, E2E/P2P, two-steps
Layer-3 (IPv4):Multicast,Unicast,Unicast Neg. (E2E/P2P)
Supported Profiles

(-SB version)

| C37.238 -2017 Power Profile
IEC/ IEEE61850-9-3 Power Profile(2016)
Additional Interfaces| RHG9528-410GSFP-BC/SB-XX support hardware-assisted BC/TC also on 4x1G or 4x10G SFP uplink slots.
1PPS square pulse issued from a 1PPS output BNC(F)
Power
Input Voltage| DC version: redundant 24~120 VDC AC version: redundant 110~240 VAC HV version: redundant 120~380 VDC
Input Current (Max)| 2.66A Max, 64W Max (For DC version models) 0.7A Max, 50/60Hz (For AC version models) 0.52A Max, 62W Max (For HVDC version models)
Power| < 70W (85°C).
Reverse polarity Protection| Yes
Relay Output| 1 Relay Output (24V/1A)
Connectors| AC: Barrier Terminal Block 4pin 9.52mm DC: Barrier Terminal Block 3Pin 13mm
Physical Characteristics|
Housing
Dimension (W x H x D) Weight
Installation| IP30 SPCC metal housing 440 x 44x 355 mm (not including screws, terminal blocks and rack-mount kit) 5Kg (not including module but module cover only) 1U Rack-mount, Rack-mount kit included
Environmental Limits
Operating Temperature Storage Temperature Ambient Relative Humidity| -40°C to +75°C (-40°F to +158°F)
-40°C to +85°C (-40°F to +185°F)
5% to 95%, 55°C (Non-condensing)
| | | |
Switch Modules

Technical Specifications
Description| 8-Port RJ45 module| 8-Port SFP module| 4-Port RJ45 with IRIG-B module| 4-port SFP with IRIG-B module
Model Name| RHG9X28-M1| RHG9X28-M2| RHG9X28-M3| RHG9X28-M4
Properties
Port speed| 10/100/1000 Mbps| 100/1000 Mbps| 10/100/1000 Mbps| 100/1000 Mbps
Interface| RJ45| SFP Slot| RJ45| SFP Slot
HW PTP IEEE1588v2| TC/BC (with -BC core) SyncE (with -SB core)| TC/BC (with -BC core) SyncE (with -SB core)| TC/BC (with -BC core) SyncE (with -SB core)| TC/BC (with -BC core) SyncE (with -SB core)
HSR/PRP| No| No| Yes, Terminal Block| Yes, Terminal Block
Dimensions| 102 x 120 x 42 mm| 102 x 120 x 42 mm| 102 x 120 x 42 mm| 102 x 120 x 42 mm
Weight| 550 g| 500 g| 550 g| 500 g
Fixing| 2 x quick-release screws (included)| 2 x quick-release screws (included)| 2 x quick-release screws (included)| 2 x quick-release screws (included)

Technical Specifications
Description| 4-Port RJ45 HSR/PRP module| 4-Port SFP HSR/PRP module
Model Name| RHG9X28-M5| RHG9X28-M6
Properties
Port speed| 10/100/1000 Mbps| 100/1000 Mbps
Interface| RJ45| SFP Slot
HW PTP IEEE1588v2| TC/BC (with -BC core)| TC/BC (with -BC core)
IRIG-B| 2 Groups| 2 Groups
Dimensions| 102 x 120 x 42 mm| 102 x 120 x 42 mm
Weight| 550 g| 500 g
Fixing| 2 x quick-release screws (included)| 2 x quick-release screws (included)

REGULATORY APPROVALS

Regulatory Approvals

Safety| UL/EN/IEC(CB) 60950/62368
EMC| FCC Part 15, Subpart B, Class A, EN 55032, EN 55024, EN 61000-6-4:2007+A1 2011, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2:2005
Power Automation| IEC61850-3, IEEE 1613
Test| Item| Value| Level
IEC 61000-4-2| ESD| Contact Discharge Air Discharge| ±8KV
±15KV| 4
4
IEC 61000-4-3| RS| Enclosure Port| 10(V/m), 80-1000MHz,
80% AM, 1~3GHz| 3
IEC 61000-4-4| EFT| AC Power Port DC Power Port Signal Port| ±4.0kV @2.5kHz
±4.0kV @2.5kHz
±2.0KV @2.5kHz| 4
4
4
IEC 61000-4-5| Surge| AC Power Port AC Power Port DC Power Port DC Power Port Signal Port| Line-to Line±2.0kV Line-to Earth±4.0kV Line-to Line±1.0kV Line-to Earth±2.0kV Line-to Earth±4.0kV| 4
4
3
3
4
IEC 61000-4-6| CS| AC Power Port DC Power Port Signal Port| 10V rms 0.15-80MHz, 80% AM
10V rms 0.15-80MHz, 80% AM
10V rms 0.15-80MHz, 80% AM| 3
3
3
IEC 61000-4-8| PFMF| (Enclosure)| 100A/m continuous, 1000A/m (3s)| 5
IEC 61000-4-10| Damped Osc. Magnetic Field| (Enclosure)| 100A/m, 100kHz, 1MHz| 5

IEC 61000-4-11

| ****

DIP

| ****

AC Power Port

| Drop 70% 3 times/s (1period)
Drop 40% 3 times/1ms (50 period)
Drop 100% 3 times/50m(5-50per.)| ****

–

IEC 61000-4-12

| Damped Oscillatory| AC Power Port Signal Port| 2.5kV common,1kV diff.mode 2.5kV common,1kV diff.mode| 3
3
Shock Drop Vibration| MIL-STD-810G Method 516.5
MIL-STD-810F Method 516.5
MIL-STD-810F Method 514.5 C-1 & C-2
RoHS2| Yes
MTBF| 20 years
Warranty| 5 years

ORDERING INFORMATION

Main core switch ordering information

Model name| Part Number| Description
RHG9628-410GSFP-DC| 1P1RHG96280004G| 410G, SFP, 2DC
RHG9628-410GSFP-AC| 1P1RHG96280006G| 410G, SFP, 2AC
RHG9628-410GSFP-HV| 1P1RHG96280005G| 410G, SFP, 2HV
RHG9628-410GSFP-SB-DC| 1P1RHG9628000GG| 410G, SFP, 2DC, Support HW-Boundary Clock/ SyncE
RHG9628-410GSFP-SB-AC| 1P1RHG9628000KG| 410G, SFP, 2AC, Support HW-Boundary Clock/ SyncE
RHG9628-410GSFP-SB-HV| 1P1RHG9628000IG| 410G, SFP, 2HV, Support HW-Boundary Clock/ SyncE
Modules ordering information

Model name| Part Number| Description
RHG9X28-M1| 1P1RHG9X28M101G| 8P1000TX RJ45 Module
RHG9X28-M2| 1P1RHG9X28M201G| 8P1000FX SFP Module
RHG9X28-M3| 1P1RHG9X28M301G| 4P, RJ45 Module and IRIG-B(TB)
RHG9X28-M4| 1P1RHG9X28M401G| 4P, SFP Module and IRIG-B(TB)
RHG9X28-M5| 1P1RHG9X28M501G| 4P, RJ45 Module with HSR/PRP
RHG9X28-M6| 1P1RHG9X28M601G| 4P, SFP Module with HSR/PRP
Optional Accessories

Model name| Part Number| Description
AC POWER CORD(US)| 50891741G| RHG9X28 US AC Power CORD, 183cm
AC POWER CORD(EU)| 50891751G| RHG9X28 EU AC Power CORD, 180cm
SDR-240-48| 50502401480001G| DIN RAIL POWER SUPPLY / T, AC 100~240V to 48V to 55V DC 5A, 240W
SDR-480-48| 50504801480001G| DIN RAIL POWER SUPPLY / T, AC 100~240V to 48V to 55V DC 10A, 480W
AXFD-1314-0523| 522AXFD1314001G| SFP Transceiver, 155Mbps, Multi-mode, 1310nm, 2km,
-40°C to +85°C, DDMI
AXFD-1314-0553| 522AXFD1314011G| SFP Transceiver, 155Mbps, Single-mode, 1310nm, 30km,
-40°C to +85°C, DDMI
AXGD-5854-0513| 522AXGD5854001G| SFP Transceiver, 1250Mbps, 850nm, Multi-mode, 550m, 3.3V,
-40°C to +85°C, DDMI
AXGD-1354-0523| 522AXGD1354001G| SFP Transceiver, 1250Mbps, 1310nm, Multi- mode, 2km, 3.3V,
-40°C to +85°C, DDMI
AXGD-1354-0533| 522AXGD1354011G| SFP Transceiver, 1250Mbps, 1310nm, Single- mode, 10km, 3.3V,
-40°C to +85°C, DDMI
AXGD-3354-0593| 522AXGD3354001G| SFP Transceiver, 1250Mbps, 1310nm, Single- mode, 40km, 3.3V,
-40°C to +85°C, DDMI
AXXE-5886-05B3| 522AXXE5886001G| SFP Transceiver, 10Gbps Multi, 850nm, 300m, -40°C to +85°C

• + 886-3-5508137
• + 886-3-5508131
• [email protected]
• www.atoponline.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>