PRO DG SYSTEMS i 601 A Pro Compact Battery Powered System User Manual
- June 10, 2024
- PRO DG SYSTEMS
Table of Contents
i 601 A Pro Compact Battery Powered System
User Manual
Precautions
Please read, keep and follow all safety and use instructions.
Important Safety Instructions.
- Heed all warnings.
- Do not overload the box to avoid damage to the speakers.
- Do not use this product near water. If the box is used outdoors, make sure that no humidity can enter the box.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or similar (including amplifiers).
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from this product.
- Only use attachments/accessories specified by the manufacturer.
- **** Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the product. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over.
- Unplug this product during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the product has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGS/CAUTIONS:
This symbol on the product means there is uninsulated, dangerous voltage
within the product enclosure that may present a risk of electrical shock.
This symbol on the product means there are important operating and maintenance
instructions in this guide.
This product contains magnetic material. Consult your doctor on whether this
might affectyour implantable medical device.
Contains small parts which may be a choking hazard. Not suitable for children
under age 3.
System Setup Connections and Controls
-
LCD Display: Mode switch button, pause button, single cycle button, fast forward and reverse switch button.
-
USB: Insert the USB into the card slot to play the stored music.
-
SD: Put it in the SD card slot and play the stored music.
-
MP3 Control: Adjust the volume of MP3.
-
Line Output: Use a XLR cable to connect the line-level output to the Channel 1 or 2 input of a second i 601 A to create a mono, two-loudspeaker setup.
Note: Line Out is post mix. -
Channel Input: Analog input for connecting microphone and instrument (XLR/6.35 jack) cables.
-
Select Button: Press the button to select your guitar or instrument.
-
Volume Control: Adjust the volume of your microphone, instrument or audio source.
-
Treble Control: Adjust the high-frequency balance of your microphone or instrument.
-
Bass Control: Adjust the low-frequency balance of your microphone or instrument.
-
Master Control: Adjust the overall output level of the speaker system.
-
Power Cord Connector: Connect the power cord to start setting the volume and playing music.
-
Power/Signal/Clip Indicator: Displays the input signal status in color.
Green: Power on
Yellow: Signal present
Red: Signal clipping
Note: Reduce the corresponding volume control to prevent signal clipping. -
Power Supply: The main power switch.
Optional accessories
Wall Mount bracket for i 601 A.
Tripod stand for i 601 A.
Technical Specifications | i 601 A |
---|---|
Power Handling | 320 W peak / 160 W program / 80 W RMS |
Nominal Impedance | 4 Ohm |
Average Sensitivity | 95dB / 2.83V / 1m (average of 80-16.000 Hz wideband) |
Maximum SPL (1m, free space) | 105 dB |
Frequency Range | +/-3 between 60 Hz – 18 kHz |
Nominal Directivity | 120ºof horizontal coverage, 90ºof vertical coverage |
Low / Mid Frequency Driver | One (1) coaxial speaker of 6.5” |
High Frequency Driver | 0.8″ dome tweeter |
Amplifier | Last generation Class-D amplifier |
Rigging Points | 2 x M8 |
Connectors | 2 XLR / Jack input channels with mic and line switch + XLR Link |
Controls | 3 Mixer Channels and 2 Mic Preamps, 2-Band Channel EQ, Bluetooth & |
TWS function, USB into the card slot to play the stored music.
Power Supply| 110~240V 50/60HZ
Battery| Rechargeable Lithium-ion battery 1300mAh. Up to 4 hours of use in
normal volume
Acoustic Enclosure| Reinforced polypropylene plastic
Finish| Special paint finish in black
Grille| 0.8mm thickness metal grille with 3mm acoustic foam
Mounting Options| 35mm pole mount, Tilt-back (30ºangle), Floor Monitor
(45ºangle), Wall or ceiling mount with bracket
Cabinet Dimensions| (HxWxD); 235x250x290mm (9.25”x9.84”x11.42”)
Weight| 7.25 Kg (15.98 lbs) net / 8 Kg (17.64 lbs) with packaging
Documents / Resources
| PRO
DG SYSTEMS i 601 A Pro Compact Battery Powered
System
[pdf] User Manual
i 601 A, i 601 A Pro Compact Battery Powered System, Pro Compact Battery
Powered System, Compact Battery Powered System, Battery Powered System,
Powered System
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>