Roth Minishunt Wireless Receiver Installation Guide
- June 10, 2024
- Roth
Table of Contents
Minishunt Wireless Receiver
Installation Guide Living full of energy
Roth wireless receiver
WARNING
Risk of fatal electric shock from touching live connections. Before working on
the controller always switch off the 230V power supply and prevent it from
being accidentally switched on.
Must be mounted on a flat surface, screws max. Ø 3 mm.
Roth underfloor heating system
A. Connect to 230V power, Controller is ready for pairing of sensor. Please
see thermostat/sensor operation manual.
B. 230V pump output, max. load 0,5 A. Connect “brown” to L and “blue” to N.
Cables must be secured.
C. Actuator. Connect “brown” to L and “blue” to N. Cables must be secured. Use
Roth Project actuators 230V 1 Watt, HVAC no. 7466275430
Glass fuse WT 6.3 A (5 x 20
mm). Turn off 230V power before replacing.
Connect to 230V power, Controller is ready for pairing of sensor.
Please see thermostat/sensor operation manual.
In the event of a power failure, the connection between the room thermostat
and the receiver is restored within 5-10 minutes.
Roth Minishunt QR
ROTH UK Ltd
1a Berkeley Business Park
Wainwright Road
Worcester WR4 9FA
Phone +44 (0) 1905 453424
E-Mail [email protected]
[email protected]
[email protected]
[email protected]
roth-uk.com
References
- borger.dk - din indgang til det offentlige
- Frontpage | Norge.no
- Hej! Welcome to sweden.se – the official website of Sweden
- UK.COM