VEVOR DGN10X122110V74RVV1 Dual Display Heat Press Machine Instructions

VEVOR DGN10X122110V74RVV1 Dual Display Heat Press Machine

Warning

1. Please make sure that there is always someone around the machine while it is working to avoid any danger.
2. Do not touch the heating plate when the machine is working to prevent it from getting burnt. Touching the machine when it is overheated may hurt you. Please use the handle on it.
3. Do not let children and the disabled use this machine. Youngsters and elders can only use it when an adult is around.
4. To prevent electricity leakage, don’t immerse the machine in water with any detergent, especially the controller box.
5. Please unplug the machine after using it to prevent it from heating for a long time.

Caution

1. Read the instructions carefully before using.
2. Check the temperature measurement of your machine whether it is Celsius or Fahrenheit.
3. Make sure that the power and voltage are consistent.
4. Plug the controller box into the socket tightly while using
5. Do Not cross wires with this machine as it can result in harm from electric shock
6. Do Not add electric appliances to the original line without permission.
7. Don’t touch or wipe the machine with a wet hand or cloth.
8. You are able to adjust time and temperature of the machine. The actual temperatures vary in 5 to – 10℃ according to materials. To achieve good pressing, you need to set the right time and temperature.
9. Make sure the heat transfer paper is not reversed.

Dear Customer,
We appreciate you choosing our multi-functional heat press machine. Our patented heat press machine with slide rails is one of the most outstanding ones in the world.
Controlled by a microprocessor and designed with a touch control panel, our heat press machine features high accuracy and easy operation. Slide rails make component replacement simpler. Advanced design and technologies offer convenience for upgrade and after-sales service.

Features

1. Revolutionary slide rails make component replacement easier.
2. Auto timer & alarm clock
3. Digital dual displays are controlled by microprocessor, which brings higher accuracy.
4. Stable power offers intensive protection for circuit board
5. The latest thermocouple is safer and sturdier.
6. Thickened aluminum board brings better heating effect. Superior quality is guaranteed.
7. 360° swivel design for easy transport.
8. The base can withstand up to 752°F without deformation if equipped with a heat-resistant silicone rubber foam mat.

All Parts

• Heat Press Machine
• Mug Press Machine
• Mug Press（12*23.5cm）( 11oz )
• Hat/Cap press：5.5″x 3″ （14*8cm）
• Plate Press #1 5″(12.5cm) in diameter (max)
• Plate Press #2 6″ (15.5cm) in diameter (max)
• Mug Press 12*19cm
• Mug Press 12OZ
• Mug Press 17OZ

Specifications

 |  |  |
---|---|---|---
Heating Plate Size| 2938CM /1000W| 3838CM/1000W| 2030CM /600W
Package Size| 46.55042.5CM| 5548.542.5CM| 5147.5*44.5CM
Voltage| 110v / 220v
Temperature Range| (0 – 250℃)/ (0-482℉)
Timer| 0 – 999 S

Description

Operation Instruction

Controller

• OUT: Heating
• WORK: Countdown
• SET: Function setting
• ▲: Increase
• ▼: Decrease & (count down manually)
• Upper display screen: temperature
• Lower display screen: countdown

Setting

Temperature setting:

Press the “SET” button, and you will see “SP” on the upper screen and the temperature value on the lower screen. Press ▲  ▼ to increase or decrease the temperature.
Time setting Double press the “SET” button, and you will see “S” on the upper screen and time on the lower screen. Press ▲ or ▼ to increase or decrease time. Celsius/ Fahrenheit conversion Press the “SET” button 3 times, and you will see “C-F” on the upper screen and the temperature unit on the lower screen. Press ▲ or ▼ convert between Celsius and Fahrenheit.
Start the countdown Press ▼ on the interface shown in the picture to start the countdown. Notes:

1. Temperature and time will vary for different materials with different thicknesses.
2. Please try a small sample to get the right temperature and time before printing in large quantities.
3. Clothing requires a temperature of about 180°C/356°F. Sublimation paper for fabric clothing use: 30-50 sec. Transfer paper for 100% cotton clothing use: 15-20sec.

Assembly Process

Thank you for purchasing our product. It is a multi-purpose heat press machine that can be applied on T-shirts, caps, china, or mugs. However, it does require different attachments to be compatible with different tasks.

1. T-shirt Attachment Installation The machine is set to T-shirt mode by default. The default temperature is 356°F, and the timer is set to 30 seconds.
2. Ceramic Plate Installation Remove the screws on the heating plate, insert the ceramic plate, and secure it to finish the assembly.
3. Cap/ Hat Installation Attachment The whole attachment is easy to slide in/out. After taking out the previous attachment, insert the attachment for caps/hats and slide it in. Secure it with screws.
4. Cups and Cylindrical Objects Installation Attachment This particular attachment requires no installation. It can be used directly after plugged into a power source. If you want to replace the cup, untighten the clamp and replace the cup.

Tips for adjusting the clamp:
Turn the knob counterclockwise to loosen the clamp. Turn the knob clockwise to tighten the clamp.

• Step 1: Wrap the transfer paper tightly around the cup/mug. It is advisable to use heat-resistant tape.
• Step 2: Put the cup/mug and the transfer paper into the heat press machine.
• Step 3: Set the appropriate temperature. Please remember to wear heat-resistant gloves!

Reminder:
To print and make DIY products, it is also necessary to prepare the following equipment and materials.

1. Inkjet printer/ six color printer (For example Epson R-230 / R270 / R290 / T50)
2. CISS (Continuous ink supply system) Different models of inkjet printers will need different CISS.
3. Sublimation ink / Heat transfer ink;
4. Heat-resistant tape;
5. Sublimation paper / Heat transfer paper (for ceramic and fabric)
6. Paper cutter
7. For mug/cup and plate press: normal mug and plate cannot be used for press. Only a sublimation mug and plate can be used.

Temperature and Time Setting for Common Products

No

.

| Product Name| Recommende d

Temperature

| Recommende d Time| Notes
---|---|---|---|---
1| Cup/Mug| 180-200°C| 30s| 1.      Use heat transfer paper. Print the image in reverse format (mirror image).

2.      Apply medium pressure. Make sure the cup/mug is tightly wrapped by the transfer paper.

Adjust the position.

330-380°F
2| Plate| 180-200°C| 30s| 1.      Use heat transfer paper. Print the image in reverse format (mirror image).

2.      Try to place the plate in a level position.

3.      Do not apply too much pressure. Apply the amount of pressure

enough to secure the plate.

330-380°F
3| Cap/Hat| 180-190°C| 40s| 1.      Use heat transfer paper. Print the image in reverse format (mirror image).

2.      Try to place the cap/hat in a level position.

3.      Use medium pressure.

330-350°F
4| Cotton Clothing| 160-180°C| 30s| 1.      Use AW light heat transfer paper (with red grids on the back). Print the image in reverse format (mirror image).

2.      Make sure parts that are not heat-resistant (such as plastic

buttons) do not touch the heating board.

3.      Print with high pressure.

4.      Peel off the transfer paper immediately after printing (or otherwise it will stick to the cloth after cooling and damage the image).

5.      This is suitable for light cotton

clothing.

320-360°F
5| Linen Fabric| 160-180°C| 30s| 1．Use heat transfer paper. Print the image in reverse format (mirror
320-360°F
 |  |  |  | image).

2.       Make sure parts that are not heat-resistant (such as plastic

buttons) do not touch the heating board.

3.       Print with high pressure.

---|---|---|---|---
6| Chemical Fiber Fabric| 150-160°C| 20s| 1.      Use heat transfer paper. Print the image in reverse format (mirror image).

2.      Make sure parts that are not heat-resistant (such as plastic

buttons) do not touch the heating board.

3.      Print with medium pressure.

300-320°F
7| Pillows and White

Non-cotton Clothing

| 190°C| 50s| 1.      Use heat transfer paper. Print the image in reverse format (mirror image).

2.      Make sure parts that are not heat-resistant (such as plastic

buttons) do not touch the heating board.

3.      Print with high pressure.

340°F

Troubleshooting

too high

| Adjust time or temperature
2| Failure to heat up despite

normal display on the screen

| The heating plate or the relay is

broken

| Check the heating plate or

the relay

3| Faded images that lack color| Insufficient temperature and/or time| Adjust the temperature

and/or increase the heating time

4| Blurry images with darkened

colors

| Time too long and temperature

too high

| Adjust the temperature and

the heating time

5| No action after the power is turned on| Poor connection between the plug and the socket or fuse is

blown

| Check the plug and the fuse
6| The actual temperature passes

the set temperature

| The relay is broken| Replace The relay

Contact us

Thanks for your purchase. If you have any questions, please don’t hesitate to contact us.
We’ll try our best to resolve your issues ASAP.
Should you have any concerns, please contact us by emailing help@cs- supportpro.com.

References

• Transparent outsourced web hosting tech support |SupportPRO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>