babymoov A014304 Handy Care Zero Emission Audio Monitor Instruction Manual

June 10, 2024
babymoov

babymoov A014304 Handy Care Zero Emission Audio Monitor

Product Information

The Handy Care baby monitor is a product designed and engineered by Babymoov in France. It is a standard baby monitor that comes with a transmitter, receiver, jack cables, and a lithium 3.7V – 750 mAh rechargeable battery installed in the receiver. The product has the main functions of transmitting audio signals from the transmitter to the receiver and alerting the user when the batteries need changing or recharging. The product is not a medical device and should be used with caution.

Product Usage Instructions

  1. Ensure that both the transmitter and receiver are properly connected and turned on.
  2. Place the transmitter in the baby’s room and keep the receiver with you.
  3. Adjust the volume on the receiver to your desired level.
  4. Test the product before use to ensure that it is functioning correctly.
  5. If you notice any defects or problems, contact the consumer department for assistance.
  6. To troubleshoot any issues, refer to the troubleshooting guide in the user manual.
  7. When not in use, turn off both the transmitter and receiver to conserve battery life.

Thank you for choosing our Handy Care baby monitor. Please read these instructions carefully to learn how to use your appliance properly and guarantee long-lasting use. If you notice a defect or any problem whatsoever, please contact our consumer department.

MAIN FUNCTIONS

  • 500 m range in a free field, in an environment free from any source of waves or interference and without obstacles.
  • FHSS technology operates on a frequency of 2.4 Ghz.
  • Automatic hop and search for a free channel.
  • The audible and visual alarm on the receiver.
  • Volume control on the receiver.
  • Microphone sensitivity can be adjusted on the transmitter.
  • Soft night light on the transmitter with adjustable intensity.
  • Battery condition indicated on both the transmitter and receiver and alarm when batteries need changing or recharging.

WARNING

  • The Baby monitor Handy Care should not be seen as a medical device. In addition to using Baby Monitor Handy Care, it is strongly recommended that an adult checks on your baby directly, on a regular basis. Premature babies or children considered to be at risk should be monitored by your pediatrician or a health professional.
  • Never go away from your baby outside the house, even for a short moment.
  • Non-rechargeable batteries are not to be recharged.
  • Rechargeable batteries are to be removed from the device before being charged with a dedicated charger (not included).
  • Connecting the unit to the power supply does not charge rechargeable batteries.
  • Different types of batteries: new and used batteries, or rechargeable and not rechargeable batteries, are not to be mixed.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Batteries are to be inserted with the correct polarity (+/-).
  • Exhausted batteries are to be removed from the device.
  • The supply terminals are not to be short-circuited.
  • Always use the supplied battery for the receiver: if the battery is damaged it must be replaced by the manufacturer, the after-sales service, or people with similar qualifications, in order to avoid any risk.
  • For the best performance of your baby phone, and to reduce any interference, we recommend you do not plug any other electrical appliance into the same socket as your baby phone (do not use multiple socket outlets).
  • Dismantling the product invalidates the guarantee.
  • This product must not be left within the reach of children.

PRECAUTIONS

  • Always use a 5 V – 1000 mA plug.
  • When the Handy Care Baby Monitor is not in use for an extended period, remove all the batteries from the transmitter and the battery from the receiver to avoid any damage associated with a battery leak.
  • The baby monitor is best performed within a temperature range of – 9 °C to + 50 °C.
  • Do not leave the monitor expose to strong sunlight for a long time or nearby any heat source, moisture, and excessive dusty environment.
  • Do not open the cabinet, no serviceable part inside.
  • Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with unsorted household waste, but dispose of it at a selective collection point.
  • Within the European Union, this symbol indicates that this product can not be thrown in the garbage or together with household waste, but should be disposed of using the appropriate separate waste collection.
  • Note: dropping or striking the product, or using it in any way that does not comply with the manufacturer’s recommendations, may damage it and invalidate the guarantee.

STANDARD ACCESSORIES

  • a. Transmitter
  • b. Receiver
  • c. Jack cables x 2
  • d. Lithium 3.7V – 750 mAh rechargeable battery (installed in the receiver)
  • e. User manual

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-1

TROUBLESHOOTING GUIDE

Problem Causes possibles Solution
No sound on the receiver • The microphone’s sensitivity is too low.

• The receiver volume is too low.

• The power adapter is not properly connected.

• SLEEP technology activated.

• The batteries are empty.

| • Increase the microphone sensitivity.

• Increase the receiver volume.

• Check the connection.

• Press a button to activate the receiver.

• Charge your receiver or replace the batteries in the transmitter or plug the units into the mains.

Transmission always on| • The sensitivity of the «SLEEP» technology is too high.

• CONTINUOUS mode is activated.

| • Reduce the sensitivity of the SLEEP mode (2).

• Activate SLEEP technology using the button (5).

The audible alarm is permanently activated| • Transmitter battery is run down.


• Distance between baby and parent unit exceeds the operating range.

| • Replace the batteries in the transmitter or plug the transmitter into the mains.

• Move the receiver & the transmitter closer together.

Always showing low battery alert| • Battery has run down.


• The battery is damaged or empty.

| • Replace with a new battery or use an AC adapter (transmitter).

• Recharge the battery using an AC adapter (receiver).

• Replace with a new battery pack.

Battery life is short| • Night light is permanently switched on.

• CONTINUOUS mode is activated.

| • Turn off the night light or adjust the SLEEP mode.
Communication is frequently interrupted or off| • The transmitter and/or receiver are located near other electrical appliances.

• Using the baby phone on a power strip.

• The two appliances are separated by metal structures, thick walls, floors, etc.

• Baby unit battery has run down.

| • Move the transmitter and/or receiver away from sources of interference or reset the pairing.

• Do not connect your baby monitors to power strips.

• Re-locate the transmitter or receiver.


• Replace with a new battery or use an AC adapter.

The transmitter range is too short| • The two appliances are separated by metal structures, thick walls, floors, etc.

• Baby unit battery has run down.

| • Re-locate the baby or parent unit.


• Replace with a new battery or use an AC adapter.

  • Frequency: 2.4 gHz
  • Maximum output power: 19 dBm
  • Battery: Li-Ion Battery Polymer 3.7 V / 750 mAh

Transmitter Receiver

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-2 babymoov-A014304-Handy-Care-
Zero-Emission-Audio-Monitor-fig-3

  1. ON/OFF and pairing button
  2. 3. Microphone sensitivity down adjustment button
  3. Night Light intensity adjustment button
  4. SLEEP Technology
  5. Night Light
  6. Power on LED
  7. SLEEP technology icon
  8. Power Jack port
  9. ON/OFF and pairing button
  10. Volume down button
  11. Volume up button
  12. Microphone
  13. Night Light
  14. SLEEP technology icon
  15. Speaker mute icon
  16. Night Light icon
  17. Sound detection icons
  18. Power on / battery charging LED
  19. Power Jack port

SETTING UP THE APPLIANCE

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-4

Place the transmitter out of the child’s reach, on a flat surface between 1 m and 2.50 m from the baby’s head. Point the transmitter microphone towards the baby.

POWER SUPPLY

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-5

  1. Operation from batteries (3 x AAA 1.5 V not included). N.B.: the range is longer when the transmitter is running on a power outlet.
  2. Mains operated with jack cable (** plug not supplied).
  3. LED is red + beep = low battery. The unit turns off after 30 minutes.

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-6

  1. Operation from the lithium battery pack.
  2. Charges with jack cables (** plug not supplied). Before the first use, charge the Lithium-Polymer battery for at least 3 hours. It is recommended to turn off the device during the first charge.
  3. Yellow LED flashes = battery charging. The yellow LED on = charging OK. LED is red + beep = low battery. The unit turns off after 30 minutes.

KOPPLUNG – PAIRING

PAIRING = connection between the transmitter and receiver

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-7 babymoov-A014304-Handy-Care-
Zero-Emission-Audio-Monitor-fig-8

RECEIVER VOLUME

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-9

MICROPHONE

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-10

NIGHT LIGHT

The night light can be activated on both units.

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-11

Adjusting the brightness of the night light.

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-12

SLEEP TECHNOLOGY

The advanced «SLEEP» technology ensures no waves are emitted by the receiver and transmitter whilst the baby sleeps.
Note: before activating the «SLEEP» function, check that the receiver and transmitter are properly plugged in and charging.

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-14

Adjusting the sensitivity of the «SLEEP» function

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-15

CONTINUOUS MODE

The receiver and transmitter communicate continuously.

babymoov-A014304-Handy-Care-Zero-Emission-Audio-Monitor-
fig-16

EU DECLARATION OF CONFORMITY

This declaration of conformity is used under the sole responsibility of the manufacturer. Babymoov Group  Parc Industriel des Gravanches – 16, rue Jacqueline Auriol 63051 Clermont Ferrand Cedex 2 – France The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU.
Declares that the following product: ∙ model: Handy Care ∙ reference: A014304 is compliant with the following relative harmonized standards:

  • EMC: EN 55032:2015/A11:2020
  • EN 55035:2017+A11:2020
  • EN IEC 61000-3-2:2019
  • EN IEC 61000-3-3:2013/A1:2019
  • Radio: EN 301 489-1 V2.2.3(2019-11)
  • EN 301 489-3 V2.2.0(2021-11)
  • EN 300 400 V2.2.1(2018-07)
  • Health: EN 62479:2010
  • EN 50663:2017
  • Safety: EN 62368-1:2014+A11:20177
    Name: M. Pierre Magro

Warranty

Lifetime warranty. Register within 2 months. See conditions at babymoov.co.uk.

Babymoov UK Ltd 3rd Floor, East Reach House East Reach Taunton – TA1 3EN – England  www.babymoov.co.uk.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals