Roth Minishunt Plus Wireless Room Thermostat Installation Guide
- June 10, 2024
- Roth
Table of Contents
Roth Minishunt Plus Wireless Room Thermostat
INSTALLATION
Roth wireless room thermostat
- Remove screw and slide backplate off.
- Insert batteries (included), be aware of +/- polarity.
- Mount backplate on the wall (screws not incl.) thermostat slides onto back plate.
Pairing/registering the thermostat. All connections must be made to the Controller (pump, actuator before start-up. Please see controller manual for details. Press the registration button on the left side of the control unit (see picture 5) and then press the registration button on the room thermostat (see picture 6). The temperature is now shown in the display.
Attention : Do not press the buttons on the front of the thermostat whilst pus. hing the pairing button on the rear (see picture 6).
- Once the thermostat is connected to the Zone/Channel, the display shows the temperature on the thermostat.
- In the event of a power failure, the connection between the room thermostat and the receiver is restored within 5-10 minutes.
Operation of thermostat. In order to enter MENU, press and hold + and –
button. Use +/- to navigate between MENU settings.
Roth Minishunt Plus OR
CONTACT
ROTH UK Ltd
- Address: 1a Berkeley Business Park Wainwright Road Worcester WR4 9FA
- Phone +44 (0) 1905 453424
- E-Mail enquiries@roth-uk.com
- technical@roth-uk.com
- orders@roth-uk.com
- accounts@roth-uk.com
- roth-uk.com
ROTH FINLAND OY
- Address: Raaseporintie 9 (Talo 2) 10600 Tammisaari
- Puh. +358 (0)19 440 330
- S-posti: service@roth-finland.fi
- roth-finland.fi
- facebook.com/RothFinland
References
- borger.dk - din indgang til det offentlige
- thisisFINLAND
- Frontpage | Norge.no
- Roth Finland
- Roth Norge
- Roth Sverige
- Roth UK
- Hej! Welcome to sweden.se – the official website of Sweden
- UK.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>