ATEN CCKM KVM over IP Matrix Manager User Guide
- June 10, 2024
- Aten
Table of Contents
CCKM KVM over IP Matrix Manager
User Guide
CCKM
KVM over IP Matrix Manager
Quick Start Guide
© Copyright 2022 ATEN® International Co. Ltd.
CCKM KVM over IP Matrix Manager
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Released: 04/2022
A .Download
B .
License Activation
C. Adding KE & KX Series Devices 
Package Contents
1 CCKM USB License Key (inapplicable to Virtual License)
1 user instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support www.aten.com/support
Scan for more information
|
---|---
http://www.aten.com/products/productItem.php?model_no=cckm|
http://www.aten.com/ext_libraries/manuals.php?n=cckm
Installation
To install the CCKM, do the following:
-
On ATEN website’s Download section, search for CCKM and click Download the latest version under Software & Drivers. Then log in (by Create New or Log In).
-
Click Insert under Product Registration and fi ll in the necessary information to register the KE & KX Series device(s) you have purchased. A
-
After registration, click Trial Software Download A , download and unzip the version of the CCKM software based on your OS system.
-
Insert the CCKM USB License Key purchased. If you’re using the Virtual License, skip this step, and see License Activation after the installation is complete.
-
Execute the installation file and follow the onscreen instructions to install.
Note: In the License Agreement screen, thoroughly read through the details of the software license agreement before proceeding. -
When the installation is complete, the Installation Complete message appears.
-
Run the CCKM.
License Activation
Without a license, the CCKM can only configure up to 8 KE Series devices. To activate the CCKM Virtual License Key, do the following:
- Log into the CCKM web interface (https://
:8443), and click System Settings. - From the General tab, click Click to Upgrade to browse for and activate your purchased license. B
- Once upgraded, you can configure more than 8 KE & KX Series devices to be managed by the CCKM over a network.
Adding KE & KX Series Devices
Before you start, make sure:
- KE & KX Series devices are installed within the same LAN
- Only pair KE transmitter to KE receiver or KX transmitter to KX receiver because KE & KX Series devices are not compatible.
-
On the CCKM main page, click the Install Wizard button. C
-
Select Search Local or Search Subnet and enter a subnet IP, to respectively search for KE & KX Transmitters / Receivers on the local network or for their subnet. Click the Refresh button to start searching. C
-
Under the total numbers of transmitters and receivers found, check the devices you want to add, and click Next.
-
Optionally reassign the IP addresses of the KE & KX Series devices and/or rename them, then click Next.
-
Confirm the settings and access permissions of the transmitters, and likewise for receivers, then click Done.
Note: For details on Transmitter/Receiver Permissions, please refer to the KE & KX Series & CCKM User Manual. -
Once successfully added, you will be able to view and monitor the statuses of the KE & KX Series devices on the CCKM main page.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>