STEELCRAFT 4000 Hospital Beds Instruction Manual

July 23, 2024
Steelcraft

STEELCRAFT 4000 Hospital Beds

STEELCRAFT-4000-Hospital-Beds-product

Specifications

  • Product Name: Hospital Beds (Manual)
  • Model: Utility Care 4000
  • Product Code: 1207
  • Bed Type: Hi-Low ICU bed
  • Material: Stainless Steel Bows or P.P. Panels
  • Overall Length: 226 cm (89 inches)
  • Overall Width: 104 cm (41 inches)
  • Sleep Deck Height (low position): 51 cm (20 inches)
  • Sleep Deck Height (high position): 71 cm (28 inches)
  • Sleep Deck Area: 204 cm x 90 cm (80 x 35 inches)
  • Safe Working Load: 180 kgs (400 lbs)

Product Usage Instructions

Assembly

  1. Unpack all components carefully.
  2. Follow the assembly instructions provided in the manual.
  3. Ensure all parts are securely connected before use.

Adjusting Bed Height
To adjust the bed height:

  1. Locate the height adjustment mechanism.
  2. Turn the crank or use the electronic controls to raise or lower the bed as needed.
  3. Verify the bed is at the desired height before use.

Mattress Installation

  1. Select a suitable mattress size as per the specifications.
  2. Place the mattress evenly on the sleep deck.
  3. Ensure the mattress fits securely within the designated area.

Cleaning and Maintenance

  1. Regularly clean the bed frame and surfaces with a mild detergent and damp cloth.
  2. Inspect the bed for any loose bolts or parts and tighten if necessary.
  3. Refer to the user manual for specific maintenance guidelines.

FAQ

  • Q: What is the maximum weight capacity of the Utility Care 4000 bed?
    A: The safe working load of the Utility Care 4000 bed is 180 kgs (400 lbs).

  • Q: Can I use any mattress size with the Utility Care 2000T bed?
    A: The Utility Care 2000T bed requires a mattress size of 198 cm x 91.5 cm (78 x 36 inches) for optimal fit and comfort.

  • Q: How do I adjust the head section on the Utility Care 2000 (Fowler) bed?
    A: The head section of the Utility Care 2000 (Fowler) bed can be adjusted manually using the provided crank mechanism.

HOSPITAL BEDS (Manual)

UTILITY CARE 4000

P.C. No.: 1207
Hi-Low ICU bed with ‘U’ shape S.S. Bows and Membrane Panels

STANDARD FEATURES

  • 4 Mechanical functions with 4 cranks on bearings.
  • Back raising Hi-Low, Knee raising and Two way longitudinal tilt (trendelenburg and reverse trendelenburg).
  • 4 section on steel frame with mattress area of CRC strips of 18 gauge to facilitate cleaning and better mattress ventilation as per FDA norms world wide.
  • Anti-squeeze backrest and knee movement.
  • Stainless steel removable bows with removable laminated panels.
  • One stainless steel telescopic I.V. pole can be located at 4 corners with storage under sleep deck.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes.
  • Aluminium collapsible railings below sleep deck.
  • Corner roller buffers.
  • Epoxy powder coated finished.

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Full length stainless steel drop railings at extra cost.
  • Lifting pole.
  • 4 sectional mattress.
  • Base cover.
  • Oxygen cylinder cage.

UTILITY CARE 4000
P.C. No.: 1207A
Hi-Low ICU bed with P. P. Panels

TECHNICAL SPECIFICATIONS* Approximate

  • Overall bed length 226 cms (89”)

  • Width with side railings up or down 104 cms (41”)
    Height of sleep deck (low position) 51 cms (20”)

  • Height of sleep deck (high position) 71 cms (28”)

  • Sleep deck area 204 cms x 90 cms (80” x 35”)

  • 4 section mattress 201 cms x 89 cms (79” x 35”)

  • Head section articulation 0 through 80°

  • Knee section articulation 0 through 35°

  • Trendelenburg / reverse trendelenburg 10°

  • Castor size 12.5 cms (5”)

  • Under clearance when sleep deck at height of 56 cms (22”) 13 cms (5”)

  • Safe working load 180 kgs (400 lbs)

UTILITY CARE 2000T (SEMI FOWLER)

P. C. No.: 1210
Recovery bed with perforated sheet top, SS Bows with membrane panels, trolley base and two mechanical functions on crank mechanism – back raising and longitudinal tilting

STANDARD FEATURES

  • Back raising and two way longitudinal tilt, (Trendelenburg & reverse trendelenburg position) on crank mechanism.
  • 2 section on steel frame with mattress area of CRC strips of 18 gauge to facilitate cleaning and better ventilation as per FDA norms world wide.
  • Anti squeeze backrest and tilt movement.
  • Head and foot board with removable stainless steel bows and membrane panels.
  • One SS I.V. pole can be located at 4 corners with storage under sleep deck.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes and two without brakes.
  • Epoxy powder coated finished.
  • Below sleep deck collapsible Aluminium railings.

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Slide down rail EPC.
  • Base cover.
  • 2 sectional mattress.
  • Oxygen cylinder cage.

UTILITY CARE 2000T (SEMI FOWLER)
P. C. No.: 1210A
Recovery bed with perforated sheet top, P.P. board, trolley base and two mechanical functions on crank mechanism – back raising and longitudinal tilting

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall length with knobs (1210) 216 cms (85″)
  • Overall leneth (1210A) 209 cms (82.5″)|
  • Overall width with side rail 104 cms
  • Overall height (fixed)  (41″) 56 cms (22″)
  • Sleep deck area 198 cms x 91.5 cms (78″x 36″)
  • Head section articulation 0 through 80 degree
  • Trendelenburg & reverse trendelenburg 9 degree
  • Castor size   12.5 cms (5″)

UTILITY CARE 2000 (FOWLER)
P.C. No.: 1211
Cranks operated backrest and kneerest with S.S. Bows and membrane panelSTEELCRAFT-4000-Hospital-Beds- \(5\)

STANDARD FEATURES

  • Back raising and knee raising on crank mechanism.
  • 4 sections of steel frame with mattress area of CRC strips of 18 gauge to facilitate cleaning and better ventilation as per FDA norms world wide.
  • Anti squeeze back rest and knee movements.
  • Stainless steel removable bows with removable laminated panels.
  • One stainless steel I.V. pole can be located at 4 corners with storage under sleep deck.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes and two without brakes.
  • Epoxy powder coated finished.

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Below the sleep deck drop railings.
  • Below sleep deck collapsible aluminium railings.
  • P. P. Boards.
  • 4 Sectional Mattress.

UTILITY CARE 2000 (FOWLER)
P.C. No.: 1211A
Cranks operated backrest and kneerest with P.P. BoardsSTEELCRAFT-4000
-Hospital-Beds- \(6\)

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall Bed length with knobs (1211) 216 cms (85”)
  • Overall Bed length (1211A) 209 cms (82.5”)
  • Width with side rail up 104 cms (41”)
  • Width with side rail down 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Head section articulation 0 through 80°
  • Knee section articulation 0 through 35°
  • Sleep deck area 198 x 90 cms (78” x 35.5”)
  • Mattress size required in 4 section 195 x 89 cms (77” x 35”)
  • Castor size 12.5 cms (5”)
  • Safe working load 180 kgs (400 lbs.)

UTILITY CARE 1000 (SEMI FOWLER)
P. C. No.: 1212
Crank operated backrest, S.S. Bows with Membrane Panel and perforated sheet top

STEELCRAFT-4000-Hospital-Beds- \(7\)

STANDARD FEATURES

  • Back raising on crank mechanism.
  • 2 sections of steel frame with mattress area of CRC strips of 18 gauge to facilitate cleaning and better ventilation as per FDA norms world wide.
  • Anti squeeze back rest.
  • Head and foot board with removable stainless steel bows and membrane panels.
  • One stainless steel I.V. pole can be located at 4 corners.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes and two without brakes.
  • Epoxy, powder coated finished.

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Below sleep deck drop railings.
  • Below sleep deck collapsible railings.
  • 2 sectional mattress.

UTILITY CARE 1000 (SEMI FOWLER)
P. C. No.: 1212A
Crank operated backrest, P.P. Panels and perforated sheet topSTEELCRAFT-4000
-Hospital-Beds- \(8\) *TECHNICAL SPECIFICATIONS Approximate**

  • Overall Bed length including Knob (1212) 216 cms (85”)
  • Overall Bed length (1212A) 209 cms (82.5”)
  • Width with side rail up 104 cms (41”)
  • Width with side rail down 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Head section articulation 0 through 80°
  • Sleep deck area 198 x 90 cms (78” x 35.5”)
  • Mattress size required in 2 section 195 x 89 cms (77” x 35”)
  • Castor size 12.5 cms (5”)
  • Safe working load 180 kgs (400 lbs.)

BASIC CARE 2000 (FOWLER)

P.C. No.: 1214
Crank operated backrest and kneerest with M.S. Bows and Membrane Panel

STEELCRAFT-4000-Hospital-Beds- \(9\)

STANDARD FEATURES

  • Back raising and knee raising on crank mechanism.
  • Four section steel frame mattress with perforated sheet top.
  • Anti squeeze backrest and knee movements.
  • Head and foot board with removable MS bows and removable membrane panels.
  • One stainless steel I.V. pole can be located at 4 corners with storage under sleep deck.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes and two without brakes.
  • Epoxy powder coated finished.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall Bed length with knobs 216 cms (85”)
  • Overall Bed length 209 cms (82.5”)
  • Width with side rail up 104 cms (41”)
  • Width with side rail down 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Head section articulation 0 through 80°
  • Knee section articulation 0 through 35°
  • Sleep deck area 198 x 90 cms (78” x 35.5”)
  • Mattress size required in 4 section 195 x 89 cms (77” x 35”)
  • Castor size 12.5 cms (5”)
  • Safe working load 180 kgs (400 lbs.)

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Below sleep deck drop railings.
  • Below sleep deck collapsible railings.
  • P. P. Boards.
  • 4 sectional mattress.

BASIC CARE 1000 (SEMI FOWLER)
P.C. No.: 1215
M.S. Bows with laminated head and foot boardsSTEELCRAFT-4000-Hospital-Beds-
\(10\)

STANDARD FEATURES

  • Back raising on crank mechanism.
  • Two section steel frame mattress with perforated sheet top or 18 gauge to facilitate cleaning and better mattress ventilation as per FDA norms world wide.
  • Anti squeeze back rest.
  • Head and foot board with M.S. removable bows and detachable laminated.
  • One stainless steel I.V. pole can be located at 4 corners.
  • Urine bag holder provided on both sides.
  • Four non rusting castors 12.5 cms (5”), two castors with brakes and two without brakes.
  • Epoxy powder coated finished.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall Bed length including Knob 216 cms (85”)
  • Overall Bed length 209 cms (82.5”)
  • Width with side rail up 104 cms (41”)
  • Width with side rail down 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Head section articulation 0 through 80°
  • Sleep deck area 198 x 90 cms (78” x 35.5”)
  • Mattress size required in 2 section 195 x 89 cms (77” x 35”)
  • Castor size approx 12.5 cms (5”)
  • Safe working load 180 kgs (400 lbs.)

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Below sleep deck drop railings.
  • Below sleep deck collapsible railings.
  • 2 sectional mattress.

ECONOMY CARE 1000 (SEMI FOWLER)
P. C. No.: 1217
Fixed height STEELCRAFT-4000-Hospital-Beds- \(11\)

STANDARD FEATURES

  • Back raising on crank mechanism.
  • Steel frame 2 sections, mattress area of CRC perforated top of 18 gauge.
  • Head and foot end with M.S. removable bows.
  • One stainless steel I.V. pole can be located at 2 corners, at head end.
  • Urine bag holder provided on both sides.
  • Without castors. without railings.
  • Epoxy powder coated finished.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall bed length 216 cms (85”)
  • Overall bed width 90 cms (35.5”)
  • Height of sleep deck 56 cms (22”)
  • Sleep deck length & width 198 cms x 90 cms (78” x 35”)
  • Mattress size required 195 cms x 89 cms (77” x 35”)
  • Head articulation 0 through 80°
  • Safe working load
  • Without castors, without railings 180 kgs (400 lbs.)

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Full end M.S. Epoxy coated below the deck drop railings.
  • 2 Sectional mattress.

PRIMARY CARE (SEMI FOWLER)
P. C. No.: 1218
P erforated backrest with ratchetSTEELCRAFT-4000-Hospital-Beds-
\(12\)

STANDARD FEATURES

  • 2 section steel frame with 18 gauge CRC perforated top.
  • Head and foot end with M.S. tubular removable bow.
  • Back raising on manual ratchet.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall bed length 216 cms (85”)
  • Overall bed width 90 cms (35.5”)
  • Overall bed width with railings 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Sleep deck length & width 198 cms x 90 cms (78” x 35.5”)
  • Mattress size in 2 section 195 cms x 89 cms (77” x 35”)
  • Safe working load
  • Without castors, without railings 180 kgs (400 lbs.)

PRIMARY CARE (PLAIN BED)
P. C. No.: 1218A
Single section perforated sheet top

STEELCRAFT-4000-Hospital-Beds- \(13\)

STANDARD FEATURES

  • Steel frame single section with 18 gauge CRC perforated top.
  • Without castors, without railings.
  • M.S. tubular bow removable.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall bed length 216 cms (85”)
  • Overall bed width 90 cms (35.5”)
  • Overall bed width with railings 104 cms (41”)
  • Height of sleep deck 56 cms (22”)
  • Sleep deck length & width 198 cms x 90 cms (78” x 35.5”)
  • Mattress size single section 1 95 cms x 89 cms (77” x 35”)
  • Without castors, without railings 180 kgs (400 lbs.)

OPTIONAL FEATURES AT EXTRA COST (ACCESSORIES)

  • Full end M.S. Epoxy coated below the duck drop railings.
  • Mattress 10 cms (4”) thick with rexine cover.
  • Stainless steel I.V. pole.

ATTENDANT BED REGULAR
P. C. No.: 1219
Without head and foot end bows

STEELCRAFT-4000-Hospital-Beds- \(14\)

STANDARD FEATURES

  • Mattress area of CRC strips.
  • Without castors, without railings.
  • Epoxy, powder coated finished.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall bed length 198 cms (78”)
  • Safe working load
  • Height of sleep deck 45.7 cms (18”)
  • Mattress size required 196 cms x 76 cms (77” x 30”)
  • Overall bed width 76.2 cms (30”)
  • Without castors, without railings 180 kgs (400 lbs.) STEELCRAFT-4000-Hospital-Beds- \(15\)

STANDARD FEATURES

  • Mattress area of CRC perforated top.
  • Head and foot end removable M.S. tubular bows.
  • Without castors, without railings.
  • Epoxy, powder coated finished.

*TECHNICAL SPECIFICATIONS Approximate**

  • Overall bed length 198 cms (78”)
  • Overall bed width 76 cms (30”)
  • Height of sleep deck 45.7 cms (18”)
  • Mattress size required 190 cms x 76 cms (75” x 30”)
  • Safe working load
  • Without castors, without railings 180 kgs (400 lbs.)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals