KOAMTAC SKX SmartSled Pistol Grip Extended Battery Instruction Manual

: June 6, 2024
: KOAMTAC

Table of Contents

What’s in the Box? – Pistol Grip
What’s in the Box? – Extended Battery
Assembly Instructions
Contact PCB Assembly – SKXPro Only
Contact PCB Assembly – SKX5 Only
Pistol Grip Adaptor Assembly
Pistol Grip Assembly
Removing the Pistol Grip
6000mAh Li-Polymer Battery Assembly Instructions
Extended Battery Assembly
Removing Extended Battery
Pistol Grip Battery/Extended Battery
Indicator Status
Additional Accessories
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**KOAMTAC SKX SmartSled Pistol Grip Extended Battery Instruction Manual

**

What’s in the Box? – Pistol Grip

1x Pistol Grip
1x Pistol Grip Adpater
1 x Contact PCB (SKXPro or SKX5)
1 x Companion Cushion (SKXPro or SKX5)
1 x 6000mAh Li-Polymer Battery (optional)
4x screws + 1 extra

SKXPro/SKX5 sold separately.
Tweezers and PH0 screw driver (not included) will be necessary to complete assembly.

What’s in the Box? – Extended Battery

1x Extended Battery Adapter
1x Extended Battery
1 x Contact PCB (SKXPro or SKX 5)
1 x Companion Cushion (SKXPro or SKX5)
4x screws + 1 extra

Assembly Instructions

Using tweezers, carefully remove all four (4) screw caps from the back of the SKX™ SmartSled®. Then, remove all (4) screws from the back of the SKX together with the companion cover. (A)
Assembly Instructions

Contact PCB Assembly – SKXPro Only

Remove the blue protective tape from the front of the companion PCB. Next, attach the contact board to the back of the SKXPro as shown below. (B)
Remove the transparent protective tape from the back of the companion cushion and attach it to the back of the SKXPro as shown below. (C)

Contact PCB Assembly – SKX5 Only

Remove the blue protective tape from the front of the companion PCB. Next, attach the contact board to the back of the SKX5 as shown in the image. (D)
Remove the transparent protective film from the back of the companion cushion and attach it to the back of the SKX5 as shown below. (E)

Pistol Grip Adaptor Assembly

Align the screw holes of the Pistol Grip Adaptor with the screw holes of the SKX SmartSled. Use the four (4) included screws to attach the Pistol Grip Adaptor to theSKX SmartSled. (F)
Pistol Grip Adaptor Assembly

Pistol Grip Assembly

Align the top notch of the Pistol Grip with the top notch of the Pistol Grip Adapter. Slide the Pistol Grip up until it clicks. (G)
Pistol Grip Assembly

Removing the Pistol Grip

Squeeze the tabs on both sides of the Pistol Grip Adapter and slide the Pistol Grip down. Pull the Pistol Grip away from the Pistol Grip Adapter and the SKX SmartSled. (H)
Removing the Pistol Grip

6000mAh Li-Polymer Battery Assembly Instructions

Turn the knob on the bottom of the Pistol Grip counter-clockwise to open the battery door. (I)
Insert the battery into the Pistol Grip. (J)
Close the battery door and turn the battery door knob clockwise to lock. (K)

Extended Battery Assembly

Align the top notch of the Extended Battery with top notch of the Extended Battery Adaptor. Slide Extended Battery up until it clicks. (L)
Extended Battery Assembly

Removing Extended Battery

Squeeze the tabs on both sides of the Extended Battery Adaptor and slide the Extended Battery down. Pull the Extended Battery away from the Extended Adaptor and the SKX SmartSled. (M)
Removing Extended Battery

Pistol Grip Battery/Extended Battery

Indicator Status

When Charging
Green: Fully Charged
Orange: Charging
Red: Low Battery
When in use
Blinking Green: Fully Charged
Blinking Orange: Discharging
Blinking Red: Low Battery