tommee tippee 0423224 Multiwarm Bottle and Pouch Warmer Instruction Manual
- June 10, 2024
- Tommee Tippee
Table of Contents
0423224 Multiwarm Bottle and Pouch Warmer
Instruction Manual
0423224 Multiwarm Bottle and Pouch Warmer
IMPORTANT WARNINGS!
These instructions can also be found at
www.tommeetippee.com Keep this instruction
sheet for future reference as it includes important information. This
appliance is intended for household use only. Do not use outdoors. Before
plugging in the bottle and pouch warmer for the first time ensure that the
voltage is compatible with your electricity supply by checking the label on
the base of the unit. Ensure water has been added to the unit before switching
the unit on. Do not immerse in water. To protect against fire, electric shock
and injury to persons do not immerse cord, plugs or other parts of the unit in
water or other liquid. Misuse of the product may result in the risk of fire,
electric shock and/or personal injury. This appliance can be used by persons
aged 14 years and above if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Cleaning and user maintenance shall not be made by children unless
they are aged 14 years and above and supervised. Keep this appliance and it’s
cord out of the reach of children. This appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children do not understand the dangers
associated with operating electrical appliances. Do not allow children to play
with this appliance. The heating element surface is subject to residual heat
after use. Do not touch hot surfaces use handles and knobs. Ensure that the
heating guidelines are followed to ensure that the food is not heated for too
long. For your child’s safety – Always check milk temperature before feeding
by testing on a sensitive part of your skin. Do not operate any appliance with
a damaged cord or plug or after the appliance malfunctions or has been damaged
in any manner. If the supply cord is damaged it must be changed by a qualified
person in order to avoid a hazard. Always use on a dry flat heat resistant
kitchen surface. Do not move appliance when in use. Do not let the cord hang
over edge of kitchen work surface or touch hot surfaces. The product has been
fitted with a cord wind on the base of the unit to allow you to adjust the
length of the cord safely. It is recommended that the cord be kept as short as
possible. Do not use any accessories other than those supplied with this
appliance. The cord must exit the cable tidy using the exit recess. If the
cord is correctly placed in the tidy the product will sit level. Do not start
using the product if it is not sitting level. Regularly check the cord and
plug for signs of damage, if visible remove from use immediately. Lift cradle
must be used when operating the unit. The water inside the unit gets very hot
and can cause burns, please take care when removing items from the bottle and
pouch warmer.
SET UP
Please refer to instructions leaflet before use and remember to clean and descale your unit regularly. It is recommended to run one cycle of the unit before use. Please refer to the instructions in the Usage section.
USAGE
For your child’s safety always check milk temperature before feeding by testing on a sensitive part of the skin
Place the unit on a clean, dry kitchen work surface.
Plug unit into the mains power supply and switch on.| Lift the easy lift
cradle and place in the bottle or pouch.
For hygiene we recommend leaving the hood on the teat.| Place the easy lift
cradle into the unit and add 250ml/9floz of
water using your Tommee Tippee bottle.
Press power button to turn on the
unit. The LED will flash and beep once
to show the unit is in standby mode.| Select bottle type – press until
the LED is adjacent to your
requirement.| Select starting temperature –
press until the LED is adjacent to
the correct temperature of feed.
Select feed size – press until the LED is adjacent to the amount of feed to be
warmed. Remove feed after the cycle is completed taking care not to touch the
water inside the unit as it will have heated during the cycle. Empty unit and
wipe dry with a clean cloth.
TO RESET/SWITCH OFF
To cancel a cycle – hold down the power button for 3 seconds and the unit
will reset.
Press the power button, the unit will beep once to show the cycle has started.
When the cycle finishes the unit will beep 3 times, and LEDs will keep
flashing while the feed is still warm. Pressing any button will stop the LED
flashing, or it will automatically switch off after 45mins.
MULTIWARM BOTTLE AND POUCH WARMER
- Replace bottle and pouch warmer water after every use
- If mains power is disconnected unit will reset
- Unit does not maintain temperature of feed
- Unit will not allow you to change the selection whilst in operation
- Do not store a bottle or pouch in the unit
a. Cradle
b. Temperature selection
c. Power button
d. Volume or feed selection
e. Pouch or bottle type selection
f. Cable tidy
| BOTTLE TYPE | TEMPERATURE | FEED SIZE |
|---|---|---|
| Plastic | Room temp | 2-3 fl-oz |
| Glass | Fridge | 4-6 fl-oz |
| Pouch | Freezer | 6+ fl-oz |
Mayborn (UK) Limited,
Balliol Business Park, Newcastle upon Tyne, NE12 8EW, UK
EU Representative
May born France Sarl, 56 Rue de Paris,
Boulogne Billancourt, 92100 France
All IP rights held by Mayor (UK) Limited and/or its affiliates.
TOMMEE TIPPEE ®. Copyright © 2022. Made in UK.
Model number: 1149. Voltage: 220-240V~ 50/60Hz 500W.
0423224 00000922_1
(Any questions?
Visit our website: tommeetippee.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>