sauermann KIMP23 Infrared Remote Printer User Manual
- June 10, 2024
- sauermann
Table of Contents
KIMP23 REMOTE PRINTER FOR CLASSES
210 AND 310 PORTABLE INSTRUMENTS
USER MANUAL
Technical features
Dimensions (without protective cover): 85.5 mm x 150 mm x 55 mm
Weight (without protective cover): 400 g
Operating temperature: from 0 to 50 °C
Storage temperature: from -20 to +60 °C
Print values during the measurement
– Press On/Off button of the printer to turn it on.
– Press “Imprim” function key of the portable instrument on the measurement
screen.
Measurement results are printing on the ticket.
– Press On/Off button when printing is finished to turn the printer off.
In order to have a correct printing, infrared sensors of the printer and
portable instrument must be face each other (see pictures above).
Change the paper roll
– Raise the upper part of the printer pulling up the transparent part.
– Put a new paper roll (both sides of the paper are different: the brightest
side is the printed side and must faced the user).
– Pull up about 0.50 cm of paper.
– Close the upper part of the printer.
Change the batteries
– Remove the protective cover of the printer.
– Remove the batteries cover.
– Remove the used batteries.
– Put some new 1.5 V LR6 AA batteries observing proper polarity.
– Put the battery cover.
LED indications
The LED above the On/Off button has several meanings:
– Continuous green: printer turned on and ready to operate
– Sequence of one flash: paper is missing or there is not any paper out the
printer → put a paper roll or let 0.5 cm of paper out
– Sequence of 2 flashes : thermal too hot → let the head cool down
– Sequence of 3 flashes : discharged → change batteries