Phylrich 1549HEXT Hot Extended Stem User Manual
- June 10, 2024
- PHYLRICH
Table of Contents
Phylrich 1549HEXT Hot Extended Stem User Manual
ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
The prices shown in this online catalog supersede all previous catalogs. We
also reserve the right to correct misprints.
PHYLRICH USA
1261 Logan Avenue, Costa Mesa, California 92626
Phone: 714.361.4830 Fax: 714.617.3120
customer.service@phylrich.com
www.phylrich.com
Limited Warranty
This Limited Warranty is expressly in lieu of any other warranties, expressed
or implied, arising by law or otherwise, including without limitation, any
implied warranty of merchantability or for a particular purpose. This Limited
Warranty may not be altered, varied, or extended, except by a written
instrument executed by Phylrich. The remedy or repair or replacement as
provided under this Limited Warranty is exclusive. In no event shall the
manufacturer be liable for any consequential or incidental damages to any
person, whether or not occasioned by negligence of Phylrich, including without
limitation damages for loss of use, costs of property damage or other monetary
loss.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply. This warranty gives you
specific legal rights and you may also have other rights which vary from state
to state.
This warranty covers product installed in the United States and Canada.
Several types of limited warranties are applicable to decorative plumbing and
hardware products as follows:
Mechanical Warranty: This warranty covers the ability of the product to function properly under normal conditions. Our products are warrantied to the original purchaser to be free of defects in material and workmanship for a period of 10 years from the date of purchase. Because plumbing valves have several mechanical differences due to the function i.e. faucet valves vs. thermostatic shower valves, the following valve warranties are established: Ceramic disc valves are warranted for life as long as the original purchaser owns the house in which they are installed. Other types of valves, to include thermostatic and balance pressure shower valves, etc. are warranted for one year from the date of purchase.
Finish Warranty: Because certain metal finishes are more durable than others and certain applications require more durability, 4 finish warranties have been established:
-
Centdart finishes such as antique brass, satin nickel and satin brass are coated with an organic clear coating.
These coated types of finishes are warranted for 10 years from the date of shipment to the original purchaser. -
Fimisttestarder surfaces such as polished chrome, Physical Vapor Deposition (PVD) finishes and powder-coated finishes are warranted for as long as the original purchaser owns the home.
-
so Elded “living finishes” are not warranted. These finishes have no protective coating and thus are designed to change with age and use.
-
Finishes on Drains: Because of the use and abuse of the metal surface that occurs on sink and bath drains with soaps and cleaning solutions, only drains in the “B” category above are warranted. This warranty is for one year from date of purchase. Drains in the above A and C categories are not warranted.
The warranties described above are specific rights, but there may be other rights that vary from state to state.
If you have a problem with one of our products, here is what is covered and
how you should proceed:
First of all, consult the dealer from whom you purchased the product. Please
provide proof of purchase in the form of an original invoice or receipt. If
the dealer is an authorized Phylrich dealer, he will review the problem and
contact the Phylrich customer service department on your behalf. If you cannot
contact your dealer, please e-mail our customer service at
customer.service@phylrich.com and describe the
problem along with your contact information. The Phylrich Warranty does not
assume liability for charges such as labor, freight, removal and
reinstallation or injuries resulting from a defective product. Phylrich will
repair or replace defective parts after it has been established that the
product is defective and that the parts are covered by this warranty. Phylrich
reserves the right to determine whether to repair or replace the product under
consideration.
Phylrich products must be installed in accordance with the instructions
provided with the product. Make sure your installer out all debris such as
solder before assembly. Plumber’s putty should not be used on any decorative
surface as it could harm the and void the warranty. For proper maintenance do
not use any abrasive cleaners, strong cleaning solutions or polishing
compounds. Usually a soft damp cloth will Non-abrasive waxes can also be used.
Ordering and Policy Information
Ordering
- Please refer to the items by product number and description as listed in the following price list.
- Please refer to the finish on the specified product with the finish codes listed on pages 3-4.
- Minimum order is $50.00 net.
Changes and Cancellations
- Changes and/or cancellations must be made within five working days from the date of the order.
- Orders accepted by Phylrich for non-standard (customized) products are non-cancelable and non-returnable.
Pricing
Pricing and product specifications are subject to change without notice.
Taxes
All Federal, State or Local Taxes, when applicable, will be added.
Terms
• 1% 10 davs, net 30.
Freight Policy
- Product shipped to destinations in the United States and Canada will be F.O.B. our factory, freight charges will be added to the invoice.
- Product shipped to destinations outside the United States and Canada are F.O.B. our factory plus 5% for packaging.
- All orders for $2,500 net or more, shipping direct to our accounts in the Continental United States, will be FFA.
- We will not drop ship outside the Phylrich sales territory to which a customer is assigned.
Claims
All claims for shortages or damages must be made within 5 days of receipt of
goods by the customer.
Returns
Returns will only be accepted at Phylrich when accompanied by a Return Goods
Authorization. (RGA) All RGA requests should be submitted to the Phylrich
Customer Service Dept. Credit or replacement will be allowed only after
careful inspection indicates a manufacturing defect or factory order entry
error. Factory inspections are FREIGHT ON ALL RETURNS MUST BE PREPAID.
- All credits are product credit only. No checks will be issued. Phylrich does not accept debit memos.
- All product accepted by Phylrich for credit is subject to a minimum charge of 35% handling.
- If received over 90 Days from the date of the invoice, a minimum 50% charge will be assessed.
- Any product received by Phylrich that has been damaged, will be returned to the customer and no credit will be given.
Part Price List – 2013
| PART #
Description
Group 1
Group 2
---|---
Faucet Common Parts
NOW|
3-095| M501L| 1.2 gpm, 15/16″ Aerator for Lavatory Faucet (Please specify
finish)| $40.00| $70.00
| M501S| 1.2 gpm 13/16″ Aerator for Lavatory Faucet (Please specify finish)|
$40.00| $60.00
| 22M501L| 2.2 gpm, 15/16″ Aerator for Lavatory Faucet (Please specify
finish)| $60.00| $80.00
| 22M501S| 2.2 gpm, 13/16″ Aerator for Lavatory Faucet (Please specify
finish)| $40.00| $60.00
| M501104| Amphora Aerator| $16.00|
| M501BASIC| Aerator and Key for Basic and Amphora Collection Lavatory
Ensembles| $16.00|
901-1/| 901-1| Lav Grid Drain Less Overflow for Vessel Sink| $110.00| $220.00
3-046/| LD499P| Complete Lav Pop-Up Drain w/ Overflow (Specify finish)
(Current ball rod is 7″,custom if requested 13″)| $75.00| $150.00
2-102/| LD499PX1| Automatic Lavatory Drain, Flange and Plug (Please specify
finish) only for after 99| $45.00| $90.00
2-101| LD499PX3| Automatic Lavatory Drain, Ball Rod Assembly , only for after
99| $35.00|
90507| LD499PX4| Automatic Lavatory Drain, O-ring| $2.00|
10794| | Ball Rod| $10.00|
1-109| LV499C| Complete Lavatory Valve for Cold Lever Handle| $68.00|
1-110| LV499H| Complete Lavatory Valve for Hot Lever and for Hot and Cold
Round Handle| $68.00|
10985| | Cartridge, Single Handle Lav| $50.00|
| LV499CS| Complete Lavatory Valve for Cold Lever Handle – Short| $121.00|
| LV499HS| Complete Lavatory Valve for Hot Lever and for Hot and Cold Round
Handle – Short| $121.00|
10235| LC499CNL| No Lead Cartridge for Cold Lever Handle Valves
(1991-Current)| $27.00|
10236| LC499HNL| No Lead Cartridge for Hot Lever Handle, Hot and Cold
Round/Cross Handle Valves (1991-Current)| $27.00|
| 468101| 1/2″ Central Brass cartridge for Lav. for Cold side (between 1989 &
1991)| $100.00|
| 468102| 1/2″ Central Brass cartridge for Lav. for Hot side (between 1989 &
1991)| $100.00|
| P35281| Nut and Washer Kit for LV499| $10.00|
| 2003C| Complete Tee Assembly: Brass Nut, Spout Tee, Brass Washer, Fiber
Gasket, Cone Washer| $38.00|
| 4015| Brass Coupling Nut| $6.00|
| 954A| Cone washer for Lav Tee Assembly| |
| 28A| Brass Washer for Tee Assembly| $4.00|
| P33002| 7″ Pop Up Guide| $15.00|
| TLKIT| Parts Kit: C-Washer, 3/8-27 Nipple, 2″ Extension nut, and Gasket
(tee less)| $27.00|
11097| | Blank Plastic Button (Hex Trad. / Henri)| $6.00|
11098| | Cold Plastic Button (Hex Trad. / Henri)| $6.00|
11099| | Hot Plastic Button (Hex Trad. / Henri)| $6.00|
| 10PCBAG| Parts Kit:1/2″ Flex Line Hoses, Complete Lavatory Tee Assembly,
Coupling Nut and Washer| $67.00|
10719/| 13ROD| Pop-Up Rod (Please specify finish)| $56.00| $73.00
1-112| | Dry Tee (Basic, Basic II)| |
10720| 19000638TL| Hoses for TeeLess 14min| $35.00|
10982| | HOSE, 3/8″ COMP. X 1/2″ NPSM – 12″L| $27.00|
| WALLSTEM| Stem, Nipple, Nut Kit for Lavatory Wall Valve| $30.00|
SAME| P38002| 8-32 x 3/16 set screw k360| $1.00|
SAME| P39001| hex key 5/64 hex key for handle| $3.00|
| Lavatory Ensemble: Trim Parts (Please specify finish)
Group 1
Group 2
| Column1| Column2| Column3| Column4
| P36002| 1/4-20 Screw for Regent / Versailles / Louis XIV / marquis| $4.00|
| D206X1SET| 3Ring 1 Pair of Curved Lever Handles| $138.00| $151.00
| D205X1SET| 3Ring 1 Pair of Straight Lever Handles| $120.00| $132.00
| P04019/| BASIC POP-UP KNOB| $20.00| $40.00
| DB205GD| 3Ring Bridge Faucet Grid Drain with Overflow| $44.00| $48.00
---|---|---|---|---
P01080/| D206X1L| 3Ring Curved Lever Handle Complete Left| $89.00| $98.00
P01082/| D206X1R| 3Ring Curved Lever Handle Complete Right| $89.00| $98.00
| D205X2| 3Ring Escutcheon Complete| $93.00| $104.00
P04022/| D205X4| 3Ring Pop Up Knob| $90.00| $100.00
P03038/| D205X3A| 3Ring Spout Base| $355.00| $391.00
| D205X3| 3Ring Spout Complete| $300.00| $331.00
| D205X1| 3Ring Straight Lever Handle Complete| $81.00| $90.00
| K105X3A| Amphora Flair Base for Lavatory Spout – Please use K104X3A| |
| K105X2| Amphora Flair Escutcheon Complete – Please use K104X2| |
| K105X1| Amphora Flair Handle Complete| $120.00| $165.00
| K105X3| Amphora Flair Lavatory Spout Complete – Please use K104X3| |
| K105X4| Amphora Flair Pop Up Knob| $75.00| $95.00
| K104X3A| Amphora Ribbon Base Lavatory Spout| $48.00| $63.00
| K104X2| Amphora Ribbon Escutcheon Complete| $106.00| $150.00
| K104X1| Amphora Ribbon Handle Complete| $120.00| $165.00
| K104X3| Amphora Ribbon Lavatory Spout Complete| $446.00| $580.00
| K104X4| Amphora Ribbon Pop Up Knob| $75.00| $110.00
| K361X2| Barcelona Escutcheon Complete – Please use K141X2| |
| K361X1| Barcelona Handle Complete – Please use K110X1| |
| K361X3| Barcelona Lavatory High Spout Complete – Please use K360X3| |
| K361X4| Barcelona Pop Up Knob – Please use K360X4| |
| K144X2| Baroque Escutcheon Complete| $148.00| $188.00
| K144X1| Baroque Handle Complete| $124.00| $158.00
| K144X3| Baroque Lavatory Spout Complete| $574.00| $728.00
| K144X4| Baroque Pop Up Knob| $169.00| $214.00
| D130X1SET| Basic A 1 Pair of Lever Handles| $242.00| $268.00
3-408| D130X1| Basic A Lever Handle only| $72.00| $121.00
| D134X1SET| Basic B 1 Pair of Tubular Cross Handles| $242.00| $268.00
3-439| D134X1| Basic B Tubular Cross Handle only| $121.00| $133.00
| D137X1B| Basic Blade Cross Handle Cap Handle| $77.00| $84.00
| D137X1SET| Basic C 1 Pair of Blade Cross Handles| $158.00| $208.00
3-440| D137X1| Basic C Blade Handle only| $79.00| $87.00
| D130X1B| Basic Lever and Tubular Cross Handle Cap Handle| $49.00| $54.00
| D130X2| Basic Series Escutcheon Complete| $104.00| $117.00
3-179/| D130X3| Basic Series High Spout Complete| $232.00| $255.00
| D131X3| Basic Series Low Spout Complete| $227.00| $251.00
| D130X4| Basic Series Pop Up Knob| $87.00| $97.00
| D130X3A| Basic Series Spout Base| $106.00| $118.00
| D132X3| Basic Series Square Spout Complete| $190.00| $209.00
4-448D/| K158DX1| Carrara Beige Marble Handle Compete| $105.00| $135.00
4-448C/| K158CX1| Carrara Black Marble Handle Compete| $105.00| $135.00
| K158X1B| Carrara End Cap and Threaded Rod for Handle| $66.00| $87.00
| K158X2| Carrara Escutcheon Complete – Please use K120X2| |
| K158AX1| Carrara Gray Marble Handle Compete| $101.00| $127.00
4-448F/| K158FX1| Carrara Green Marble Handle Compete| $117.00| $147.00
| K158X3| Carrara Lavatory Spout Complete – Please use K120X3| |
| K158X4| Carrara Pop Up Knob – Please use K120X4| |
4-448B/| K158BX1| Carrara White Marble Handle Compete| $105.00| $135.00
| K184X2| Dolphin Cut Crystal Escutcheon Complete – Please use K180X2| |
| DB205GD| 3Ring Bridge Faucet Grid Drain with Overflow| $44.00| $48.00
---|---|---|---|---
P01080/| D206X1L| 3Ring Curved Lever Handle Complete Left| $89.00| $98.00
P01082/| D206X1R| 3Ring Curved Lever Handle Complete Right| $89.00| $98.00
| D205X2| 3Ring Escutcheon Complete| $93.00| $104.00
P04022/| D205X4| 3Ring Pop Up Knob| $90.00| $100.00
P03038/| D205X3A| 3Ring Spout Base| $355.00| $391.00
| D205X3| 3Ring Spout Complete| $300.00| $331.00
| D205X1| 3Ring Straight Lever Handle Complete| $81.00| $90.00
| K105X3A| Amphora Flair Base for Lavatory Spout – Please use K104X3A| |
| K105X2| Amphora Flair Escutcheon Complete – Please use K104X2| |
| K105X1| Amphora Flair Handle Complete| $120.00| $165.00
| K105X3| Amphora Flair Lavatory Spout Complete – Please use K104X3| |
| K105X4| Amphora Flair Pop Up Knob| $75.00| $95.00
| K104X3A| Amphora Ribbon Base Lavatory Spout| $48.00| $63.00
| K104X2| Amphora Ribbon Escutcheon Complete| $106.00| $150.00
| K104X1| Amphora Ribbon Handle Complete| $120.00| $165.00
| K104X3| Amphora Ribbon Lavatory Spout Complete| $446.00| $580.00
| K104X4| Amphora Ribbon Pop Up Knob| $75.00| $110.00
| K361X2| Barcelona Escutcheon Complete – Please use K141X2| |
| K361X1| Barcelona Handle Complete – Please use K110X1| |
| K361X3| Barcelona Lavatory High Spout Complete – Please use K360X3| |
| K361X4| Barcelona Pop Up Knob – Please use K360X4| |
| K144X2| Baroque Escutcheon Complete| $148.00| $188.00
| K144X1| Baroque Handle Complete| $124.00| $158.00
| K144X3| Baroque Lavatory Spout Complete| $574.00| $728.00
| K144X4| Baroque Pop Up Knob| $169.00| $214.00
| D130X1SET| Basic A 1 Pair of Lever Handles| $242.00| $268.00
3-408| D130X1| Basic A Lever Handle only| $72.00| $121.00
| D134X1SET| Basic B 1 Pair of Tubular Cross Handles| $242.00| $268.00
3-439| D134X1| Basic B Tubular Cross Handle only| $121.00| $133.00
| D137X1B| Basic Blade Cross Handle Cap Handle| $77.00| $84.00
| D137X1SET| Basic C 1 Pair of Blade Cross Handles| $158.00| $208.00
3-440| D137X1| Basic C Blade Handle only| $79.00| $87.00
| D130X1B| Basic Lever and Tubular Cross Handle Cap Handle| $49.00| $54.00
| D130X2| Basic Series Escutcheon Complete| $104.00| $117.00
3-179/| D130X3| Basic Series High Spout Complete| $232.00| $255.00
| D131X3| Basic Series Low Spout Complete| $227.00| $251.00
| D130X4| Basic Series Pop Up Knob| $87.00| $97.00
| D130X3A| Basic Series Spout Base| $106.00| $118.00
| D132X3| Basic Series Square Spout Complete| $190.00| $209.00
4-448D/| K158DX1| Carrara Beige Marble Handle Compete| $105.00| $135.00
4-448C/| K158CX1| Carrara Black Marble Handle Compete| $105.00| $135.00
| K158X1B| Carrara End Cap and Threaded Rod for Handle| $66.00| $87.00
| K158X2| Carrara Escutcheon Complete – Please use K120X2| |
| K158AX1| Carrara Gray Marble Handle Compete| $101.00| $127.00
4-448F/| K158FX1| Carrara Green Marble Handle Compete| $117.00| $147.00
| K158X3| Carrara Lavatory Spout Complete – Please use K120X3| |
| K158X4| Carrara Pop Up Knob – Please use K120X4| |
4-448B/| K158BX1| Carrara White Marble Handle Compete| $105.00| $135.00
| K184X2| Dolphin Cut Crystal Escutcheon Complete – Please use K180X2| |
| K184X1| Dolphin Cut Crystal Handle Complete – Please use K180X1| |
---|---|---|---|---
| K184X3| Dolphin Cut Crystal Lavatory Spout Complete – Please use K101X3| |
| K184X4| Dolphin Cut Crystal Pop Up Knob – Please use K181x4| |
| K101X2| Dolphin Escutcheon Complete| $155.00| $197.00
| K101X1L| Dolphin Handle Complete – Left| $240.00| $305.00
| K101X1R| Dolphin Handle Complete – Right| $208.00| $265.00
| K101X3| Dolphin Lavatory Spout Complete| $631.00| $799.00
| K101X4| Dolphin Pop Up Knob| $126.00| $161.00
| K811X1| Fillmore Complete Lever Handle| $237.00| $332.00
| K812X1| Fillmore Complete Rod Handle| $366.00| $512.00
| K813X1L| Fillmore Complete Woven Handle – Left| $285.00| $399.00
| K813X1R| Fillmore Complete Woven Handle – Right| $285.00| $399.00
| K813X1LA| Fillmore Complete Woven Left Handle Assembly| $213.00| $298.00
| K813X1RA| Fillmore Complete Woven Right Handle Assembly| $213.00| $298.00
| K811X2| Fillmore Handle Escutcheon| $83.00| $124.00
| K811X1A| Fillmore Lever Handle Assembly| $165.00| $231.00
| K811X4| Fillmore Pop Up Knob| $62.00| $93.00
| K812X1A| Fillmore Rod Handle Assembly| $294.00| $412.00
| K811X3| Fillmore Spout Complete| $497.00| $696.00
| K160X2| Georgetown Escutcheon Complete| $96.00| $121.00
| K162X2| Georgetown Escutcheon Complete – Please use K160X2| |
| K160X1| Georgetown Handle Complete| $66.00| $84.00
| K162X1| Georgetown Handle Complete – Please use K160X1| |
| K162X3| Georgetown Lavatory High Spout Complete – Please use K120X3| |
| K160X3| Georgetown Lavatory Low Spout Complete| $218.00| $277.00
| K160X4| Georgetown Pop Up Knob| $88.00| $112.00
| K162X4| Georgetown Pop Up Knob – Please use K120X4| |
| K360X3A| Georgian Bottom Plate for Lavatory Spout| $105.00| $134.00
| K141X3A| Georgian Bottom Plate for Lavatory Spout – no longer available,
please use K141X3| |
| K141X2| Georgian Escutcheon Complete| $147.00| $234.00
| K360X2| Georgian Escutcheon Complete – Please use K141X2| |
| K141X1| Georgian Handle Complete| $108.00| $138.00
| K360X1| Georgian Handle Complete – Please use K141X1| |
| K360X3| Georgian Lavatory High Spout Complete| $403.00| $789.00
| K141X3| Georgian Lavatory Low Spout Complete| $403.00| $789.00
| K141X3| Georgian Pop Up Knob| $82.00| $106.00
| K360X4| Georgian Pop Up Knob| $51.00| $65.00
| K111X1A| Harper Cylinder Handle Top Cap| $182.00| $273.00
| K111X1| Harper Cylinder Handle Assembly| $215.00| $323.00
| K111X3| Harper Lavatory Spout Assembly| $305.00| $458.00
| K112X1A| Harper Lever Handle and Set Screw| $181.00| $272.00
| K112X1| Harper Lever Handle Complete| $233.00| $350.00
3-134/| | Hex Series Lav Spout| $174.00| $312.00
3-141C/| | Hex Trad. Complete Lav (Cold)| $158.00| $284.00
3-141H/| | Hex Trad. Complete Lav (Hot)| $158.00| $284.00
3-141B/| | Hex Trad. Complete Lav (Blank)| $158.00| $284.00
2-180/| | Cross Handle only Hex Trad| $79.00| $142.00
10920/| | Hex series Pop Up Knob| $59.00| $75.00
| | | |
| K190X2| Jamestown Escutcheon Complete – Please use K120X2| |
| K190X1| Jamestown Handle Complete – Please use K120X1 or K120AX1| |
---|---|---|---|---
| K190X3| Jamestown Lavatory Spout Complete| $365.00| $464.00
| K190X4| Jamestown Pop Up Knob| $90.00| $118.00
| P01043| K181 Top Cap for Ball (Handle)| $20.00| $40.00
| K171X2| La Crosse Escutcheon Only – Please use K170X2| |
| K171X1| La Crosse Handle Only| $147.00| $187.00
| K171X3| La Crosse Lavatory Spout Complete – Please use K170X3| |
| K171X4| La Crosse Pop Up Knob – Please use K170X4| |
| K170X2| Le Verre Escutcheon Only| $110.00| $142.00
| K170X1| Le Verre Handle Only| $120.00| $152.00
| K170X3| Le Verre Lavatory Spout Complete| $446.00| $565.00
| K170X4| Le Verre Pop Up Knob| $91.00| $117.00
| K180X2C| Louis XIV Bottom Plate for Escutcheon – Please use K211X2C| |
| K180X1D| Louis XIV Crystal End Cap and Threaded Rod for Handle| $59.00|
$78.00
| K180X2| Louis XIV Crystal Escutcheon Complete| $164.00| $208.00
| K180X2B| Louis XIV Crystal for Escutcheon| $75.00|
| K180X1C| Louis XIV Crystal for Handle| $46.00|
| K180X1| Louis XIV Crystal Handle Complete| $127.00| $163.00
| K180X4| Louis XIV Crystal Pop Up Knob| $89.00| $112.00
| K180X4| Louis XIV Crystal Top Cap for Handle| $53.00| $69.00
| K180X3| Louis XIV Lavatory Spout| $490.00| $622.00
| K180X2A| Louis XIV Top Metal for Escutcheon| $93.00| $120.00
| K120X3A| Marquis Bottom Plate for Lavatory Spout| $102.00| $130.00
| K120X2| Marquis Escutcheon Complete| $95.00| $121.00
| K120X1BB| Marquis Handle Button, Blank (PORCELAIN ONLY)| $15.00|
| K120X1BCH| Marquis Handle Button, Chaud (PORCELAIN ONLY)| $15.00|
| K120AX1BCD| Marquis Handle Button, Cold (PORCELAIN ONLY)| $15.00|
| K120X1BFD| Marquis Handle Button: Froid (PORCELAIN ONLY)| $15.00|
| K120AX1BHT| Marquis Handle Button: Hot (PORCELAIN ONLY)| $15.00|
| K120X1DIV| Marquis Handle Complete: Blank| $134.00| $170.00
| K120X1CH| Marquis Handle Complete: Chaud| $134.00| $170.00
| K120AX1CD| Marquis Handle Complete: Cold| $134.00| $170.00
| K120X1FD| Marquis Handle Complete: Froid| $134.00| $170.00
| K120AX1HT| Marquis Handle Complete: Hot| $134.00| $170.00
| K120X4| Marquis Pop Up Knob| $88.00| $112.00
| K120X1A| Marquis Screw for Handle| $6.00|
| K120X3| Marquis Spout Complete| $244.00| $309.00
| K230X2C| Mirabella Bottom Plate for Escutcheon| $106.00| $236.00
| K310X2C| Mirabella Bottom Plate for Escutcheon – Please use K230X2C| |
| K234X2| Mirabella Frosted Crystal Escutcheon Complete| $112.00| $144.00
| K314X2| Mirabella Frosted Crystal Escutcheon Complete – Please use K234X2|
|
| K234X1| Mirabella Frosted Crystal Handle Complete| $154.00| $196.00
| K314X1| Mirabella Frosted Crystal Handle Complete – Please use K234X1| |
| K314X3| Mirabella Frosted Crystal Lavatory High Spout Complete – Please use
K360X3| |
| K234X3| Mirabella Frosted Crystal Lavatory Low Spout Complete – Please use
K141X3| |
| K234X2B| Mirabella Frosted Crystal Only for Escutcheon| $50.00|
| K314X2B| Mirabella Frosted Crystal Only for Escutcheon – Please use
K234X2B| |
| K234X1A| Mirabella Frosted Crystal Only for Handle| $47.00|
| K314X1A| Mirabella Frosted Crystal Only for Handle – Please use K234X1A| |
| K234X4| Mirabella Frosted Crystal Pop Up Knob| $76.00| $96.00
| K314X4| Mirabella Frosted Crystal Pop Up Knob – Please use K360X4| |
---|---|---|---|---
| K310X3| Mirabella Lavatory High Spout Complete – Please use K360X3| |
$123.00
| K230X3| Mirabella Lavatory Low Spout Complete – Please use K141X3| |
| K230X2A| Mirabella Top Nut for Escutcheon| $47.00| $62.00
| K310X2A| Mirabella Top Nut for Escutcheon – Please use K230X2A| |
| D103X1SET| Normandy 1 Pair of Handles| $117.00| $129.00
P02004/| D103X2| Normandy Escutcheon Complete – Please use D100X2| $70.00|
$120.00
| D203X2| Normandy Escutcheon Complete – Please use D100X2| |
| D103X1| Normandy Handle Complete| $117.00| $129.00
| D203X1| Normandy Handle Complete – Please use D103X1| |
| D203X4| Normandy Pop Up Knob for High Spout – Please use D200X4| |
| D103X4| Normandy Pop Up Knob for Low Spout – Please use D100X4| |
| D103X3| Normandy Spout Complete – Please use D100X3| |
| D203X3| Normandy Spout Complete – Please use D200X3| |
| K181X4| Regent Crystal Pop Up Knob| $81.00| $104.00
| K280X4| Regent Crystal Pop Up Knob – Please use K360X4| |
| K181X2C| Regent Cut Crystal Bottom Plate for Escutcheon – Please use
K180X2C| |
| K280X2C| Regent Cut Crystal Bottom Plate for Escutcheon – Please use
K181X2C| |
| K181X1D| Regent Cut Crystal End Cap and Threaded Rod for Handle – Please
use K180X1D| |
| K280X1D| Regent Cut Crystal End Cap and Threaded Rod for Handle – Please
use K181X1D| |
| K181X2| Regent Cut Crystal Escutcheon Complete| $141.00| $180.00
| K280X2| Regent Cut Crystal Escutcheon Complete – Please use K181X2| |
| K181X1| Regent Cut Crystal Handle Complete| $116.00| $147.00
| K280X1| Regent Cut Crystal Handle Complete – Please use K181X1| |
| K280X3| Regent Cut Crystal Lavatory High Spout – Please use K141X3| |
| K181X3| Regent Cut Crystal Lavatory Low Spout – Please use K141X3| |
| K181X1B| Regent Cut Crystal Top Cap for Handle – Please use K180X1B| |
| K280X1B| Regent Cut Crystal Top Cap for Handle – Please use K181X1B| |
| K181X2A| Regent Cut Crystal Top Metal for Escutcheon| $99.00| $128.00
| K280X2A| Regent Cut Crystal Top Metal for Escutcheon – Please use K181X2A|
|
| K272X2| Regent Bleu Sodalite Escutcheon Complete| $345.00| $438.00
| K372X2| Regent Bleu Sodalite Escutcheon Complete – Please use K272X2| |
| K372X3| Regent Bleu Sodalite Lavatory High Spout Complete – Please use
K360X3| |
| K272X3| Regent Bleu Sodalite Lavatory Low Spout Complete – Please use
K141X3| |
| K272X1C| Regent Bleu Sodalite Lever Handle – Please use K242X1C| |
| K272X1| Regent Bleu Sodalite Lever Handle Complete| $272.00| $344.00
| K372X1| Regent Bleu Sodalite Lever Handle Complete – Please use K272X1| |
| K272X2B| Regent Bleu Sodalite Only for Escutcheon – Please use K242X2B| |
| K272X4| Regent Bleu Sodalite Pop Up Knob| $184.00| $234.00
| K372X4| Regent Bleu Sodalite Pop Up Knob – Please use K360X4| |
| K274X2| Regent Frienze Black Onyx Escutcheon Complete| $194.00| $248.00
| K374X2| Regent Frienze Black Onyx Escutcheon Complete – Please use K274X2|
|
| K374X3| Regent Frienze Black Onyx Lavatory High Spout Complete – Please use
K360X3| |
| K274X3| Regent Frienze Black Onyx Lavatory Low Spout Complete – Please use
K141X3| |
| K274X1| Regent Frienze Black Onyx Lever Handle Complete| $138.00| $176.00
| K374X1| Regent Frienze Black Onyx Lever Handle Complete – Please use
K274X1| |
| K274X4| Regent Frienze Black Onyx Pop Up Knob| $96.00| $122.00
| K374X4| Regent Frienze Black Onyx Pop Up Knob – Please use K360X4| |
| K271X2| Regent Montaione Brown Onyx Escutcheon Complete| $224.00| $284.00
| K371X2| Regent Montaione Brown Onyx Escutcheon Complete – Please use
K271X2| |
| K371X3| Regent Montaione Brown Onyx Lavatory High Spout Complete – Please
use K360X3| |
---|---|---|---|---
| K271X3| Regent Montaione Brown Onyx Lavatory Low Spout Complete – Please
use K141X3| |
| K271X1| Regent Montaione Brown Onyx Lever Handle Complete| $151.00| $193.00
| K371X1| Regent Montaione Brown Onyx Lever Handle Complete – Please use
K271X1| |
| K271X4| Regent Montaione Brown Onyx Pop Up Knob| $144.00| $182.00
| K371X4| Regent Montaione Brown Onyx Pop Up Knob – Please use K360X4| |
| K270X2| Regent Green Onyx Escutcheon Complete| $175.00| $223.00
| K370X2| Regent Green Onyx Escutcheon Complete – Please use K270X2| |
| K370X3| Regent Green Onyx Lavatory High Spout Complete – Please use K360X3|
|
| K270X3| Regent Green Onyx Lavatory Low Spout Complete – Please use K141X3|
|
| K270X1| Regent Green Onyx Lever Handle Complete| $127.00| $163.00
| K370X1| Regent Green Onyx Lever Handle Complete – Please use K270X1| |
| K270X4| Regent Green Onyx Pop Up Knob| $96.00| $122.00
| K370X4| Regent Green Onyx Pop Up Knob – Please use K360X4| |
| K273X2| Regent Pink Onyx Escutcheon Complete| $194.00| $248.00
| K373X2| Regent Pink Onyx Escutcheon Complete – Please use K273X2| |
| K373X3| Regent Pink Onyx Lavatory High Spout Complete – Please use K360X3|
|
| K273X3| Regent Pink Onyx Lavatory Low Spout Complete – Please use K141X3|
|
| K273X1| Regent Pink Onyx Lever Handle Complete| $159.00| $201.00
| K373X1| Regent Pink Onyx Lever Handle Complete – Please use K273X1| |
| K273X4| Regent Pink Onyx Pop Up Knob| $107.00| $137.00
| K373X4| Regent Pink Onyx Pop Up Knob – Please use K360X4| |
| D100X1SET| Revere 1 Pair of Handles| $92.00| $102.00
| D200X3A| Revere Bottom Plate for High Spout| $86.00| $96.00
| D200X2| Revere Escutcheon Complete – Please use D100X2| |
| D100X2| Revere Escutcheon Complete – Please use K120X2| |
| D100X1| Revere Handle Complete| $76.00| $86.00
| D200X1| Revere Handle Complete – Please use D100X1| |
| D200X3| Revere High Spout Complete| $219.00| $243.00
| D200X4| Revere Pop Up Knob for High Spout| $87.00| $97.00
| D100X4| Revere Pop Up Knob for Low Spout| $88.00| $98.00
| D100X3| Revere Spout Complete| $218.00| $240.00
| K137X2| Ribbon & Reed Escutcheon Complete (Solid Finish Only)| $120.00|
$153.00
| K337X2| Ribbon & Reed Escutcheon Complete (Solid Finish Only) – Please use
K137X2| |
| K137SFX2| Ribbon & Reed Escutcheon Complete (Special Finish Only)| $220.00|
$300.00
| K337SFX2| Ribbon & Reed Escutcheon Complete (Special Finish Only) – Please
use K137SFX2| |
| K137X1| Ribbon & Reed Handle Complete (Solid Finish Only)| $122.00| $154.00
| K337X1| Ribbon & Reed Handle Complete (Solid Finish Only) – Please use
K137X1| |
| K137SFX1| Ribbon & Reed Handle Complete (Special Finish Only)| $159.00|
$230.00
| K337SFX1| Ribbon & Reed Handle Complete (Special Finish Only) – Please use
K137SFX1| |
| K337X3| Ribbon & Reed High Arc Lavatory Spout Complete (Solid Finish Only)|
$792.00| $1,003.00
| K337SFX3| Ribbon & Reed High Arch Lavatory Spout Complete (Special Finish
Only)| $792.00| $1,003.00
| K137X3| Ribbon & Reed Lavatory Low Spout Complete (Solid Finish Only)|
$550.00| $698.00
| K137SFX3| Ribbon & Reed Lavatory Low Spout Complete (Special Finish Only)|
$786.00|
| K137X4| Ribbon & Reed Pop Up Knob (Solid Finish Only)| $102.00| $129.00
| K337X4| Ribbon & Reed Pop Up Knob (Solid Finish Only) – Please use K137X4|
|
| K137SFX4| Ribbon & Reed Pop Up Knob (Special Finish Only)| $85.00|
| K337SFX4| Ribbon & Reed Pop Up Knob (Special Finish Only)| $67.00|
| D102X1SET| Savannah 1 Pair of Handles| $127.00| $141.00
| D102X1B| Savannah Button for Handle| $45.00| $51.00
| D102X2| Savannah Escutcheon Complete – Please use D100X2| |
---|---|---|---|---
| D202X2| Savannah Escutcheon Complete – Please use D100X2| |
| D202X1| Savannah Handle Complete – Please use D102X1SET| |
| D102X1L| Savannah Handle Left| $85.00| $95.00
| D102X1R| Savannah Handle Right| $85.00| $95.00
| D202X3| Savannah High Spout Complete – Please use D200X3| |
| D202X4| Savannah Pop Up Knob for High Spout – Please use D200X4| |
| D102X4| Savannah Pop Up Knob for Low Spout – Please use D100X4| |
| D102X1A| Savannah Screw for Handle| $9.00|
| D102X3| Savannah Spout Complete – Please Use D100X3| |
| M501SWAN| Swan Aerator| $60.00| $78.00
| K123X3A| Swan Bottom Plate for Lavatory Spout| $119.00| $152.00
| K183X3| Swan Cut Crystal – Please use K123X3| |
| K183X2| Swan Cut Crystal Escutcheon Complete – Please use K180X2| |
| K183X1| Swan Cut Crystal Handle Complete – Please use K180X1| |
| K183X4| Swan Cut Crystal Pop Up Knob – Please use K181X4| |
| K123X2| Swan Escutcheon Complete| $160.00| $205.00
| K123X1| Swan Handle Complete| $182.00| $231.00
| K123X3| Swan Lavatory Spout Complete| $700.00| $1,395.00
| K123X4| Swan Pop Up Knob| $100.00| $127.00
| K109X3A| Swing Bottom Plate for Lavatory Spout| $102.00| $130.00
| K109X2| Swing Escutcheon Complete| $125.00| $160.00
| K109X1| Swing Handle Complete| $118.00| $151.00
| K109X3| Swing Lavatory Spout Complete| $257.00| $326.00
| K109X4| Swing Pop Up Knob| $71.00| $93.00
| K338DX2| Valencia Beige Marble Escutcheon Complete| $141.00| $180.00
| K338DX2B| Valencia Beige Marble for Escutcheon| $79.00|
| K338DX1| Valencia Beige Marble Handle Complete| $146.00| $186.00
| K338DX3| Valencia Beige Marble Lavatory High Spout Complete – Please use
K360X3| |
| K338DX1A| Valencia Beige Marble Only for Handle| $55.00|
| K338DX4| Valencia Beige Marble Pop Up Knob – Please use K360X4| |
| K338CX2| Valencia Black Marble Escutcheon Complete| $141.00| $180.00
| K338CX2B| Valencia Black Marble for Escutcheon| $79.00|
| K338CX1| Valencia Black Marble Handle Complete| $146.00| $186.00
| K338CX3| Valencia Black Marble Lavatory High Spout Complete – Please use
K360X3| |
| K338CX1A| Valencia Black Marble Only for Handle| $47.00|
| K338CX4| Valencia Black Marble Pop Up Knob – Please use K360X4| |
| K338AX2| Valencia Gray Marble Escutcheon Complete| $159.00| $201.00
| K338AX2B| Valencia Gray Marble for Escutcheon| $79.00|
| K338AX1| Valencia Gray Marble Handle Complete| $154.00| $196.00
| K338AX3| Valencia Gray Marble Lavatory High Spout Complete – Please use
K360X3| |
| K338AX1A| Valencia Gray Marble Only for Handle| $47.00|
| K338AX4| Valencia Gray Marble Pop Up Knob – Please use K360X4| |
| K338FX2| Valencia Green Marble Escutcheon Complete| $159.00| $201.00
| K338FX2B| Valencia Green Marble for Escutcheon| $79.00|
| K338FX1| Valencia Green Marble Handle Complete| $154.00| $196.00
| K338FX3| Valencia Green Marble Lavatory High Spout Complete – Please use
K360X3| |
| K338FX1A| Valencia Green Marble Only for Handle| $47.00|
| K338FX4| Valencia Green Marble Pop Up Knob – Please use K360X4| |
| K338X1B| Valencia Marble Threaded Rod and End Cap for Handle| $47.00|
$62.00
K338BX2 | Valencia White Marble Escutcheon Complete | $141.00 | $180.00 | |
---|---|---|---|---|
K338BX2B | Valencia White Marble for Escutcheon | $79.00 | ||
K338BX1 | Valencia White Marble Handle Complete | $146.00 | $186.00 | |
K338BX3 | Valencia White Marble Lavatory High Spout Complete – Please use | |||
K360X3 | ||||
K338BX1A | Valencia White Marble Only for Handle | $47.00 | ||
K338BX4 | Valencia White Marble Pop Up Knob – Please use K360X4 | |||
K242X2 | Versailles Bleu Sodalite Escutcheon Complete | $382.00 | $485.00 | |
K332X2 | Versailles Bleu Sodalite Escutcheon Complete – – Please use K242X2 | |||
K332X3 | Versailles Bleu Sodalite Lavatory High Spout Complete – Please use | |||
K360X3 | ||||
K242X3 | Versailles Bleu Sodalite Lavatory Low Spout Complete – Please use | |||
K141X3 | ||||
K242X1 | Versailles Bleu Sodalite Lever Handle Complete | $271.00 | $343.00 | |
K332X1 | Versailles Bleu Sodalite Lever Handle Complete – Please use K242X1 | |||
K242X2B | Versailles Bleu Sodalite Only for Escutcheon | $310.00 | ||
K332X2B | Versailles Bleu Sodalite Only for Escutcheon – Please use K242X2B | |||
K242X1C | Versailles Bleu Sodalite Only for Handle | $225.00 | ||
K332X1C | Versailles Bleu Sodalite Only for Handle – Please use K242X1C | |||
K242X4 | Versailles Bleu Sodalite Pop Up Knob | $163.00 | $207.00 | |
K332X4 | Versailles Bleu Sodalite Pop Up Knob – Please use K360X4 | |||
K244X2 | Versailles Frienze Black Onyx Escutcheon Complete | $216.00 | $274.00 | |
K334X2 | Versailles Frienze Black Onyx Escutcheon Complete – Please use | |||
K244X2 | ||||
K334X3 | Versailles Frienze Black Onyx Lavatory High Spout Complete – Please | |||
use K360X3 | ||||
K244X3 | Versailles Frienze Black Onyx Lavatory Low Spout Complete – Please | |||
use K141X3 | ||||
K244X1 | Versailles Frienze Black Onyx Lever Handle Complete | $133.00 |
$169.00
| K334X1| Versailles Frienze Black Onyx Lever Handle Complete – Please use
K244X1| |
| K244X2B| Versailles Frienze Black Onyx Only for Escutcheon| $113.00|
| K334X2B| Versailles Frienze Black Onyx Only for Escutcheon – Please use
K244X2B| |
| K244X1C| Versailles Frienze Black Onyx Only for Handle| $93.00|
| K334X1C| Versailles Frienze Black Onyx Only for Handle – Please use
K244X1C| |
| K244X4| Versailles Frienze Black Onyx Pop Up Knob| $102.00| $129.00
| K334X4| Versailles Frienze Black Onyx Pop Up Knob – Please use K360X4| |
| K241X2| Versailles Montaione Brown Onyx Escutcheon Complete| $217.00|
$276.00
| K331X2| Versailles Montaione Brown Onyx Escutcheon Complete – Please use
K241X2| |
| K241X2B| Versailles Montaione Brown Onyx for Escutcheon| $139.00|
| K331X2B| Versailles Montaione Brown Onyx for Escutcheon – Please use
K241X2B| |
| K331X3| Versailles Montaione Brown Onyx Lavatory High Spout Complete –
Please use K360X3| |
| K241X3| Versailles Montaione Brown Onyx Lavatory Low Spout Complete –
Please use K141X3| |
| K241X1| Versailles Montaione Brown Onyx Lever Handle Complete| $146.00|
$186.00
| K331X1| Versailles Montaione Brown Onyx Lever Handle Complete – Please use
K241X1| |
| K241X1C| Versailles Montaione Brown Onyx Only for Handle| $113.00|
| K331X1C| Versailles Montaione Brown Onyx Only for Handle – Please use
K241X1C| |
| K241X4| Versailles Montaione Brown Onyx Pop Up Knob| $148.00| $189.00
| K331X4| Versailles Montaione Brown Onyx Pop Up Knob – Please use K360X4| |
| K240X2| Versailles Green Onyx Escutcheon Complete| $197.00| $251.00
| K330X2| Versailles Green Onyx Escutcheon Complete – Please use K240X2| |
| K240X2B| Versailles Green Onyx Insert for Escutcheon| $113.00|
| K330X2B| Versailles Green Onyx for Escutcheon – Please use K240X2B| |
| K330X3| Versailles Green Onyx Lavatory High Spout Complete – Please use
K360X3| |
| K240X3| Versailles Green Onyx Lavatory Low Spout Complete – Please use
K141X3| |
| K240X1| Versailles Green Onyx Lever Handle Complete| $126.00| $162.00
| K330X1| Versailles Green Onyx Lever Handle Complete – Please use K240X1| |
| K240X1C| Versailles Green Onyx Only for Handle| $93.00|
---|---|---|---|---
| K330X1C| Versailles Green Onyx Only for Handle – Please use K240X1C| |
| K240X4| Versailles Green Onyx Pop Up Knob| $102.00| $129.00
| K330X4| Versailles Green Onyx Pop Up Knob – Please use K360X4| |
| K243X2| Versailles Pink Onyx Escutcheon Complete| $216.00| $274.00
| K333X2| Versailles Pink Onyx Escutcheon Complete – Please use K243X2| |
| K333X3| Versailles Pink Onyx Lavatory High Spout Complete – Please use
K360X3| |
| K243X3| Versailles Pink Onyx Lavatory Low Spout Complete – Please use
K141X3| |
| K243X1| Versailles Pink Onyx Lever Handle Complete| $153.00| $195.00
| K333X1| Versailles Pink Onyx Lever Handle Complete – Please use K243X1| |
| K243X2B| Versailles Pink Onyx Only for Escutcheon| $130.00|
| K333X2B| Versailles Pink Onyx Only for Escutcheon – Please use K243X2B| |
| K243X1C| Versailles Pink Onyx Only for Handle| $93.00|
| K333X1C| Versailles Pink Onyx Only for Handle – Please use K243X1C| |
| K243X4| Versailles Pink Onyx Pop Up Knob| $171.00| $239.00
| K333X4| Versailles Pink Onyx Pop Up Knob – Please use K360X4| |
| K711BKX1| Waveland Complete Handle – Polished Black Nickel Accent| $313.00|
$438.00
| K711CRX1| Waveland Complete Handle – Polished Chrome Accent| $313.00|
$438.00
| K711SNX1| Waveland Complete Handle – Satin Nickel Accent| $309.00| $433.00
| K711BKX1A| Waveland Handle Assembly – Polished Black Nickel Accent|
$188.00| $263.00
| K711CRX1A| Waveland Handle Assembly – Polished Chrome Accent| $188.00|
$263.00
| K711SNX1A| Waveland Handle Assembly – Satin Nickel Accent| $183.00| $256.00
| K711X2| Waveland Handle Escutcheon Assembly| $157.00| $220.00
| K711X4| Waveland Pop Up Knob| $62.00| $93.00
| K711BKX3| Waveland Spout Complete – Polished Black Nickel Accent| $412.00|
$577.00
| K711CRX3| Waveland Spout Complete – Polished Chrome Accent| $412.00|
$577.00
| K711SNX3| Waveland Spout Complete – Satin Nickel Accent| $407.00| $570.00
| K392X2| Old Tyme Escutcheon Complete – Please use K120X2| |
| K393X2| Old Tyme Escutcheon Complete – Please use K120X2| |
| K392X1| Old Tyme Handle Complete – Please use K120AX1| |
| K393X1| Old Tyme Handle Complete – Please use K121AX1| |
| K392X3| Old Tyme Lavatory Spout Complete| $418.00| $529.00
| K393X3| Old Tyme Lavatory Spout Complete – Please use K392X3| |
| K211X2C| Charleston Bottom Plate for Escutcheon| $113.00| $144.00
| K341X2C| Charleston Bottom Plate for Escutcheon – Please use K211X2C| |
| K341X3| Charleston Lavatory High Spout Complete – Please use K360X3| |
| K211X3| Charleston Low Spout Complete – Please use K141X3| |
| K211X1B| Charleston Threaded Rod and End Cap for Handle| $113.00| $148.00
| K341X1B| Charleston Threaded Rod and End Cap for Handle – Please use
K211X1B| |
| K211X2A| Charleston Top Nut for Escutcheon| $47.00| $62.00
| K341X2A| Charleston Top Nut for Escutcheon – Please use K211X2A| |
| K211X2| Charleston White Porcelain Escutcheon Complete| $109.00| $139.00
| K341X2| Charleston White Porcelain Escutcheon Complete – Please use K211X2|
|
| K211X1| Charleston White Porcelain Handle Complete| $150.00| $191.00
| K341X1| Charleston White Porcelain Handle Complete – Please use K211X1| |
| K211X2B| Charleston White Porcelain Only for Escutcheon| $25.00|
| K341X2B| Charleston White Porcelain Only for Escutcheon – Please use
K211X2B| |
| K211X1A| Charleston White Porcelain Only for Handle| $20.00|
| K341X1A| Charleston White Porcelain Only for Handle – Please use K211X1A|
|
| K211X4| Charleston White Porcelain Pop Up Knob (No longer have this, out
of stock and no longer making this)| $68.00| $87.00
| K341X4| Charleston White Porcelain Pop Up Knob – Please use K360X4| |
---|---|---|---|---
| K161X1B| Colonial White Porcelain End Cap and Threaded Rod for Handle|
$65.00| $87.00
| K163X1B| Colonial White Porcelain End Cap and Threaded Rod for Handle –
Please use K161X1B| |
| K161X2| Colonial White Porcelain Escutcheon Complete – Please use K160X2|
|
| K163X2| Colonial White Porcelain Escutcheon Complete – Please use K160X2|
|
| K161X1| Colonial White Porcelain Handle Complete| $74.00| $93.00
| K163X1| Colonial White Porcelain Handle Complete – Please use K161X1| |
| K163X3| Colonial White Porcelain Lavatory High Spout Complete – Please use
K120X3| |
| K161X3| Colonial White Porcelain Lavatory Low Spout Complete – Please use
K160X3| |
| K161X1A| Colonial White Porcelain Lever Handle Insert Only| $25.00|
| K163X1A| Colonial White Porcelain Lever Handle – Please use K161X1A| |
| K163X4| Colonial White Porcelain Pop Up Knob – Please use K120X4| |
| K161X4| Colonial White Porcelain Pop Up Knob – Please use K160X4| |
| K191X2| Concord White Porcelain Escutcheon Complete – Please use K120X2| |
| K191X1| Concord White Porcelain Handle Complete – Please use K121X1 or
K121AX1| |
| K191X3| Concord White Porcelain Lavatory Spout Complete – Please use
K190X3| |
| K191X4| Concord White Porcelain Pop Up Knob – Please use K190X4| |
| K121X2| Europa Escutcheon Complete – Please use K120X2| |
| K121X1DIV| Europa Handle Complete: Blank| $92.00| $119.00
| K121X1CH| Europa Handle Complete: Chaud NOT AVAILABLE IN FRENCH (Please
use K121AX1HT for HOT)| $93.00| $120.00
| K121X1FD| Europa Handle Complete: Froid NOT AVAILABLE IN FRENCH (Please
use K121AX1CD for Cold)| $93.00| $120.00
| K121X4| Europa Pop Up Knob – Please use K120X4| |
| K121X3| Europa Spout Complete – Please use K120X3| |
| D223X1| Luna Cross Handle Complete| $101.00| $112.00
| D222X2| Luna Escutcheon Complete| $116.00| $128.00
| D223X2| Luna Escutcheon Complete – Please use D222X2| |
| D222X1| Luna Lever Handle Complete| $107.00| $119.00
| D222X4| Luna Pop Up Knob – Please use D220X4| |
| D223X4| Luna Pop Up Knob – Please use D220X4| |
| D222X3| Luna Spout Complete| $428.00| $471.00
| D223X3| Luna Spout Complete – Please use D222X3| |
| K110X3A| Melon Bottom Plate for Lavatory Spout| $102.00| $130.00
| K110X2| Melon Escutcheon Complete| $125.00| $160.00
| K110X1| Melon Handle Complete| $130.00| $165.00
| K110X3| Melon Lavatory Spout Complete| $257.00| $326.00
| K110X4| Melon Pop Up Knob| $54.00| $69.00
| K230X2| Mirabella Black Porcelain Escutcheon Complete| $104.00| $133.00
| K310X2| Mirabella Black Porcelain Escutcheon Complete – Please use K230X2|
|
| K230X2B| Mirabella Black Porcelain for Escutcheon| $24.00|
| K310X2B| Mirabella Black Porcelain for Escutcheon – Please use K230X2B| |
| K230X1| Mirabella Black Porcelain Handle Complete| $135.00| $172.00
| K310X1| Mirabella Black Porcelain Handle Complete – Please use K230X1| |
| K230X1A| Mirabella Black Porcelain Only for Handle| $26.00|
| K310X1A| Mirabella Black Porcelain Only for Handle – Please use K230X1A| |
| K230X4| Mirabella Black Porcelain Pop Up Knob| $63.00| $81.00
| K310X4| Mirabella Black Porcelain Pop Up Knob – Please use K360X4| |
| K230X1B| Mirabella Black Threaded Rod and End Cap for Handle| $50.00|
$66.00
| K310X1B| Mirabella Black Threaded Rod and End Cap for Handle – Please use
K230X1B| |
| K231X2| Mirabella White Porcelain Escutcheon Complete| $99.00| $126.00
| K311X2| Mirabella White Porcelain Escutcheon Complete – Please use K231X2|
|
| K231X1| Mirabella White Porcelain Handle Complete| $127.00| $163.00
---|---|---|---|---
| K311X1| Mirabella White Porcelain Handle Complete – Pease use K231X1| |
| K311X3| Mirabella White Porcelain Lavatory High Spout Complete – Please use
K360X3| |
| K231X3| Mirabella White Porcelain Lavatory Low Spout – Please use K141X3|
|
| K231X2B| Mirabella White Porcelain Only for Escutcheon| $21.00|
| K311X2B| Mirabella White Porcelain Only for Escutcheon – Please use K231X2|
|
| K231X1A| Mirabella White Porcelain Only for Handle (DISCONTINUED, NO
LONGER AVAILABLE)| $23.00|
| K311X1A| Mirabella White Porcelain Only for Handle – Please use K231X1A| |
| K231X4| Mirabella White Porcelain Pop Up Knob| $62.00| $79.00
| K311X4| Mirabella White Porcelain Pop Up Knob – Please use K360X4| |
| D111X1SET| Saratoga 1 Pair of Handles| $104.00| $116.00
| D211X2| Saratoga Escutcheon Complete – Please use D100X2| |
| D111X2| Saratoga Escutcheon Complete Please use D100X2| |
| D111X1| Saratoga Handle Complete| $110.00| $123.00
| D211X1| Saratoga Handle Complete – Please use D111X1| |
| D111X1M| Saratoga Handle Complete Less Porcelain| $88.00| $97.00
| D211X4| Saratoga Pop Up Knob for High Spout – Please use D200X4| |
| D111X4| Saratoga Pop Up Knob for Low Spout – Please use D100X4| |
| D111X1A| Saratoga Porcelain for Handle| $22.00|
| D111X3| Saratoga Spout Complete – Please use D100X3| |
| D211X3| Saratoga Spout Complete – Please use D200X3| |
| D221X1| Skyla Cross Handle Complete| $100.00| $110.00
| D220X2| Skyla Escutcheon Complete| $116.00| $128.00
| D221X2| Skyla Escutcheon Complete| $116.00| $128.00
| D220X1| Skyla Lever Handle Complete| $108.00| $120.00
| D220X4| Skyla Pop Up Knob| $87.00| $97.00
| D221X4| Skyla Pop Up Knob – Please use D220X4| |
| D220X3| Skyla Spout Complete| $428.00| $473.00
| D221X3| Skyla Spout Complete – Please use D220X3| |
| K251X1| Victoria White Porcelain Lever Handle Complete – Please use K161X1|
|
| K251X2C| Victorian Bottom Plate for Escutcheon| $105.00| $133.00
| K251X2A| Victorian Top Nut for Escutcheon| $47.00| $62.00
| K261X2C| Victorian White Porcelain Bottom Plate for Escutcheon – Please use
K251X2C| |
| K251X2| Victorian White Porcelain Escutcheon Complete| $106.00| $135.00
| K261X2| Victorian White Porcelain Escutcheon Complete – Please use K251X2|
|
| K251X3| Victorian White Porcelain Lavatory High Spout Complete – Please use
K120X3| |
| K261X3| Victorian White Porcelain Lavatory Low Spout Complete – Please use
K160X3| |
| K261X1| Victorian White Porcelain Lever Handle Complete – Please use
K161X1| |
| K251X4| Victorian White Porcelain Pop Up Knob – Please use K120X4| |
| K261X4| Victorian White Porcelain Pop Up Knob – Please use K160X4| |
| K261X2A| Victorian White Porcelain Top Nut for Escutcheon – Please use
K251X2A| |
| K291X2| Williamsburg White Porcelain Escutcheon Complete – Please use
K251X2| |
| K291X1| Williamsburg White Porcelain Handle Complete – Please use K121X1CH
or K121X1FD| |
| K291X3| Williamsburg White Porcelain Lavatory Low Spout Complete – Please
use K160X3| |
| K291X4| Williamsburg White Porcelain Pop Up Knob – Please use K160X4| |
| P03013| Beaded Lav Spout Base (used on K141, K360, K234, K314, K270-4,
K370-4, K181, K280, K137, K337, K338, K240-4, K330-4)| $60.00| $120.00
| Wall Lavatory: Parts (Please specify finish)
| | | |
| DWL100X3| Wall Lavatory Spout Only| $122.00| $134.00
| DWL130X3| Basic Wall Lavatory Spout Only| $154.00| $170.00
| DWL130X3A| Basic Wall Lavatory Spout Base Only| $38.00| $41.00
---|---|---|---|---
| M501DWL| Wall Lavatory Aerator, Washer and Housing (Please specify
finish.)| $20.00| $23.00
| MWL130| Basic Wall Lavatory Aerator and Key| $16.00|
3-414/| | Basic Series Wall Lav Spout 7 1/2″ complete| $219.00| $345.00
3-415| | Basic Series Wall Lav Spout 10″ complete| $274.00| $548.00
3-416| | Basic Series Wall Lav Spout 12″ complete| $294.00| $588.00
3-417| | Basic Series Wall Lav Spout 14″ complete| $314.00| $628.00
| WL104X3| Amphora Wall Lavatory Spout Complete| $550.00| $905.00
| WL109X3| Swing Wall Lavatory Spout Complete| $258.00| $328.00
| WL111X7| Harper Wall Lavatory Spout Hardware| $149.00|
| WL111X7A| Harper Wall Lavatory Spout Mount Plate Hardware| $75.00|
| WL111X7B| Harper Wall Lavatory Spout Wall Hardware| $108.00|
3-325/| | Henri Series Wall Lav Spout| $225.00| $500.00
3-146/| | Hex Series Wall Lav Spout| $275.00| $450.00
| WL141X3| Georgian Wall Lavatory Spout Complete| $647.00| $834.00
| WL160X3| Georgetown Wall Lavatory Spout Complete (DISCONTINUED, NO LONGER
AVAILABLE)| $419.00| $530.00
| WL170X3| Le Verre / La Crosse Wall Lavatory Spout Complete (DISCONTINUED,
NO LONGER AVAILABLE)| $502.00| $636.00
3-118/| | Mix Series Wall Lav Spout| $250.00| $500.00
3-126/| | Stria Series Wall Lav Spout| $275.00| $550.00
| WL711X3| Waveland Wall Lavatory Spout| |
| WL811X3| Fillmore Wall Lavatory Spout| |
| EXTWALL65| Broached Wall Extension Stem, 6″ w/ Nipple and Secure Nut (used
to extend old VB1001’s tip-tip 7 1/2″| $49.00|
| VB1001CNL| 1/2″ Cartridge Only for Cold Lever Valves (used 1991- January
2014)| $38.00|
| VB1001HNL| 1/2″ Cartridge Only for Hot Lever, Hot Round and Cold Round
Valves (used 1991- January 2014)| $38.00|
| 10497| 1/2″ Cartridge, Hot, Torque-able, adjustable leveling (Exacto)|
$55.00|
| 10498| 1/2″ Cartridge, Cold, Torque-able, adjustable leveling (Exacto)|
$55.00|
| P29040| HOT ½” ceramic disc made in 1 piece w/ a 16PT broached surface of
3-3/4”, tip-tip is 6″ long (1/14-current)| $50.00|
| P29041| COLD ½” ceramic disc made in 1 piece w/ a 16PT broached surface of
3-3/4” tip-tip is 6″ long (1/14-current)| $50.00|
| Wall Tub Sets: Common Parts
| 1549CEXT| Extended Compression Cold Stem & Bonnet Assembly (Turns Clock
Wise for On)| $105.00|
| | (Please Specify Exact Amount to be Shortened or Extended, Maximum
1-3/4″)| |
| 1549HEXT| Extended Compression Cold Stem & Bonnet Assembly (Turns Clock
Counter Wise for On)| $105.00|
| | (Please Specify Exact Amount to be Shortened or Extended, Maximum
1-3/4″)| |
| 1549CSB| Compression Cold Stem and Bonnet Assembly (Turns Clock Wise for
On)| $95.00|
| 1549HSB| Compression Hot Stem and Bonnet Assembly (Turns Counter Clock Wise
for On)| $95.00|
| M501DWTUB| Deck and Wall Tub Aerator – Can be used for Revere, Savannah,
Normandy, 3Ring| $16.00|
| SEATWASHKIT| Seat Washer Kit for Compression Valve (contains 263B_001,
814G, 900, 1028Y)| $15.00|
| EXTWALL65| Broached Wall Extension Stem, 6″ w/ Nipple and Secure Nut (used
to extend old VB1001’s tip-tip 7 1/2″| $49.00|
| 2-197| 1/2″ Ceramic Cold Cartridge with Stem Kit (used 1991-January 2014)|
$72.00|
| 2-198| 1/2″ Ceramic Hot Cartridge with Stem Kit (used 1991-January 2014)|
$72.00|
| VB1001CNL| 1/2″ Cartridge Only for Cold Lever Valves (used 1991-January
2014)| $32.00|
| VB1001HNL| 1/2″ Cartridge Only for Hot Lever, Hot Round and Cold Round
Valves (used 1991-January 2014)| $32.00|
| P29040| HOT ½” ceramic disc made in 1 piece w/ a 16PT broached surface of
3-3/4”, tip-tip is 6″ long (1/14-Current)| $50.00|
| P29041| COLD ½” ceramic disc made in 1 piece w/ a 16PT broached surface of
3-3/4” tip-tip is 6″ long (1/14-Current)| $50.00|
| Wall Tub: Trim Parts (Please specify finish)
| D1100X3A| Wall Tub Spout Base| $32.00| $35.00
| D1130X3A| Basic Wall Tub Spout Base| $104.00| $117.00
| D1205X3A| 3Ring Wall Tub Spout Base| $90.00| $104.00
D1220X3A | Skyla Wall Tub Spout Base | $69.00 | $78.00 | |
---|---|---|---|---|
D1222X3A | Luna Wall Tub Spout Base | $69.00 | $78.00 | |
K1101X1L | Dolphin Wall Tub Left Handle | $219.00 | $278.00 | |
K1101X1R | Dolphin Wall Tub Right Handle | $219.00 | $278.00 | |
K1101X2 | Dolphin Escutcheon for Wall Tub | $155.00 | $197.00 | |
K1110X3A | Base Plate for Wall Spout | $80.00 | $102.00 | |
K1120X3 | Carrara Wall Tub Spout | $250.00 | $425.00 | |
K1123X3A | Swan Base Plate for Wall Tub Spout | $119.00 | $152.00 | |
K1137SFX3 | Ribbon & Reed Wall Tub Spout, SF Finish | $986.00 | ||
K1137SFX3A | Base Plate for Ribbon & Reed Wall Tub Spout (Special Finish | |||
Only) | $151.00 | |||
K1137X3A | Base Plate for Ribbon & Reed Wall Tub Spout | $101.00 | $129.00 | |
3-127/ | Stria Series Wall Tub Spout | $275.00 | $550.00 | |
3-124/ | Mix Series Wall Tub Spout | $250.00 | $500.00 | |
3-147/ | Hex Series Wall Tub Spout | $275.00 | $550.00 | |
3-390/ | Henri Series Wall Tub Spout | $225.00 | $500.00 | |
P05003/ | Aerator for Deck & Wall Spout | $86.00 | $112.00 | |
**Column1 |
Column2
Column3
Column4
| Deck Tub Sets: Common Parts – Shipped starting from 1991 to current**
| 34412DTN| 3/4″ Deck Tub Nipple , Nut & Washer, Less Snap on Adapter (Part
: 4614146)| $32.00|
| P28025| 3/4″ Tee for Deck Tub Spouts| $32.00|
| 4614146| 3/4″ Snap-On Adapter for All Deck Tub Spouts, Except K5144
Baroque, Harper| $55.00|
2-187| | Quick Connect Kit with Nipple| $100.00|
| DSK1| 2″ EXT. Deck Stem Kit for Deck Diverter with Nipple (1991-March
2013)| $18.00|
| DSK2| 2″ EXT. Deck Stem Kit, 2 Stems Hot and Cold (1991-March 2013)|
$28.00|
| DSK3| 2″ EXT. Deck Stem Kit, 3 Stems Hot, Cold and Diverter (1991-March
2013)| $40.00|
| EXTDK0203| Finished All Broached Deck Extension Stem, 4″, w/ Nipple & Screw
(Trim to Fit)| $24.00|
| M501DWTUB| Deck and Wall Tub Aerator – Can be used for Revere, Savannah,
Normandy, 3Ring, Ribbon & Reed, Georgian, Dolphin| $16.00|
| VAL3PD02| Cartridge for Push Pull Diverter, Used for 80001526 , 80001249
(2000-August 2013)| $192.00|
10464| | Diverter Cartridge – rotates (August 2013-Current)| $90.00|
| VAL3PD06| Bottom Lock Nut for Push-Pull Cartridge| $41.00|
| VALADT58| Nipple Adapter for Screwless Stems, comes with stem| $13.00|
| VA2001C| Cold Deck Valve for Lever Handle Sets, (Cartridge has a notched
broach)| $130.00|
| VA2001H| Hot Deck Valve for Lever Handle Sets & Hot & Cold Valve for Round
Handle Sets| $130.00|
| 10214 (20 PT)| (Formerly VB2000C) Cold Deck 3/4″ Cartridge for Lever Handle
Sets, 20 point stems (1991-March 2013)| $47.00|
| 10215 (20 PT)| (Formerly VB2000H) Hot Wall/Deck 3/4″ Cartridge Only for
Hot Valves, 20 point stems (1991-March 2013)| $47.00|
| 10239 (16 PT)| (Formerly VB2000C) Cold Wall/Deck 3/4″ Cartridge for
Lever Handle Sets, 16 point stems (March 2013-current)| $47.00|
| 10240 (16 PT)| (Formerly VB2000H) Hot Deck 3/4″ Cartridge Only for Hot
Valves, 16 point stems (March 2013-current)| $47.00|
| VB25004| Escutcheon Nipple Adapter| $28.00|
| VB1800-SUB-1| Diverter Cartridge for 4/Port Deck – rotates (1991-2000)|
$195.00|
| K6100X5HP| Stainless Steel, High Pressure 36″ Hose, 1/2″ female x 1/2″
male, for Deck Hand Shower| $23.00|
| P18002| Hand Shower Deck Mount Rough in Kit for 80001249 95-Current|
$45.00|
| Deck Tub Sets: Common Parts Shipped before 1991
| 1248CSB (5″)| Cold Deck Stem & Bonnet Assembly, Complete(Turns on Counter-
Clockwise,turns more than 1/4 of a turn for on)| $95.00| in stock
| 1248HSB (5″)| Hot Deck Stem and Bonnet Assembly, Complete (Turns on
Clockwise, turns more than 1/4 of a turn for on)| $95.00| in stock
| 1248CSBEXT (7″)| Cold Deck Stem & Bonnet Assembly, Complete(Turns on
Counter-Clockwise, turns more than 1/4 of a turn for on)| $76.00|
| | (Please Specify Exact Amount to be Shortened or Extended, 1-3/4″ Maximum
Extension)| |
| 1248HSBEXT (7″)| Hot Deck Stem and Bonnet Assembly, Complete (Turns on
Clockwise, turns more than 1/4 of a turn for on)| $76.00|
| | (Please Specify Exact Amount to be Shortened or Extended, 1-3/4″ Maximum
Extension)| |
---|---|---|---|---
| 1526DSB| Deck Diverter Stem and Bonnet Assembly Complete| $140.00|
| | (Please Specify Exact Amount to be Shortened or Extended, 1-3/4″ Maximum
Extension)| |
| 1526DSBEXT| Extended Deck Diverter Stem and Bonnet Assembly Complete
( DO NOT HAVE EXT VERSION)| $99.00|
| | (Please Specify Exact Amount to be Shortened or Extended, 1-3/4″ Maximum
Extension)| |
| 34412DTN| 3/4″ Deck Tub Nipple , Nut & Washer, Less Snap on Adapter (Part
: 4614146)| $32.00|
| 4614146| 3/4″ Snap-On Adapter for All Deck Tub Spouts, Except K5144|
$55.00|
3-099/| | DECK TUB SPOUT ONLY (MIX)| $450.00| $900.00
3-144/| | DECK TUB SPOUT ONLY (HEX, LE VERRE, LA CROSSE)| $460.00| $993.00
| DECKWASHKIT| Compression Deck Valve Washer Kit (contains 1656500_001, 105,
26911/8, 402A, 814G & 913)| $16.00|
| EXTDK0203| Finished All Broached Deck Extension Stem, 3.675″, w/Nipple &
Screw (Trim to Fit)| $24.00|
| | | $45.00|
| Deck Tub Spouts: Common Parts
| 34412DTN| 3/4″ Deck Tub Nipple , Nut & Washer, Less Snap on Adapter (Part
: 4614146)| $32.00|
| 4614146| 3/4″ Snap-On Adapter for All Deck Tub Spouts, Except K5144|
$55.00|
| DECKWASHKIT| Compression Deck Valve Washer Kit – (contains 1656500_001,
105, 26911/8, 402A, 814G & 913)| $16.00|
| P35050| 3/4″ DECK TUB METAL MOUNTING NUTS (USED FOR HARPER, BASIC & 3RING
INSTEAD OF PLASTIC NUTS)| |
| Deck Tub: Trim Parts (Please specify finish)
| D5205X3A| 3 Ring Deck Spout Base| $253.00| $279.00
3-394/| | Basic II Tub spout (will need Tee Assy, Deck Tub Nipple, Nut ,
Washer, Snap On Adapter)| $299.00| $479.00
4-025/| | Hand Shower Deck Tub Trim Kit (Round)| $380.00| $700.00
| K1111LX7| Harper Deck Tub Hardware| $161.00|
| K5120X3A| Deck Spout Base Ring (Please specify finish.)| $105.00| $135.00
| K2111L1X1| Harper Cylinder Complete Diverter Handle| $247.00| $207.00
| M1130| Basic Deck Tub Spout Aerator and Key| $16.00|
| M1220| Skyla Deck Tub Spout Aerator| $39.00| $43.00
| 11107 & 11108| Basic Larger Deck Tub Cylinder Escutcheon and Base| $49.00|
$98.00
| 3/4″ Thermostat: Common Parts
| | | |
| EXTTHERM| 1-1/2″ Kit for Therm Valve (old therm. used till January 17,
2013)| $151.00|
| P37039XX| Harper Thermostat Gasket| $42.00|
| P38003XX| Set Screw for Thermostat| $34.00|
| ZIPXCART| Replacement cartridge (2000-January 17, 2013)| $175.00|
| ZIPXREVCART| Reverse Replacement cartridge| $462.00|
10308| VERXCART (20pt)| Replacement 20 point stem cartridge (September 7,
2013-current) (NOW 2-181)| $79.00|
| VERXCART (32pt)| Replacemnt 32 point stem cartridge (January 16 – September
6, 2013)| $79.00|
| 10209 & 10631| Replacement stem extension (January 17-October 15, 2013)
Shank, Nipple, Thread All 9/16″-20UN, Stem 16-32PT| $29.00|
| 2-089| 4″ Stem Extension, 20-16PT Extension Kit (October 15, 2013-current)|
$29.00|
| 2-089-6| 6″ Stem Extension, 20-16PT Extension Kit (October 15,
2013-current)| $55.00|
| 1-002| Check Valve – kit of 2 (January 17, 2013-current)| $50.00|
10625| | Mini Therm Cartridge| $75.00|
2-181| | Repair Kit for 3/4″ Therm (Cartridge, Stem kit, Mechanical Stop,
Retainer sleeve, Ret nuts)| $125.00|
2-173| | Repair Kit for Mini Therm (Cartridge, Stem kit, Mechanical Stop,
Retainer sleeve, Ret nuts)| $100.00|
| 3/4″ Thermostat: Trim Parts (Please specify finish)
| D220X21| Skyla Lever Handle for Thermostat and Pressure Balance| $108.00|
$120.00
| D221X21| Skyla Cross Handle for Thermostat and Pressure Balance| $114.00|
$127.00
| D222X21| Luna Lever Handle for Thermostat and Pressure Balance| $107.00|
$119.00
| D223X21| Luna Cross Handle for Thermostat and Pressure Balance| $120.00|
$132.00
---|---|---|---|---
| DTH130X2| Basic Series Thermostat Plate and Sleeve| $149.00| $165.00
| DTHX2| Oval Shaped Thermostat Plate (old therm. used till January 17,
2013)| $130.00| $144.00
| TH104ESC| Amphora Escutcheon Plate| $168.00| $214.00
| TH111X1A| Harper Thermostat Handle Assembly| $337.00| $297.00
| DTHX1| Thermostat Handle with Temperature (handle base w/ plastic dial)|
$125.00| $138.00
| THX10203| Handle Base with Temperature Scale (Please specify finish)|
$209.00| $266.00
| THX1HS| Handle Screw for Handle Base| $4.00|
| THX1STEM0203| Handle Base Stem Only (Please specify finish)| $46.00| $59.00
| THX20203| Oval Escutcheon Plate (Please specify finish)| $331.00| $418.00
| THX2B0203| Escutcheon Mounting Sub Plate| $50.00|
| THX2HW| Thermostat Hardware| $40.00|
| THXPERING| Plastic Escutcheon Plate Ring| $12.00|
| THXCV| Check Valve – kit of 2 (2000-January 17, 2013)| $74.00|
| THXPC| Zipone T/S Valve Pos Cam| $25.00|
| THXMS| Mounting Screws (4 Required)| $4.00|
| THXVS| Valve Sleeve (Please specify finish)| $105.00| $135.00
| THXSS| Zipone T/S Valve Safety Stop| $26.00|
| P20004| Gasket for Therm Plate| |
| P20009| Stem for Therm Handle| $15.00|
| P20013| Spring for Red Button for Therm| $12.00|
| P20011| Black Plastic Ring w/ Temperature Scale for Thermostat| $22.00|
| P20012| Red Button for Thermostat| $12.00|
| P38003| Hex Screw for Thermostat Handle| $2.00|
| P39001| Allen Ranch| $3.00|
| | | |
| 2PV, In-Line Stop Valve 1/2″ and 3/4″: Common Parts
| WALLSTEM| Stem, Nipple, Nut Kit for Wall Valve| $30.00|
| EXTWALL65| Finished All Broached Wall Escutcheon Stem, 6″ with Nipple
Extension| $49.00|
| VALABS35| 3.5″ All Broach Screwless Stem| $24.00|
10257| VB1001CNL| 1/2″ Cartridge Only for Cold Lever Valves (80607PHY 1/2″
VALVE) Cold Cartridge for all Single Hole Bar Faucets| $32.00|
| VB1001HNL| 1/2″ Cartridge Only for Hot Lever Valves (80607PHY 1/2″ VALVE)
Hot Cartridge for all Single Hole Bar Faucets| $32.00|
| 10214 (20 PT)| Formerly VB2000C (20PT) 3/4″ Cartridge Only for Cold Lever
Valves (80002125 3/4″ valves can only use 20PT carts)| $47.00|
| 10215 (20 PT)| Formerly VB2000H (20PT) 3/4″ Cartridge Only for Hot Lever
Valves (80002125 3/4″ valves can only use 20PT carts)| $47.00|
| VB25004| Escutcheon Nipple Adaptor| $28.00|
| | | |
| 3PV, In-Line Diverter Valve: Common Parts
| EXTWALL65| All Broached Wall Escutcheon Stem, 6″ with Nipple Extension|
$49.00|
| VALABS35| 3.5″ All Broach Screwless Stem| $24.00|
| VALADT58| Nipple Adapter for Screwless Stems| $13.00|
| VALAT58| All Thread Nipple for Screwless Wall Stems| $20.00|
| VALHN58| Holding Nut for Thread Nipple with Stems| $6.00|
| VALWD3P02| 3 Port Wall Diverter Replacement Cartridge (2002- Nov 2012)|
$198.00|
| 10350| Motion 33 Diverter Cartridge used for 80001820 (Nov 2012-current)
NOT DFPHYID| $22.49|
11297| | CARTRIDGE WALL DIV. NON SHARING| $27.00|
| VB1850| Diverter cartridge for 3 PV handles tub & Shower (Before
1999-2002)| $120.00|
| VALWD4P| Replacement Diverter for Tub and Shower (80951PHY)| $125.00|
| WALLSTEM| Stem, Nipple, Nut Kit for Wall Valve| $30.00|
| | | |
---|---|---|---|---
| 5PV, Port Diverter Valves, Deck and Wall: Common Parts
| EXTDK0203| Screwless 4″ Extension with Nipple for Deck Valve| $24.00|
| EXTWALL65| Finished All Broached Wall Escutcheon Stem, 6″ with Nipple
Extension| $49.00|
| VALABS35| 3.5″ All Broach Screwless Stem| $24.00|
| VALADT58| Nipple Adapter for Screwless Stems| $13.00|
| VALAT58| All Thread Nipple for Screwless Wall Stems| $20.00|
| VB1820SUB1| Diverter cartridge for 80001820 wall mounted 5 port diverter
valve (1990-1998)| $74.00|
| VALD5PD02| 5 Port Deck Diverter Replacement Cartridge| $131.00|
| VALWD5P| 5 Port Wall Diverter Replacement Cartridge| $41.00|
| WALLSTEM| Stem, Nipple, Nut Kit for Wall Valve| $30.00|
| MISC IW| stem extension with screw| $10.00|
| | | |
| Three Handle Tub & Shower Sets: Common Parts – Shipped starting from
December 1989 to 1990
| 1549CSB| Compression Cold Stem and Bonnet Assembly (Turns Clock Wise for
On)| $56.00|
| 1549HSB| Compression Hot Stem & Bonnet Assembly (Turns Counter Clock Wise
for On)| $56.00|
| 1549CEXT| Extended Compression Cold Stem and Bonnet Assembly (Turns Clock
Wise for On)| $95.00|
| | Please Specify Exact Amount to be Shortened or Extended, Maximum
1-3/4″.| |
| 1549HEXT| Extended Compression Hot Stem and Bonnet Assembly (Turns Counter
Clock Wise for On)| $95.00|
| | Please Specify Exact Amount to be – Shortened or Extended, Maximum
1-3/4″| |
| TUBWASHKIT| Washer Kit (contains 105, 263B_001, 900, and 814G)| |
| D951SB| Diverter Stem & Bonnet for Compression (prior to1989)| $120.00|
| 416821| 1/2″ Cold Central Brass Ceramic Shower Cartridge 1989-1991 – Stem &
Bonnet – 5 1/4″ in length| $110.00|
| 416822| 1/2″ Hot Central Brass Ceramic Shower Cartridge 1989-1991 – Stem &
Bonnet- 5 1/4″ in length| $110.00|
| 468101| 1/2″Cold Central Brass Ceramic Shower Cartridge 1989-1991 – Stem &
Bonnet (TOO LONG) (CLOCKWISE)| $100.00|
| 468102| 1/2″ Hot Central Brass Ceramic Shower Cartridge 1989-1991 – Stem &
Bonnet (TOO LONG) (COUNTERCLOCKWISE)| $100.00|
| | | |
| Three Handle Tub & Shower Sets: Common Parts – Common Parts Shipped
after 1991
| EXTWALL65| Finished All Broached Wall Extension Stem, 6″ with Nipple and
Screw| $49.00|
| VB1001HNL| 1/2″ Cartridge Only for Hot Lever, Hot Round and Cold Round
Valves| $38.00|
| VB1001CNL| 1/2″ Cartridge Only for Cold Lever Valves| $38.00|
| VB25004| Escutcheon Nipple Adaptor| $28.00|
| WALLSTEM| Stem, Nipple, Nut Kit for Wall Valve| $30.00|
| | | |
| Three Handle Tub & Shower Sets: Common Parts
| D2100X21| Wall Diverter Handle Complete (Can Be Used For All Series Except
Basic)| $83.00| $91.00
| D2130X21| Basic Series Wall Diverter Handle Complete – Please use D134X1|
|
| K2101X21| Wall Diverter Handle Complete, Dolphin Collection| $218.00|
$277.00
| | Wall Diverter Handle Complete, Swan Collection, Please use K2144X21| |
| K2137X22| Wall Diverter Escutcheon Complete, Ribbon & Reed Collection
(Solid Finish Only), Please use K137X2| |
| K2144X21| Wall Diverter, Handle complete Baroque| $218.00| $277.00
| K2158X21| Wall Diverter Handle Complete, Carrara Collection, Please use
K2160X21| |
| K2161X21| Wall Diverter Handle Complete, Colonial Collection, Please use
K121X1DIV| |
| K2211X21| Wall Diverter Handle Complete, Charleston White Porcelain
Collection, Please use K121X1DIV| |
| | | |
| Two Handle Shower Sets: Common Parts Shipped 1970-1989
---|---
| 1549CEXT(6 3/4″)| Extended Compression Cold Stem and Bonnet Assembly (Turns
Clock Wise for On)| $95.00|
| | Please Specify Exact Amount to be Shortened or Extended, Maximum
1-3/4″.| |
| 1549CSB (5″)| Compression Cold Stem and Bonnet Assembly (Turns Clock Wise
for On)| $56.00|
| 1549HEXT(6 3/4″)| Extended Compression Hot Stem and Bonnet Assembly (Turns
Counter Clock Wise for On)| $95.00|
| | Please Specify Exact Amount to be Shortened or Extended, Maximum
1-3/4″.| |
| 1549HSB (5″)| Compression Hot Stem & Bonnet Assembly (Turns Counter Clock
Wise for On)| $56.00|
| DECKWASHKIT| Compression Deck Valve Washer Kit (contains 1656500_001, 105,
26911/8, 402A, 814G and 913)| $16.00|
| SEATWASHKIT| Seat Washer Kit for Compression Valve (contains 263B_001,
814G, 900, 1028Y)| $15.00|
| | | |
| Two Handle Shower Sets: Common Parts Shipped after 1991
| EXTWALL65| Finished All Broached Wall Escutcheon Stem, 6″ with Nipple
Extension| $49.00|
| VB1001HNL| 1/2″ Cartridge Only for Hot Lever Valves| $32.00|
| VB1001CNL| 1/2″ Cartridge Only for Cold Lever Valves| $32.00|
| VB25004| Escutcheon Nipple Adaptor| $28.00|
| | | |
| Pressure Balance Tub & Shower: Common Parts – (Trim and Rough) Shipped
from 2000 to current
|
| 062N1207| Extension Kit with 1/2″ & 3/4″ Extensions (May be Stacked for
1-1/4″ Extension)| $21.00|
| 062N1232| Replacement driver assembly w/ screw| $13.00|
| 062N1253| Escutcheon Component Kit for Finished Face Plate (before 2000)|
$50.00|
| 062N1285| Replacement Cartridge Assembly with two O Rings, (Before 2000)|
$103.00|
| | Shipped prior to March 2000 – corresponds with valve with Phylrich on
cover and color of cartridge is black| |
| 062N1285EF| Replacement Cartridge Assembly with two O Rings, (after
2000-2010)| $113.00|
| | Shipped after March 2000 – corresponds with valve with Phylrich on cover
and color of cartridge is gray| |
| 062N2010| Replacement Cartridge Assembly with O Ring – Shipped after April
2010 -January 16, 2013| $142.00|
| 1-118| diverter Assembly for DFPHYID from January 2013-now| $32.00|
| 10551| Replacement PB Cartridge January 17, 2013- current| $55.00|
| DPBXEXT| 5″ Extension Stem and Nipple for DFPHYID valve (suggested when
using old PB valve 00-13 & new trim)| $27.00|
| EXTWALL65| Finished All Broached Wall Escutcheon Stem, 6″ with Nipple
Extension| $49.00|
| 2-089| 4″ Stem Extension, 20-16PT Extension Kit (January 17, 2013-current)
used for DFPHY/ID| $29.00|
| P30118X| Extension Kit for DFPHYID, which needs to be ordered when trim is
being replaced,| $27.00| $41.00
| | if valve shipped prior to April 2010 ( Please specify finish)| |
| P37036XX| Harper Pressure Balance Plate Back (large) Gasket| $47.00|
| P37047XX| Harper Pressure Balance Plate Front (small) O-ring| $34.00|
| PBX2AL| Long Secure Nut (Please specify finish.)| $48.00| $62.00
| PBX2AS| Short Secure Nut (Please specify finish.)| $49.00| $64.00
| PBX2B| Beaded Plate (Please specify finish.)| $323.00| $411.00
| PBX2BSF| Beaded Plate with Secure Nut Special Finish (Please specify
finish.)| $463.00|
| PBX2H| Hex Plate with Secure Nut (Please specify finish.)| $323.00| $411.00
| PBX2S| Smooth Plate with Secure Nut (Please specify finish.)| $323.00|
$411.00
| PBX40| Short Valve Cover without O-Ring| $79.00|
| PBX50| Valve Adapter Assembly| $98.00|
| PBX60| 3.5″ Stem Assembly| $24.00|
| PB2104X1A| Amphora Pressure Balance Secure Nut| $51.00| $66.00
| 11085| Extension Pin for PB| $15.00|
| 11007| Extension Pin for PB 1.25″| $30.00|
| 11296| Temperature Limit Stop for PB, Mini Therm & 3/4″ Therm| $10.00|
| P17006/| Finished Sleeve for PB Extension| $20.00| $30.00
---|---|---|---|---
| 3-125| Diverter Assembly for DFPHYID from January 2013-now| $98.00| $196.00
| 3-322| Diverter Assembly for DFPHYID from January 2013-now (Hex
Series)| $98.00| $196.00
| 1-118| Push Pull Diverter Cartridge for DFPHYID (January 2013-current)|
$32.00|
| Pressure Balance Tub & Shower Sets: Trim Parts (Please specify finish)
|
| DPB2100X1| Revere Pressure Balance Handle Complete (Obsolete since
2000)| $160.00| $175.00
| DPB2100X1C| Revere Pressure Balance Lever Only| $89.00| $99.00
| DPB2100X1D| Revere Pressure Balance Handle Dome with Button (Obsolete
since 2000)| $132.00| $146.00
| DPB2100X2| Revere Pressure Balance Face Plate| $370.00| $545.00
| DPB2100X202| Revere Pressure Balance Face Plate with Nut| $233.00| $257.00
| DPB2100X2A| Revere Pressure Balance Face Plate Nut Only| $48.00| $54.00
| DPB2100X21C| Push Pull Manual Diverter Cartridge for DFPHYID|
$46.00|
| DPB2100X21S| Spring Loaded Diverter Cartridge for DFPHYID|
$46.00|
| DPB2100X4| Revere Pressure Balance Diverter Knob Assembly| $102.00| $113.00
| DPB2111X1| Saratoga Pressure Balance Handle Complete| $166.00| $183.00
| DPB2111X1C| Saratoga Pressure Balance Lever Only| $99.00| $109.00
| DPB2130X2| Basic Series Pressure Balance Face Plate and Nut| $269.00|
$296.00
| DPB3100X2A| Pressure Balance Shower Nut for Faceplate| $48.00| $54.00
| DPB3130X2| Basic Series Pressure Balance Shower Set Face Plate with Nut|
$150.00| $300.00
| P17021X| Harper and Fillmore Pressure Balance Plate| $116.00| $162.00
| P17023XX| Harper Pressure Balance Cylinder Handle Spacer| $47.00|
| P17011| Smooth plate w/ diverter hole| $323.00| $411.00
| PB711X2| Waveland Pressure Balance Plate Trim only| $230.00| $460.00
| 11037| 501-21 PB Plate Only| $200.00|
3-431/| | Hex Mod Ext. Trim PB/TH Plate & Hub Assy (Resolve Kit for valves
that are plumbed out too far)| $150.00| $300.00
3-432/| | Hex Mod Ext. Trim PB W/Div. Plate & Hub Assy (Resolve Kit for
valves that are plumbed out too far)| $150.00| $300.00
11342/| | Hex Mod Ext. Trim PB/Th. Plate only (Resolve Kit for valves that
are plumbed out too far)| $75.00| $150.00
11343/| | Hex Mod Ext. Trim PB W/Div. Plate only (Resolve Kit for valves
that are plumbed out too far)| $75.00| $150.00
3-425/| | Hex Trad. Ext. Trim PB/TH Plate & Hub Assy (Resolve Kit for
valves that are plumbed out too far)| $150.00| $300.00
3-444/| | Hex Trad Ext. Trim PB W/Div. Plate & Hub Assy (Resolve Kit for
valves that are plumbed out too far)| $150.00| $300.00
3-426/| | Basic Ext. Trim PB/TH Plate & Hub Assy (Resolve Kit for valves
that are plumbed out too far)| $150.00| $300.00
3-427/| | Mix Ext. Trim PB/TH Plate & Hub Assy (Resolve Kit for valves that
are plumbed out too far)| $150.00| $300.00
3-428/| | Stria Ext. Trim PB/TH Plate & Hub Assy (Resolve Kit for valves
that are plumbed out too far)| $175.00| $350.00
11332/| | Hex Trad Deep Hub (Resolve Kit for valves that are plumbed out
too far)| $75.00| $150.00
11333/| | Round Plate for Ext (Resolve Kit for valves that are plumbed out
too far)| $75.00| $150.00
11334/| | Basic Deep Hub (Resolve Kit for valves that are plumbed out too
far)| $65.00| $130.00
11335/| | Basic Round Plate for Ext. (Resolve Kit for valves that are
plumbed out too far)| $75.00| $150.00
11341/| | Hub Adapter for Ext. (Resolve Kit for valves that are plumbed out
too far)| $10.00| $20.00
11336/| | Mix Deep Hub (Resolve Kit for valves that are plumbed out too
far)| $75.00| $150.00
11337/| | Stria Deep Hub (Resolve Kit for valves that are plumbed out too
far)| $100.00| $200.00
11338/| | Mix/Stria Sq. Plate for Ext. (Resolve Kit for valves that are
plumbed out too far)| $75.00| $150.00
11495/| | Mix/Stria Sq. Plate W/ DIV for Ext. (Resolve Kit for valves that
are plumbed out too far)| $75.00| $150.00
3-487/| | Mix Ext. Trim PB/TH Plate & Hub Assy W/ Div (Resolve Kit for
valves that are plumbed out too far)| $150.00| $300.00
3-488/| Stria Ext. Trim PB/TH Plate & Hub Assy W/Div (Resolve Kit for valves
that are plumbed out too far)| $175.00| $350.00
| Shower Heads and Body Spray: Trim Parts (Please specify finish)
| D830X3| Basic Series Shower Head Escutcheon/Flange Only| $66.00| $74.00
| K800X3| Escutcheon/Flange – Please use K807X3| |
| K801X1| Dolphin Shower Head Only, Less Arm and Flange| $334.00| $423.00
| K801X3| Escutcheon/Flange – Please use K807X3| |
---|---|---|---|---
| K803X1| Smooth Shower Head Only, Less Arm & Flange, all shower heads except
for K835| $173.00| $233.00
| K803X2| 8″ Shower Arm Only| $45.00| $90.00
| K803X3| Smooth Shower Escutcheon/Flange and Oring Only| $62.00| $79.00
| K805X1| Amphora/ Harper Shower Head Only, Less Arm and Flange| $357.00|
$452.00
| K805X3| Amphora/ Harper Shower Escutcheon/Flange Only| $60.00| $77.00
| K807X1| Empire Shower Head Only, Less Arm and Flange| $330.00| $417.00
| K807X3| Empire Shower Escutcheon/Flange Only| $79.00| $101.00
| K830X1| 5″, 10 Jet Shower Head Only, Less Arm and Flange| $746.00| $945.00
| K830X3| Shower Escutcheon/Flange and O-ring – Please use K803X3| |
| K831X1| Replacement 9″ Shower Head Only| $263.00| $394.00
| K831X2| Replacement 9″ Shower Arm Only| $97.00| $145.00
| K831X3| Replacement 9″ Shower Escutcheon/Flange Only| $60.00| $77.00
| K832X1| Replacement 12″ Shower Head Only| $457.00| $685.00
| K832X2| Replacement 12″ Shower Arm and Escutcheon/Flange| $113.00| $170.00
| K835X1| Replacement K835 Shower Head| |
| K835X2| Replacement K835 Shower Arm| $55.00| $110.00
| K835X3| Please use K6008X3| |
| K836X1| Traditional Multifunction Shower Head| $370.00| $500.00
3-371/| K837X1| Contemporay Multifunction Shower Head| $325.00| $465.00
| K838X3| Contemporay Shower Escutcheon/Flange Only| $55.00| $110.00
| K853X1| Body Spray Head Only, Less Flange and Nipple| $59.00| $76.00
| K853X2| 1/2″ x 2-1/2″ Finished Nipple for Body Spray| $30.00| $40.00
| K853X3| Shower Escutcheon/Flange and Oring – Please use K803X3.| |
| K863X1| Body Spray Head Only, Less Flange and Nipple| $74.00| $93.00
| K863X2| Finished Nipple for Body Spray – Please use K853X2| |
| K863X3| Shower Escutcheon/Flange and Oring – Please use K803X3| |
| K873X3| Square Escutcheon for Body Spray| $62.00| $79.00
| Part #
Wall Brackets and Slide Bar: Common Parts
Group 1
Group 2
| | |
| HDWRWALL| Dry Wall Screws and Togglers for Wall Accessories| $14.00|
| K6001X1| Hook and Collar for Hand Shower Wall Bracket| $57.00| $74.00
| K6002X1| Trim Parts with Plastic Insert, Deck Hand Shower Hose Guide| |
| K6005| Hand Shower Deck Bracket Complete| $135.00| $185.00
| K6005XR| Rough Parts with Nut and Washer for K6005, Deck Hand Shower Hose
Guide| $51.00|
| K6005XT| Trim Parts with Plastic Insert, Deck Hand Shower Hose Guide|
$92.00| $117.00
| K6008X3| Wall Bracket Flange For K6001,K6002,K6008| $60.00| $77.00
| K6024X1| Post with Screw and Top Cap for Hand Shower Slide Bar| $164.00|
$209.00
| K6024X2| Handle Only for Hook Assembly for Hand Shower Slide Bar| $66.00|
$84.00
| K6024X3| Bar Only for Hand Shower Slide Bar| $45.00| $61.00
3-049/| K6100X3| Finished Hand Shower Hose 59″, 1/2″ x 1/2″ (Please specify
finish)| $110.00| $198.00
3-412/| | ASSY. HANDSHOWER HOLDER, SLIDE BAR (K6025)| $108.00| $163.00
3-413/| | ASSY. HANDSHOWER HOLDER, SLIDE BAR (K6024)| $108.00| $163.00
| | | |
| Bidet Sets: Common Parts
|
| 1180| Brass Nut for Bidet Spray and Pop-Up Guide| $11.00|
| 13 ROD| 13″ Pop-Up Rod (Please specify finish.)| $48.00| $63.00
| 34SAE| Washer for Bidet Spray and Pop-Up Guide| $5.00|
| 4000B| Pop-Up Guide with Nut and Washer (Please specify finish)| $82.00|
$105.00
| BDPLUG| Bidet Drain Plug, Please use LD499PX2| |
---|---|---|---|---
| K4400XP| Cover Plate for Single Hole Bidet (Please specify finish)|
$105.00| $136.00
3-160/| KBD1000| Complete Bidet Diverter and Vacuum Breaker (Please specify
finish)| $598.00| $698.00
| KBD100X1P| Bidet Diverter Handle Complete| $117.00| $151.00
| KBD100X1038| Bidet 10″ Supply Lines| $28.00|
| KBD100X2| Bidet Diverter Handle Escutcheon| $69.00| $93.00
| KBD100X2438| Bidet 24″ Spray Hose| $20.00|
| KBD100X90ELB| Bidet Diverter 90 Degree Elbow| |
| KBD100XDVC| Bidet Diverter and Vacuum Breaker Only| $190.00|
| KBD100XSPC| Complete Bidet Spray Assembly (Please specify finish)| $104.00|
$134.00
| KBD100XYT| Bidet Diverter Y Connector| $19.00|
| LD499P| Complete Automatic Lavatory Drain, Phylrich only (Please specify
finish)| $87.00| $155.00
| M501BIDET| Bidet Aerator (Please specify finish.)| $41.00| $56.00
| VB130| Top and Bottom Cone Washer for Bidet Diverter Valve| $20.00|
3-437/| | Bidet Aerator 2.2GPM 15/16″ Male Housing| |
| LC499CNL/HNL| | $27.00|
| Wall Accessories: Trim Parts (Please specify finish)
| | | |
| DB30X3| Glass Tumbler| $19.00|
| DB20X3| Glass Soap Dish| $19.00|
| DB100X1| Glass Shelf| $27.00|
| KAX1| Back Plate Only with Mounting Screws, Baroque Collection| $91.00|
$116.00
| KA10X2| Hook Only, Baroque Collection| $175.00| $224.00
| KA25X2A| Rubber Ring for ALL Wall Mounted Soap Dish| $7.00|
| KA25X3| Crystal Soap Dish for Wall Mounted Soap Dish| $75.00|
| KA30X3| Glass Only for Wall mounted Glass Holder| $50.00|
| KA40X2| Post Only for Towel Ring, Baroque Collection| $147.00| $187.00
| KA40X3| Please use KPG40X3| |
| KA50X2| Post Only for Paper Holder, Baroque Collection (2 Required)|
$202.00| $256.00
| KA50X3| Please use KG50X3| |
| KA65X2| Post Only for Towel Bars, Baroque Collection (2 Required)| $202.00|
$256.00
| KA65X3| Please use KPG65X3| |
| KA70X3| Please use KPG70X3| |
| KA75X3| Please use KPG75X3| |
| KCBX1| Please use KCCX1| |
| KCBX2| Black Porcelain Only, Black Mirabella Porcelain Collection| $22.00|
| KCB10X2| Please use KCC10X2| |
| KCB25X3| Please use KA25X3_001| |
| KCB30X3| Please use KA30X3_001| |
| KCB40X2| Please use KCC40X2| |
| KCB40X3| Please use KPG40X3| |
| KCB50X2| Please use KCC50X2| |
| KCB50X3| Please use KG50X3| |
| KCB65X2| Please use KCC65X2| |
| KCB65X3| Please use KPG65X3| |
| KCB70X3| Please use KA70X3| |
| KCB75X3| Please use KA75X3| |
| KCCX1| Back Plate Only with Mounting Screws, Mirabella Frosted Crystal
Collection| $77.00| $98.00
| KCCX2| Frosted Crystal Only, Mirabella Frosted Crystal Collection| $30.00|
| KCC10X2| Hook Only, Mirabella Frosted Crystal Collection| $146.00| $187.00
| KCC25X3| Please use KA25X3_001| |
---|---|---|---|---
| KCC30X3| Please use KA30X3_001| |
| KCC40X2| Post Only for Towel Ring, Mirabella Frosted Crystal Collection|
$145.00| $186.00
| KCC40X3| Please use KPG40X3| |
| KCC50X2| Post Only for Paper Holder, Mirabella Frosted Crystal Collection
(2 Required)| $163.00| $206.00
| KCC50X3| Please use KG50X3| |
| KCC65X2| Post Only for Towel Bars, Mirabella Frosted Crystal Collection (2
Required)| $163.00| $206.00
| KCC65X3| Please use KPG65X3| |
| KCC70X3| Please use KA70X3| |
| KCC75X3| Please use KA75X3| |
| KCWX1| Please use KCCX1| |
| KCWX2| White Porcelain Only, White Mirabella Porcelain Collection| $19.00|
| KCW10X2| Please use KCC10X2| |
| KCW25X3| Please use KA25X3_001| |
| KCW30X3| Please use KA30X3_001| |
| KCW40X2| Please use KCC40X2| |
| KCW40X3| Please use KPG40X3| |
| KCW50X2| Please use KCC50X2| |
| KCW50X3| Please use KG50X3| |
| KCW65X2| Please use KCC65X2| |
| KCW65X3| Please use KPG65X3| |
| KCW70X3| Please use KA70X3| |
| KCW75X3| Please use KA75X3| |
| P23028| Accessory Back Plate (Louis| |
| | Wall Accessories: Trim Parts (Please specify finish)| |
| | | |
| KEX1| Back Plate Only with Mounting Screws, Louis XIV Crystal Collection|
$89.00| $112.00
| KE10X2| Hook Only, Louis XIV Crystal Collection| $189.00| $240.00
| KE25X3| Please use KA25X3_001| |
| KE30X3| Please use KA30X3_001| |
| KE40X2| Post Only for Towel Ring, Louis XIV Crystal Collection| $182.00|
$231.00
| KE40X3| Please use KPG40X3| |
| KE50X2| Post Only for Paper Holder, Louis XIV Crystal Collection (2
Required)| $225.00| $286.00
| KE50X3| Please use KG50X3| |
| KE65X2| Post Only for Towel Bars, Louis XIV Crystal Collection (2
Required)| $225.00| $286.00
| KE65X3| Please use KPG65X3| |
| KE70X3| Please use KA70X3| |
| KE75X3| Please use KA75X3| |
| KESX1| Back Plate Only with Mounting Screws, Regent Crystal Collection|
$89.00| $112.00
| KES10X2| Hook Only, Regent Crystal Collection| $147.00| $188.00
| KES25X3| Please use KA25X3_001| |
| KES30X3| Please use KA30X3_001| |
| KES40X2| Post Only for Towel Ring, Regent Crystal Collection| $174.00|
$221.00
| KES40X3| Please use KG40X3| |
| KES50X2| Post Only for Paper Holder, Regent Crystal Collection (2
Required)| $179.00| $226.00
| KES50X3| Please use KG50X3| |
| KES65X2| Post Only for Towel Bars, Regent Crystal Collection (2 Required)|
$179.00| $226.00
| KES65X3| Please use KGB65X3| |
| KES70X3| Please use KGB70X3| |
| KES75X3| Please use KGB75X3| |
| KFWX1| Please use KEX1| |
---|---|---|---|---
| KFW10X2| Please use KA10X2| |
| KFW25X3| Please use KA25X3_001| |
| KFW30X3| Please use KA30X3_001| |
| KFW40X2| Please use KA40X2| |
| KFW40X3| Please use KPG40X3| |
| KFW50X2| Please use KMA50X2| |
| KFW50X3| Please use KG50X3| |
| KFW65X2| Please use KMA65X2| |
| KFW65X3| Please use KPG65X3| |
| KFW70X3| Please use KA70X3| |
| KFW75X3| | |
| KGX1| Back Plate Only with Mounting Screw, Small Georgetown Collection|
$67.00| $86.00
| KG10X2| Hook Only, Small Georgetown Collection| $133.00| $170.00
| KG25X3| Please use KA25X3_001| |
| KG30X3| Please use KA30X3_001| |
| KG40X2| Post Only for Towel Ring, Small Georgetown Collection| $132.00|
$170.00
| KG40X3| 6″ Smooth Towel Ring Only| $195.00| $250.00
| KG50X2| Post Only for Paper Holder, Small Georgetown Collection (2
Required)| $151.00| $192.00
| KG50X3| Roller with Spring for Paper Holder| $147.00| $187.00
| KG65X2| Post Only for Towel Bars, Small Georgetown Collection (2 Required)|
$131.00| $168.00
| KG65X3| 18″ Smooth 1/2″ Towel Bar Only| $72.00| $92.00
| KG70X3| 24″ Smooth 1/2″ Towel Bar Only| $72.00| $92.00
| KG75X3| 30″ Smooth 1/2″ Towel Bar Only| $72.00| $92.00
10990/| | 24″ Square Bar for Towel Bar| $72.00| $92.00
10991/| | 30″ Square Bar for Towel Bar| $72.00| $92.00
| KG465X4| Plastic Soap Dish for Recessed Soap & Grab Georgetown Collection –
no longer available| |
| KG475X3| Please use KG50X3| |
| KGBX1| Back Plate Only with Mounting Plate & Screws, Large Georgetown
Collection| $67.00| $88.00
| KGB10X2| Hook Only, Large Georgetown Collection| $142.00| $183.00
| KGB25X3| Please use KA25X3_001| |
| KGB30X3| Please use KA30X3_001| |
| KGB40X2| Post Only for Towel Ring, Large Georgetown Collection| $148.00|
$190.00
| KGB40X3| Please use KG40X3| |
| KGB50X2| Post Only for Paper Holder, Large Georgetown Collection (2
Required)| $143.00| $182.00
| KGB50X3| Please use KG50X3| |
| KGB65X2| Post Only for Towel Bars, Large Georgetown Collection (2
Required)| $143.00| $182.00
| KGB65X3| 18″ Towel Bar Only| $50.00| $80.00
| KGB70X3| 24″ Towel Bar Only| $50.00| $80.00
| KGB75X3| 30″ Towel Bar Only| $50.00| $80.00
| KLX1| Back Plate w/ Mounting Plate & Screws, Le Verre/La Crosse Collection|
$116.00| $147.00
| KL10X2| Hook Only, Le Verre/La Crosse Collection| $88.00| $111.00
| KL40X2| Post Only for Towel Ring, Le Verre/La Crosse Collection| $81.00|
$104.00
| KL40X3| Please use KG40X3| |
| KL50X2| Post Only for Paper Holder, Le Verre/La Crosse Collection (2
Required)| $78.00| $99.00
| KL50X3| Please use KG50X3| |
| KL65X2| Please use KGB65X2| |
| KL65X3| Please use KGB65X3| |
| KL70X3| Please use KGB70X3| |
| KL75X3| Please use KG75X3| |
| KLSX1| Back Plate Only with Mounting Screws, Swing Collection| $81.00|
$104.00
---|---|---|---|---
| KLSX2| Swing Insert, Swing Collection| $209.00| $265.00
| KLS10X2| Hook Only, Swing Collection| $139.00| $177.00
| KLS25X3| Please use KA25X3_001| |
| KLS30X3| Please use KA30X3_001| |
| KLS40X2| Post Only for Towel Ring, Swing Collection| $142.00| $182.00
| KLS40X3| Please use KG40X3| |
| KLS50X2| Post Only for Paper Holder, Swing Collection (2 Required)|
$149.00| $189.00
| KLS50X3| Please use KG50X3| |
| KLS65X2| Post Only for Towel Bars, Melon Collection (2 Required)| $149.00|
$189.00
| KLS65X3| Please use KGB65X3| |
| KLS70X3| Please use KGB70X3| |
| KLS75X3| Please use KGB75X3| |
| | | |
| Wall Accessories: Trim Parts (Please specify finish)
| | | |
| KMX1| Back Plate Only with Mounting Screws, Melon Collection| $81.00|
$104.00
| KMX2| Melon Insert, Melon Collection| $85.00| $109.00
| KM10X2| Hook Only, Melon Collection| $139.00| $177.00
| KM25X3| Please use KA25X3_001| |
| KM30X3| Please use KA30X3_001| |
| KM40X2| Post Only for Towel Ring, Melon Collection| $142.00| $182.00
| KM40X3| Please use KG40X3| |
| KM50X2| Post Only for Paper Holder, Melon Collection (2 Required)| $149.00|
$189.00
| KM50X3| Please use KG50X3| |
| KM65X2| Post Only for Towel Bars, Melon Collection (2 Required)| $149.00|
$189.00
| KM65X3| Please use KGB65X3| |
| KM70X3| Please use KGB70X3| |
| KM75X3| Please use KGB75X3| |
| KMA| series Can be used for KMB, KMC, KMD, and KMF unless otherwise noted|
|
| KMAX1| Back Plate Only with Mounting Screws, Valencia Marble Collection|
$89.00| $112.00
| KMA10X2| Hook Only, Valencia Marble Collection| $175.00| $224.00
| KMA25X3| Please use KA25X3_001| |
| KMA30X3| Please use KA30X3_001| |
| KMA40X2| Post Only for Towel Ring, Valencia Marble Collection| $147.00|
$187.00
| KMA40X3| Please use KPG40X3| |
| KMA50X2| Post Only for Paper Holder, Valencia Marble Collection (2
Required)| $180.00| $228.00
| KMA50X3| Please use KG50X3| |
| KMA65X2| Post Only for Towel Bars, Valencia Marble Collection (2 Required)|
$180.00| $228.00
| KMA65X3| Please use KPG65X3| |
| KMA70X3| Please use KA70X3| |
| KMA75X3| Please use KA75X3| |
| KNAX1| Please use KLSX1| |
| KNA10X2| Please use KLS10X2| |
| KNA25X3| Please use KA25X3_001| |
| KNA30X3| Please use KA30X3_001| |
| KNA40X2| Please use KLS40X2| |
| KNA40X3| Please use KG40X3| |
| KNA50X2| Please use KLS50X2| |
| KNA50X3| Please use KG50X3| |
| KNA65X2| Please use KLS65X2| |
---|---|---|---|---
| KNA65X3| Please use KGB65X3| |
| KNA70X3| Please use KGB70X3| |
| KNA75X3| Please use KGB75X3| |
| KPX1| Mounting and Back Plate, Amphora| $55.00| $69.00
| KPX1M| Mounting Plate, Amphora| $83.00| $106.00
| KP10X2| Hook Only, Amphora| $74.00| $93.00
| KP25X2| Post Only, Amphora| $112.00| $144.00
| KP40X2| Post Only for Towel Ring, Amphora| $98.00| $125.00
| KP40X3| Towel Ring Only, Amphora| $101.00| $127.00
| KP50X2| Post Only for 2 Post Paper Holder, Amphora| $131.00| $167.00
| KP50X2A| Trim for Dual Paper Holder and Towel Bar, Amphora| $65.00| $84.00
| KP50X3| Roller with Spring for Paper Holder, Amphora| $74.00| $93.00
| KP100X1| Glass Only for Shelf, Amphora and Waveland| $282.00|
| KP100X2| Shelf Nut, Amphora| $81.00| $70.00
| KPGX1| Back Plate Only with Mounting Screws, Georgian Collection| $67.00|
$87.00
| KPG10X2| Hook Only, Georgian Collection| $146.00| $185.00
| KPG25X3| Please use KA25X3_001| |
| KPG30X3| Please use KA30X3_001| |
| KPG40X2| Post Only for Towel Ring, Georgian Collection| $145.00| $184.00
| KPG40X3| 6″ Ribbed Towel Ring Only| $191.00| $243.00
| KPG50X2| Post Only for Paper Holder, Georgian Collection (2 Required)|
$181.00| $230.00
| KPG50X3| Please use KG50X3| |
| KPG65X2| Post Only for Towel Bars, Georgian Collection (2 Required)|
$181.00| $230.00
| KPG65X3| 18″ Ribbed 1/2″ Towel Bar Only| $249.00| $316.00
| KPG70X3| 24″ Ribbed 1/2″ Towel Bar Only| $249.00| $316.00
| KPG75X3| 30″ Ribbed 1/2″ Towel Bar Only| $249.00| $316.00
| KRX1| Back Plate Only with Mounting Screws, Ribbon & Reed Collection (Solid
Finish Only not SF)| $77.00| $98.00
| KRX2| Ribbon & Reed Insert Only, Ribbon & Reed Collection (Solid Finish
Only not SF)| $70.00| $90.00
| KR10X2| Hook Only, Ribbon & Reed Collection (Solid Finish Only not SF)|
$146.00| $187.00
| KR25X3| Please use KA25X3_001| |
| KR30X3| Please use KA30X3_001| |
| KR40X2| Post Only for Towel Ring, Ribbon & Reed Collection (Solid Finish
Only not SF)| $145.00| $186.00
| KR40X3| Please use KPG40X3| |
| KR50X2| Post Only for Paper Holder, Ribbon & Reed Collection (2 Required)
(Solid Finish Only not SF)| $163.00| $206.00
| KR50X3| Please use KG50X3| |
| KR65X2| Post Only for Towel Bars, Ribbon & Reed Collection (2 Required)
(Solid Finish Only not SF)| $163.00| $206.00
| KR65X3| Please use KPG65X3| |
| KR70X3| Please use KA70X3| |
| KR75X3| Please use KA75X3| |
| KR475X3| Please use KG50X3| |
| | | |
| Wall Accessories: Trim Parts (Please specify finish)
| | | |
| KRSFX1| Please use KRX1| |
| KRSFX2| Ribbon & Reed Insert Only, Ribbon & Reed Collection (Special Finish
Only-SF)| $69.00|
| KR10SFX2| Please use KCC10X2| |
| KR25SFX3| Please use KA25X3_001| |
| KR40SFX2| Please use KCC40X2| |
| KR40SFX3| Please use KPG40X3| |
| KR50SFX2| Please use KCC50X2| |
---|---|---|---|---
| KR50SFX3| Please use KG50X3| |
| KR65SFX2| Please use KCC65X2| |
| KR65SFX3| Please use KPG65X3| |
| KR70SFX3| Please use KA70X3| |
| KR75SFX3| Please use KA75X3| |
| KR475SFX3| Please use KG50X3| |
| KS10X1| Back Plate Only for Robe Hook with Mounting Screws, Swan
Collection| $76.00| $98.00
| KS10X2| Hook Only, Swan Collection| $175.00| $225.00
| KS40X1| Back Plate Only for Towel Ring with Mounting Screws, Swan
Collection| $87.00| $112.00
| KS40X2| Post Only for Towel Ring, Swan Collection| $149.00| $190.00
| KS40X3| Please use KG40X3| |
| KS50X1| Back Plate Only for Paper Holders with Mounting Screws, Swan
Collection| $88.00| $112.00
| KS50X2L| Post Only for Paper Holder, Swan Collection (Left Side)| $205.00|
$260.00
| KS50X2R| Post Only for Paper Holder, Swan Collection (Right Side)| $205.00|
$260.00
| KS50X3| Please use KG50X3| |
| KS65X1| Back Plate Only for Towel Bars with Mounting Screws, Swan
Collection| $88.00| $112.00
| KS65X2R| Post Only for Towel Bars, Swan Collection, Right| $197.00| $251.00
| KS65X2L| Post Only for Towel Bars, Swan Collection, Left| $197.00| $250.00
| KS65X3| Please use KG65X3| |
| KS70X3| Please use KG70X3| |
| KS75X3| Please use KG75X3| |
| KSA| series Can be used for KSB, KSC, KSD, and KSF unless otherwise noted|
|
| KSAX1| Please use KEX1| |
| KSA10X2| Please use KES10X2| |
| KSA25X3| Please use KA25X3_001| |
| KSA30X3| Please use KA30X3_001| |
| KSA40X2| Please use KES40X2| |
| KSA40X3| Please use KG40X3| |
| KSA50X2| Please use KES50X2| |
| KSA50X3| Please use KG50X3| |
| KSA65X2| Please use KES65X2| |
| KSA65X3| Please use KGB65X3| |
| KSA70X3| Please use KGB70X3| |
| KSA75X3| Please use KGB75X3| |
| KTA| series Can be used for KTB, KTC, KTD, and KTF unless otherwise noted|
|
| KTAX1| Please use KEX1| |
| KTA10X2| Please use KE10X2| |
| KTA25X3| Please use KA25X3_001| |
| KTA30X3| Please use KA30X3_001| |
| KTA40X2| Please use KE40X2| |
| KTA40X3| Please use KPG40X3| |
| KTA50X2| Please use KE50X2| |
| KTA50X3| Please use KG50X3| |
| KTA65X2| Please use KE65X2| |
| KTA65X3| Please use KPG65X3| |
| KTA70X3| Please use KA70X3| |
| KTA75X3| Please use KA75X3| |
| KX65X3| 18″ Towel Bar Only| $254.00| $356.00
| KX70X3| 24″ Towel Bar Only| $258.00| $361.00
| KX75X3| 30″ Towel Bar Only| $266.00| $372.00
---|---|---|---|---
| KWX1| Back Plate Only with Mounting Screws, Victorian White Porcelain
Collection| $74.00| $93.00
| KW10X2| Hook Only, Victorian White Porcelain Collection| $131.00| $168.00
| KW25X3| Please use KA25X3_001| |
| KW30X3| Please use KA30X3_001| |
| KW40X2| Post Only for Towel Ring, Victorian White Porcelain Collection|
$137.00| $175.00
| KW40X3| Please use KG40X3| |
| KW50X2| Post Only for Paper Holder, Victorian White Porcelain Collection (2
Required)| $127.00| $162.00
| KW50X3| Please use KG50X3| |
| KW65X2| Post Only for Towel Bars, Victorian White Porcelain Collection (2
Required)| $139.00| $179.00
| KW65X3| Please use KG65X3| |
| KW70X3| Please use KG70X3| |
| KW75X3| Please use KG75X| |
| | | |
| Old Tyme Tub and Shower Combinations; Wall and Deck: Trim Parts (Please
specify finish)
|
| K2390DEXT| Pair (2) of 2″ Deck Extensions for Deck Elbow (Please specify
finish.)| $169.00| $215.00
| | Can be used for K2390D-K2394D| |
| K2390DX7| Deck Elbow for Old Tyme (2 Required) Can be used for K2390D-
K2394D| $310.00| $394.00
| K2390EXT| Pair (2) of Extended Wall Flanges, Please Specify Length, 2″|
$182.00| $231.00
| | (Please specify finish.) – Can be used for K2390-K2394| |
| K2390FRX2A| Sleeve for Floor Riser| $101.00| $129.00
| K2390FRX3| Flange for Floor Riser| $134.00| $170.00
| K2390X1| Brass Cross Handle Complete, Please Specify if H or C Only (Chaud
and Froid are not Available)| $89.00| $116.00
| K2390X2| Wall Flange for Wall Mounted Old Tyme (2 Required) Can be used for
K2390-K2394| $46.00| $62.00
| K2390X21| Diverter Porcelain Lever Handle Complete for Old Tyme Cross
Handle| $98.00| $127.00
| K2390X21B| Finished Diverter Bonnet/Escutcheon for Old Tyme Cross Handle|
$44.00| $53.00
| K2390X2A| Off Set Nipple for Wall Mounted Old Tyme (2 Required) Can be used
for K2390-K2394| $38.00| $51.00
| K2390X2B| Finished Bonnet/Escutcheon for Old Tyme Cross Handle, Hot and
Cold Only – Can be used for K2390-K2394| $37.00| $49.00
| K2390X5| Hand Shower with 36″, 1/2″ x 1/2″ Hose for Old Tyme Unit ( NO
GOOD)| $403.00| $510.00
4-128/| K2390X5A| Hand Shower Less Hose for Old Tyme Unit, ONLY AVAILABLE
WITH METAL HANDLE| $303.00| $382.00
3-049/| K2390X5B| Hand Shower Hose Only 36″, 1/2″ x 1/2″ for Old Tyme Unit
ONLY AVAILABLE IN 59″| $442.00| $560.00
| P01134| Old Tyme Hand Shower Porcelain insert only for K2390| $59.00|
| K2390XFR36P| Under the Floor Secure Plate| |
| K2391D| Please use K2391 for Remaining Parts| |
| K2391X1C| Porcelain Cross Handle Complete, Cold| $102.00|
| K2391X1H| Porcelain Cross Handle Complete, Hot| $102.00|
| K2393D| Please use K2393x for Remaining Parts| |
| K2393X1| Porcelain Lever Handle, Hot and Cold Only Complete for Old Tyme|
$65.00| $130.00
| K2393X1CCD| Complete Valve: Cold| $64.00|
| K2393X1CHT| Complete Valve: Hot| $60.00|
| K2394AX21| Diverter Gray Marble Lever Handle Complete for Old Tyme Marble
Lever Handle| $110.00| $140.00
| K2394AX5A| Hand Held Shower Only for Old Tyme Grey| $210.00| $267.00
| K2394BX21| Diverter White Marble Lever Handle Complete for Old Tyme Marble
Lever Handle| $123.00| $159.00
| K2394BX5A| Hand Held Shower Only for Old Tyme White| $210.00| $267.00
| K2394CX21| Diverter Black Marble Lever Handle Complete for Old Tyme Marble
Lever Handle| $123.00| $159.00
| K2394CX5A| Hand Held Shower Only for Old Tyme Black| $210.00| $267.00
| K2394DX21| Diverter Beige Marble Lever Handle Complete for Old Tyme Marble
Lever Handle| $123.00| $159.00
| K2394DX5A| Hand Held Shower Only for Old Tyme Beige| $210.00| $267.00
| K2394FX21| Diverter Green Marble Lever Handle Complete for Old Tyme Marble
Lever Handle| $123.00| $156.00
| K2394FX5A| Hand Held Shower Only for Old Tyme Green| $280.00| $356.00
---|---|---|---|---
| K2394X1C| Complete Valve for Old Tyme Marble Lever Handle, Cold| $24.00|
| K2394X1H| Complete Valve for Old Tyme Marble Lever Handle, Hot| $25.00|
| P02194| Diverter Nut for Old Tyme| $12.00|
| P37136| O-Ring 6.75X1.78mm for Old Tyme| $20.00|
| LC499’S| Current cartridge| $27.00|
| VB1001’S| ALSO USED 2008-2012| $32.00|
| P01135| Porcelain lever handle insert only for Old Tyme| $40.00|
4-128/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS
(Metal Handle)| $303.00| $382.00
4-499/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
White Marble| $453.00| $532.00
4-500/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Black Marble| $453.00| $532.00
4-501/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Beige Marble| |
4-502/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Green Marble| |
4-503/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Soapstone| |
4-504/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Green Onyx| |
4-505/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Brown Onyx| |
4-506/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Pink Onyx| |
4-507/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Black Onyx| |
4-508/| Old Tyme Unit Replacement Hand Shower| Hand Shower, Exp. T/HS,
Bleu Sodalite| |
| Hand Shower: Trim Parts (Please specify finish.)
| | | |
| K6100X5HPXX| Harper Hand Shower Diverter Hose| $53.00|
| K6104X5A| Amphora Hand Shower Less Hose| $433.00| $503.00
| K6526X5A| Georgian Hand Shower Less Hose| $224.00| $284.00
3-066/| | Hex Series Hand Shower Less Hose| $190.00| $380.00
| K6530X5A| Round Hand Shower Less Hose| $193.00| $290.00
| K6538AX5A| Gray Marble Hand Held Shower Less Hose| $280.00| $356.00
| K6538BX5A| White Marble Hand Held Shower Less Hose| $280.00| $356.00
| K6538CX5A| Black Marble Hand Held Shower Less Hose| $280.00| $356.00
| K6538DX5A| Beige Marble Hand Held Shower Less Hose| $280.00| $356.00
| K6538FX5A| Green Marble Hand Held Shower Less Hose| $280.00| $356.00
| K6560X5A| Georgetown Hand Shower Less Hose| $224.00| $284.00
| K6640X5A| Green Onyx Hand Shower Less Hose| $350.00| $443.00
| K6641X5A| Brown Onyx Hand Shower Less Hose| $350.00| $443.00
| K6642X5A| Bleu Sodalite Hand Shower Less Hose| $546.00| $692.00
| K6643X5A| Pink Onyx Hand Shower Less Hose| $350.00| $443.00
| K6644X5A| Black Onyx Hand Shower Less Hose| $350.00| $443.00
| K6661X5A| White Porcelain Hand Shower Less Hose| $269.00| $342.00
| P18029X| Harper/ Basic Hand Held Shower Adapter| $146.00| $155.00
| | | |
| Single Hole Bar Faucets: Common Parts (Please specify finish.)
| VB1001HNL| Hot Cartridge for all Single Hole Bar Faucets| $38.00|
| VB1001CNL| Cold Cartridge for all Single Hole Bar Faucets| $38.00|
| VB19001| Body Only for Single Hole Bar Faucet, Less Spout, Handles and
Valves| $445.00| $564.00
| VB19002| Hose set for Bar Faucet| $40.00|
| VB19007| Spout w/Nut and Washer for all Single Hole Bar Faucets, 5″|
$134.00| $240.00
| VB19007H| Spout w/Nut and Washer for all Single Hole Bar Faucets, 9″|
$120.00| $152.00
| | | |
| Single Hole Bar Faucets: Trim Parts (Please specify finish.)
|
---|---
| D8205X1| 3Ring Bar, Handle with Holder, please use DK205X1| |
| D8205X5| 3Ring Bar, Supply Hose, 30″ Long, Please use DK205X5| |
| K8108X1| Handle Complete, Hand Cut Crystal Bar Faucet| $95.00| $121.00
| K8108X1D| Threaded Rod and End Cap for Hand Cut Crystal Bar Faucet Handle|
$51.00| $67.00
| K8158AX1| Handle Complete for Marble Bar Faucet – Gray| $95.00| $121.00
| K8158BX1| Handle Complete for Marble Bar Faucet – White| $85.00| $109.00
| K8158CX1| Handle Complete for Marble Bar Faucet – Black| $85.00| $109.00
| K8158DX1| Handle Complete for Marble Bar Faucet – Beige| $85.00| $109.00
| K8158FX1| Handle Complete for Marble Bar Faucet – Green| $95.00| $121.00
| K8158X1B| Threaded Rod and End Cap for Marble Bar Faucet Handle| $81.00|
$107.00
| K8160X1| Handle Complete, Georgetown Bar Faucet| $98.00| $112.00
| K8160X2| Bar Faucet Sleeve for K8160 Body| $64.00| $82.00
| K8161X1| Handle Complete, Colonial White Porcelain Bar Faucet| $67.00|
$85.00
| K8161X1B| Threaded Rod and End Cap for Colonial White Porcelain Bar Faucet
Handle| $65.00| $87.00
| K8190X1| Handle Complete for Jamestown Bar Faucet| $154.00| $196.00
| K8200X1| Handle Complete for Koral Bar Faucet| $108.00| $138.00
| K8200X1A| Top Button for Koral Bar Faucet Handle| $46.00| $60.00
| K8200X2| Escutcheon (Sleeve) Only for Koral Bar Faucet| $81.00| $105.00
| LC205D| 3Ring Bar, Cartridge and 28mm Nut, Please use LC205DK| |
| LC205DK| 3Ring Kitchen Cartridge and 28mm Nut (Only for DK205)| $28.00|
| MHWX205| 3Ring Bar, Mounting Hardware| $18.00|
| | | |
| Kitchen Faucet: Common and Trim Parts (Please specify finish.)
| | | |
| DK205SX6| 3Ring Side Spray Assembly (hand spray, hose, deck bracket and
components)| $114.00|
| DK205SX6A| 3Ring Side Spray Diverter and Retaining Ring for Valve| $16.00|
| DK205X1| 3Ring Kitchen Handle with Holder| $47.00|
| DK205X1C| 3Ring Side Spray Cap| $33.00|
| DK205X2| 3Ring Handle Escutcheon| $103.00| $164.00
| DK205X3| 3Ring Spout| $399.00|
| DK205X3A| 3Ring Spout Base| $223.00|
| DK205X5| 3Ring Kitchen Supply Hose, 30″ Long| $28.00|
| DK205X5SS| 3Ring Kitchen Side Spray Hose| $33.00|
| LC205DK| 3Ring Kitchen Cartridge and 28mm Nut| $28.00|
| MHWX205K| 3Ring Kitchen Mounting Hardware| $18.00|
Download PDF:Phylrich 1549HEXT Hot Extended Stem User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>