beckett M90AUL GPH Submersible Pump Owner’s Manual

beckett M90AUL GPH Submersible Pump

Product Information

The Beckett Submersible Pump is available in seven models: M90AUL, M160AUL, M160AS, M290AUL, M430AUL, M290AS & M430AS. These pumps are designed for pond and fountain applications and are carefully inspected and tested for safety and performance. The pumps are supplied with a grounding conductor and ground attachment plug to reduce the risk of electric shock. The National Electric Code requires a ground fault circuit interrupter (GFCI) in the branch circuit supplying fountain pumps and other pond equipment. Ensure that the electrical cord loops below the electrical outlet to form a Drip Loop to prevent water from running down the cord into the electrical outlet.

Product Usage Instructions

Before using the Beckett Submersible Pump, read the user manual carefully and save it for future reference. To avoid pump damage and/or serious injury, follow the instructions and warnings in the manual.

Electrical Safety

• Use a properly grounded, grounding-type receptacle to connect the pump.
• Do not remove the grounding pin from the plug.
• Do not connect to any voltage other than shown on the pump.
• Use only on portable self-contained fountains no larger than 5 feet in any dimension to reduce the risk of electric shock.
• Always disconnect from electrical outlet before handling the pump.

Usage Precautions

• Operate the pump completely submerged in freshwater only for proper cooling.
• Do not let the pump run dry or lift the pump by the power cord.
• Do not pump flammable liquids or heated liquids.
• Ensure that the water level is above the minimum water level at all times to get the best results.
• Never restrict the pump’s intake to avoid damage.

Maintenance

• For best results, operate the pump completely submerged.
• Clean the Sensor periodically (3-6 months) for M160AS and clean the Sensor eye periodically (3-6 months) for M290AS & M430AS.
• A clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake.
• To clean the pump, remove the front plate and the impeller. Use a small brush or stream of water to remove any debris. CAUTION: The pump shaft cannot be removed except M160AS.

Beckett pumps are carefully inspected and tested to ensure both safety and operating performance for pond and fountain applications. However, failure to follow the instructions and warnings in this manual may result in pump damage and/or serious injury. Be sure to read and save this manual for future reference.

M160AS For best results, take out the back cover, wipe the Sensor clean periodically (3-6 months). M290AS &M430AS: For best results, take out the Sensor Screen, wipe the Sensor eye clean periodically (3-6 months). Pump must be submerged in water below sensor to operate. A clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the
intake. If less flow is desired, adjust it with the flow control. Never restrict the pump’s intake. To clean the pump, remove the front plate and the impeller. Use a small brush or stream of water to remove any debris.

CAUTION : The pump shaft cannot be removed except M160AS

IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING

• Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
  NOTE : always disconnect from electrical outlet before handling the pump.

• Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.

• Check the intake screen to ensure it is not clogged with debris.

• Remove the pump inlet to access the impeller area. Turn the impeller to ensure it is not broken or jammed.

• If the impeller area is encrusted with minerals or corrosion, gently scrape the area clean.

• If your pump has been idle for an extended period, it may be necessary to apply a drop of light oil to the shaft and spin the impeller by hand until it turns freely.

• Monthly maintenance will add to your pump’s life

WARNING

• The National Electric Code requires that a ground fault circuit interrupter (GFCI) be used in the branch circuit supplying fountain pumps and other pond equipment. See your electrical supplies dealer for this device.
• Do not remove the grounding pin from the plug.
• Do not connect to any voltage other than shown on the pump.
• Do not pump flammable liquids.
• Do not use with water above 87º Fahrenheit (30ºC).
• To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
• Risk of electrical shock. This pump is supplied with a grounding conductor and ground attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
• Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”.
• This will prevent water from running down the cord into the electrical outlet.

CAUTION

• Always disconnect from electrical outlet before handling the pump.
• Do not let the pump run dry.
• Do not lift the pump by the power cord.
• Do not pump heated liquids.
• Operate in freshwater only.
• Operate pump completely submerged for proper cooling.

ATTENTION
In order to get best results, operate pump completely submerged. Keep the water level above the minimum water level at ALL TIMES.

INSTALLATION INSTRUCTIONS

LIMITED WARRANTY

Each Beckett Corporation (“Beckett”) product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth below. The Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows

Pump Models: Liner Material:

• FR Series, DP800-1800, G Series, FC Series ………… 2 Years 35 mil PVC……………………………20 Years
• BK17/22 Series …………………………………. 2 Years 40 mil EPDM…………………………… 20 Years
• Other Pump Models …………………………………..1 Year 20 mil PVC……………………………15 Years
• Pre-Formed Poly Ponds………………………..………15 Years UV9/UV13 Filter…………………………….. 1 Year
• Waterfall Weir & Skimmer………………………..………. 5 Years All Other Beckett Products.……………………………90 Days

APPLICATION

The warranty covers only properly installed and maintained Beckett products and is limited to application at normal temperature 32º F to 86º F, (0º C to 30º C) pumping fluids with a specific gravity up to 1.1 and with a pH range of 5 to 9 (fresh water). Other liquid applications and extreme temperature uses must be approved in advance by Beckett. The warranty does not apply to or cover damages or defects caused by external causes, including, but not limited to, improper or faulty installation or unauthorized modification, lightning, electrical surges, abuse, misuse or abnormal use or misapplication, including use in a manner inconsistent with the product’s intended function. The purchaser is responsible for determining the suitability of the product for its intended use. If products are damaged in transit, a claim should be
filed with the carrier.

REMEDY : If there has been a failure to conform to the warranty, Beckett will, at Beckett’s option, repair, replace or issue a credit or refund for the particular nonconforming product or part. Repair, replacement, credit or refund, at Beckett’s option, is the exclusive remedy in the event of a failure to conform to the warranty. Warranty claims must be made within 3 months after expiration of the applicable Warranty Period.

ADMINISTRATION : Warranty claims must be made by calling Beckett Corporation, Customer Service Dept., telephone 866-466-4319, or by emailing CustomerService@BeckettUS.com. Proof of purchase is required, and a shipping and handling fee applies to all warranty replacements.

INSTALLATION, REMOVAL AND/OR SHIPPING CHARGES : The warranty does not cover any costs associated with the installation, removal or shipping of products subject to warranty claims.

DISCLAIMER AND LIMITATION : THE EXPRESS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE FULL EXTENT PERMITTED BY LAW, BECKETT EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF IMPLIED WARRANTIES CANNOT BE DISCLAIMED, ALL SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY. BECKETT DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL BECKETT BE LIABLE OR RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. BECKETT’S AGGREGATE LIABILITY UNDER THIS WARRANTY OR WITH RESPECT TO ANY PRODUCT COVERED HEREBY, UNDER ANY LEGAL THEORY, SHALL NOT EXCEED THE PURCHASE PRICE PAID

FOR THE NONCONFORMING PRODUCT. THE LIMITATIONS CONTAINED IN THIS PARAGRAPH SHALL NOT APPLY TO INJURY TO THE PERSON. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXCLUSIONS OR LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. APPLICABLE LAW: THE TERMS AND CONDITIONS EXPRESSED HEREIN SHALL BE CONSTRUED AND GOVERNED IN ACCORDANCE WITH THE LAWS OF THE STATE OF TEXAS.

References

• Beckett Corp - Pumps You Can Trust

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>