beckett 7207910-UV9 In Line Non Submersible UV Filter Instructions
- June 10, 2024
- beckett
Table of Contents
beckett 7207910-UV9 In Line Non Submersible UV Filter
Product Information
The UV9-WATT / UV13-WATT is a filter designed to produce clean and clear water by circulating water through the filter and exposing it to UV light. It features an inlet/outlet on each end, and the flow direction can be either way. The maximum pressure is 5 PSI (12′ lift). The product includes a UV Cap with power cord, Cap O-ring, Quartz glass assembly, 9 or 13-watt UV bulb (G23 2 pin), Enclosure housing, Outlet/Inlet O-rings, and Straight adapters require Teflon thread tape for seal. The capacity ratings are a 9-watt-max 650-gallon pond, max flow of 325 gph, and a 13-watt-max 1200-gallon pond, max flow of 600 gph.
The product requires maintenance, which includes wiping the Quartz sleeves with a clean cloth and rinsing with clean water four times a year. The UV bulb should be replaced once every year for optimal water clarity, and a thin layer of Vaseline should be added to the gasket when the UV bulb is changed to prevent moisture from entering the quartz sleeve. The UV should be winterized by removing all plugs from the electrical outlets, allowing it to thoroughly cool, and wiping each part within the unit with a dry clean cloth.
The product comes with a limited warranty. For UV9/UV13 Filter, the warranty period is 1 year from the date of purchase by the original purchaser.
Product Usage Instructions
- Connect the inlet/outlet of the filter to the pump (not included) using straight adapters that require Teflon thread tape for the seal.
- Ensure that the flow direction is correct. It can be either way.
- Plug in the UV Cap with a power cord to a power source.
- Turn on the pump to circulate water through the filter.
- Perform maintenance by wiping the Quartz sleeves with a clean cloth and rinsing them with clean water four times a year. Replace the UV bulb once every year for optimal water clarity, and add a thin layer of Vaseline to the gasket when changing the UV bulb to prevent moisture from entering the quartz sleeve.
- Winterize the UV by removing all plugs from the electrical outlets, allowing it to thoroughly cool, and wiping each part within the unit with a dry clean cloth.
INSTRUCTIONS
This design features an inlet/outlet on each end. Flow direction can be either way.
WARNING!
- Never directly touch the UV bulb – oil from your fingers can shorten bulb life.
- If the UV’s internal components get wet, unplug the unit immediately.
- Do not operate the UV Assembly with a missing or damaged Quartz sleeve.
CAUTION!
- To prevent the risk of electric shock, pull the plug before servicing or replacing the lamp.
- Do not look directly at the UV lamp.
Parts Detail
- UV Cap with power cord
- Cap O-ring
- Quartz glass assembly
- 9 or 13-watt UV bulb (G23 2 pin)
- Enclosure housing
- Outlet/Inlet O-rings
- 90° Elbow adapters (1/2” & 5/8”)
- Straight adapters require Teflon thread tape for the seal
Capacity ratings
- 9-watt-max 650-gallon pond, max flow 325 gph
- 13-watt-max 1200-gallon pond, max flow 600 gph
- Maximum pressure is 5 PSI (12’ lift)
MAINTENANCE
Prior to performing any maintenance always unplug the entire unit. Please read the WARNINGS and CAUTIONS before removing or replacing the UV bulbs.
4 Times A Year:
Wait for the Unit to cool off before wiping the Quartz sleeves with a clean
cloth and rinsing with clean water only – never use chemicals.
Once Every Year:
Replace UV bulb (#4) once every year for optimal water clarity. A thin layer
of Vaseline should be added to the gasket (#2) when the UV bulb is changed to
prevent moisture from entering the quartz sleeve. Moisture should never be
allowed inside the Quartz sleeve
WINTERIZING
Allowing the UV Unit to freeze may result in breakage to the quartz sleeve and bulb. Winterize Pond Products when water temperatures reach 40°F. Keep Products safely packed away until spring when the everyday water temperature rises to 40°F or higher.
To winterize the UV:
- Remove all plugs from the electrical outlets.
- Set the UV Unit aside and allow it to thoroughly cool.
- Dry and wipe each part within the Unit with a dry clean cloth. Remember! Do not touch the bulb with your bare fingers!
- Put the UV Unit back together.
- Store the Unit in a safe place to prevent breaking or falling off a shelf.
LIMITED WARRANTY
Each Beckett Corporation (“Beckett”) product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth below. The Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows:
Product Type or Name/Warranty Period
Pump Models:
- FR Series, DP800-1800, G Series, FC Series …………2 Years
- UL6500A; XL-6500A………………………. 2 Years
- Other Pump Models……………………….. 1 Year
- Pre-Formed Poly Ponds………………………..………. 15 Years
- Waterfall Weir & Skimmer………………………..……… 5 Years
Liner Material:
- 35 mil PVC…………………………………..20 Years
- 40 mil EPDM…………………………………20 Years
- 20 mil PVC…………………………………..15 Years
- UV9/UV13 Filter……………………………. 1 Year
- All Other Beckett Products.……………………………90 Days
APPLICATION:
The warranty covers only properly installed and maintained Beckett products
and is limited to application at normal temperatures 32º F to 86º F, (0º C to
30º C) pumping fluids with a specific gravity up to 1.1 and with a pH range of
5 to 9 (freshwater). Other liquid applications and extreme temperature uses
must be approved in advance by Beckett. The warranty does not apply to or
cover damages or defects caused by external causes, including, but not limited
to, improper or faulty installation or unauthorized modification, lightning,
electrical surges, abuse, misuse or abnormal use or misapplication, including
use in a manner inconsistent with the product’s intended function. The
purchaser is responsible for determining the suitability of the product for
its intended use. If products are damaged in transit, a claim should be filed
with the carrier.
REMEDY:
If there has been a failure to conform to the warranty, Beckett will, at
Beckett’s option, repair, replace or issue a credit or refund for the
particular nonconforming product or part. Repair, replacement, credit, or
refund, at Beckett’s option, is the exclusive remedy in the event of a failure
to conform to the warranty. Warranty claims must be made within 3 months after
the expiration of the applicable Warranty Period.
ADMINISTRATION:
Warranty claims must be made by calling Beckett Corporation, Customer Service
Dept., telephone 866-466-4319, or by
emailing
CustomerService@BeckettUS.com. Proof
of purchase is required, and a shipping and handling fee applies to all
warranty replacements.
INSTALLATION, REMOVAL, AND/OR SHIPPING CHARGES:
The warranty does not cover any costs associated with the installation,
removal or shipping of products subject to warranty claims.
DISCLAIMER AND LIMITATION:
THE EXPRESS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES AND REMEDIES, WHETHER ORAL OR WRITTEN, EXPRESS OR
IMPLIED. TO THE FULL EXTENT PERMITTED BY LAW, BECKETT EXPRESSLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF IMPLIED
WARRANTIES CANNOT BE DISCLAIMED, ALL SUCH IMPLIED WARRANTIES ARE LIMITED TO
THE DURATION OF THE APPLICABLE EXPRESS WARRANTY.
BECKETT DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL BECKETT BE LIABLE OR RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. BECKETT’S AGGREGATE LIABILITY UNDER THIS WARRANTY OR WITH RESPECT TO ANY PRODUCT COVERED HEREBY, UNDER ANY LEGAL THEORY, SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE NONCONFORMING PRODUCT. THE LIMITATIONS CONTAINED IN THIS PARAGRAPH SHALL NOT APPLY TO INJURY TO THE PERSON.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXCLUSIONS OR LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
APPLICABLE LAW:
THE TERMS AND CONDITIONS EXPRESSED HEREIN SHALL BE CONSTRUED AND GOVERNED IN
ACCORDANCE WITH THE LAWS OF THE STATE OF TEXAS.
© 2023 Beckett Corporation 3250 Skyway Circle N. Irving TX 75038
www.BeckettUS.com
Toll-Free: 1-866-466-4319
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>