beckett LV450T Fountain and Pond Pump with LED Light Owner’s Manual

beckett LV450T Fountain and Pond Pump with LED Light

Product Information

The Beckett Corporation produces a range of products including pump models, liners, pre-formed poly ponds, UV filters, waterfall weirs, and skimmers. The warranty period for each product varies from 90 days to 20 years, depending on the product type and model. The LV450T model is a pump and light kit that is designed for use in ponds and fountains. It has a performance of 400GPH at 1ft and a maximum shut off of 8ft. The power requirements are 120V, 60Hz, and 0.7A. The cord length is 16ft.

Product Usage Instructions

1. Read the user manual carefully before using the LV450T pump and light kit.
2. Connect the light by removing the protective stopper on the light cord and pushing the plug into the socket until it is firmly seated. Hand tighten the nut from the plug to the socket.
3. Do not use the pump with an open light connection in the water to prevent water from running down the cord into the electrical outlet.
4. Operate the pump completely submerged to get the best results. Keep the water level above the top of the pump at all times.
5. If less flow is desired, adjust it with the flow control. Never restrict the pump’s intake.
6. Clean the pump regularly by removing the front plate and impeller. Use a small brush or stream of water to remove any debris. Do not remove the pump shaft.
7. If the pump fails to operate, check that it is plugged in and that the impeller is rotating freely.

Beckett pumps are carefully inspected and tested to ensure both safety and operating performance for pond and fountain applications. LED light allow you to highlight features of your water garden and fountain at night under water or in your landscape!
However, failure to follow the instructions and warnings in this manual may result in pump damage and/or serious injury. Be sure to read and save this manual for future reference.

How to connect the Light

Remove protective stopper on the light cord and connect the light cord to the pump by pushing the plug into the socket until it is firmly seated. Hand tighten the nut from the plug to the socket.
DO NOT use the pump with open light connection in the water.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THIS MANUAL FOR FUTURE REFERNCE

WARNING

• The National Electric Code requires that a ground fault circuit interrupter (GFCI) be used in the branch circuit supplying fountain pumps and other pond equipment. See your electrical supplies dealer for this device.
• Do not remove the grounding pin from the plug.
• Do not connect to any voltage other than shown on the pump.
• Do not pump flammable liquids.
• Do not use with water above 86º Fahrenheit (30ºC).
• To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
• Risk of electrical shock. This pump is supplied with a grounding conductor and ground attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
• Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”.
  This will prevent water from running down the cord into the electrical outlet.

CAUTION

• Always disconnect from electrical outlet before handling the pump.
• Do not let the pump run dry.
• Do not lift the pump by the power cord.
• Do not pump heated liquids.
• Operate in freshwater only.
• Operate pump completely submerged for proper cooling.

ATTENTION
order to get best results, operate pump completely submerged. Keep the water level above the top of the pump at ALL TIMES.

CARE AND MAINTENANCE – PUMP

A clogged or dirty intake screen will greatly reduce performance.
If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake.
If less flow is desired, adjust it with the flow control. Never restrict the pump’s intake.
To clean the pump, remove the front plate and the impeller. Use a small brush or stream of water to remove any debris.
CAUTION: The pump shaft cannot be removed.

IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:

• Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
  NOTE: always disconnect from electrical outlet before handling the pump.

• Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.

• Check the intake screen to ensure it is not clogged with debris.

• Remove the pump inlet to access the impeller area. Turn the impeller to ensure it is not broken or jammed.

• If the impeller area is encrusted with minerals or corrosion, gently scrape the area clean.

• If your pump has been idle for an extended period, it may be necessary to apply a drop of light oil to the shaft and spin the impeller by hand until it turns freely.

• Monthly maintenance will add to your pump’s life.

CARE AND MAINTENANCE – LIGHT

• Monthly maintenance will add to your pump’s life.
• Periodically, your light may require cleaning for optimal performance.
• Cleaning should only be done with warm soapy water. Be sure to use biodegradable soap.
• The frequency of cleaning depends upon the conditions of the environment where the light is used.

LIMITED WARRANTY

Each Beckett Corporation (“Beckett”) product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth below. The Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows:

Pump Models:

• FR Series, DP800-1800, G Series, W Series …………2 Years
• UL6500A; XL-6500A …………………….. 2 Years
• Other Pump Models ……………………….1 Year
• Pre-Formed Poly Ponds ………………………..………. 15 Years
• Waterfall Weir & Skimmer………………………..……… 5 Years

Product Type or Name Warranty Period

Liner Material:

• 35 mil PVC …………………………………..20 Years
• 40 mil EPDM …………………………………20 Years
• 20 mil PVC …………………………………..15 Years
• UV9/UV13 Filter ……………………………. 1 Year
• All Other Beckett Products.……………………………90 Days
• APPLICATION: The warranty covers only properly installed and maintained Beckett products and is limited to application at normal temperature 32º F to 86º F, (0º C to 30º C) pumping fluids with a specific gravity up to 1.1 and with a pH range of 5 to 9 (fresh water). Other liquid applications and extreme temperature uses must be approved in advance by Beckett. The warranty does not apply to or cover damages or defects caused by external causes, including, but not limited to, improper or faulty installation or unauthorized modification, lightning, electrical surges, abuse, misuse or abnormal use or misapplication, including use in a manner inconsistent with the product’s intended function. The purchaser is responsible for determining the suitability of the product for its intended use. If products are damaged in transit, a claim should be filed with the carrier.
• REMEDY: If there has been a failure to conform to the warranty, Beckett will, at Beckett’s option, repair, replace or issue a credit or refund for the particular nonconforming product or part. Repair, replacement, credit or refund, at Beckett’s option, is the exclusive remedy in the event of a failure to conform to the warranty. Warranty claims must be made within 3 months after expiration of the applicable Warranty Period.
• ADMINISTRATION: Warranty claims must be made by calling Beckett Corporation, Customer Service Dept., telephone 866-466-4319. Proof of Purchase is required and a $5.00 shipping and handing fee applies to all warranty replacements.
• INSTALLATION, REMOVAL AND/OR SHIPPING CHARGES: The warranty does not cover any costs associated with the installation, removal or shipping of products subject to warranty claims.
• DISCLAIMER AND LIMITATION: THE EXPRESS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE FULL EXTENT PERMITTED BY LAW, BECKETT EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF IMPLIED WARRANTIES CANNOT BE DISCLAIMED, ALL SUCH IMPLIED

WARRANTIES ARE LIMITED
TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY.
BECKETT DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL BECKETT BE LIABLE OR RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. BECKETT’S AGGREGATE LIABILITY UNDER THIS WARRANTY OR WITH RESPECT TO ANY PRODUCT COVERED HEREBY, UNDER ANY LEGAL THEORY, SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE NONCONFORMING PRODUCT. THE LIMITATIONS CONTAINED IN THIS PARAGRAPH SHALL NOT APPLY TO INJURY TO THE PERSON.
Some States do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from State to State.

BECKETT CORPORATION
3321 E. Princess Ann Rd.
Norfolk, Va. 23502
www.beckettus.com
Toll Free: 1-866-466-4319
© 2013 BECKETT CORPORATION All Rights Reserved

References

• Beckett Corp - Pumps You Can Trust

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>