kogan KAMN27F7VA 27 Inch Full HD FreeSync Frameless Monitor User Guide
- June 10, 2024
- Kogan
Table of Contents
kogan KAMN27F7VA 27 Inch Full HD FreeSync Frameless Monitor User Guide
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.
- This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
- Avoid placing the monitor near heaters, stoves, fireplaces, or other heat sources.
- Do not place this monitor in rooms lacking adequate ventilation.
- Do not insert any objects or spray any liquids into the vents.
- Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and cause injury to people within its vicinity.
- Do not place heavy objects on the monitor, its power cord, or any connected cables.
- Do not open the back panel of the monitor as it contains a high-voltage current even when not plugged in.
- Unplug the monitor if it will not be used for an extended period.
- Ensure the monitor is unplugged before cleaning.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States, and other countries.
COMPONENTS
OVERVIEW
- Menu/select button
- Exit/input menu button
- Up/increase volume button
- Down/brightness button
- Power button
- HDMI port
- VGA port
- 3.5mm audio port
- Power port
STAND ASSEMBLY
VESA MOUNT
If mounting to a wall, ensure the stand base and stand stem are disconnected from the monitor. Consult a professional before mounting the monitor.
- With the display side facing down, lay the monitor on a soft cloth to prevent damage.
- Identify the four wall mounting screws on the back of the monitor.
- Mount the monitor as desired with the steps provided with your VESA mount.
Notes:
- Ensure there is at least a 10cm clearance away from all sides of the monitor.
- The mounting hole distance for this monitor is 100mm x 100mm.
- M4 8mm screws are required.
- VESA mount and mounting accessories are not included.
- Images are for reference only.
CONNECTIVITY
Before connecting, ensure the display is switched off.
OPERATION
-
Connect the monitor to your computer via HDMI/VGA.
-
Connect one end of the power cable into the power port of the monitor. Connect the other end into an outlet, then turn the outlet on.
Note: It is recommended that a surge protector with adequate voltage is used if the monitor cannot be directly connected to an outlet. -
Press the power button to turn the monitor on.
On-Screen display (OSD) menu
The OSD menu allows adjustments to various settings for the monitor.
- Press the menu/select button to access the OSD menu.
- Press the up and down buttons to browse through the categories of settings. Press the menu/select button to enter the sub-menu.
- Press the up and down buttons to browse through the sub-menu. Press the menu/select button to enter the adjustment settings of the desired setting.
- Press the up and down buttons to adjust the desired setting. Press the menu/select button to confirm the adjustment.
- Press the exit/input menu button to exit the OSD menu.
OSD menu settings
Below is a list of the settings available that can be adjusted through the OSD
menu.
Adjusting the angle of the monitor
The screen can be tilted forwards up to 5° or backwards up to 15°. To adjust
the angle, hold the edges of the screen with both hands and tilt.
Note: Do not directly touch the screen when tilting.
FreeSync
To use this feature, ensure your hardware has FreeSync capabilities, and that
the graphics drivers are fully up to date.
After connecting the monitor, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in the graphics card menu.
Check your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.
Note: The feature is enabled by default when set to a 75Hz refresh rate.
Input menu shortcut
To quickly change the input source between HDMI and VGA:
- Press the exit/input menu button to access the input menu.
- Press the up and down buttons to highlight the desired input source, then press the menu/select button to confirm.
Brightness shortcut
When outside the OSD menu, press the up and down buttons to adjust the
brightness.
ECO modes
There are various pre-set colour modes suited for various use cases available
on this monitor. These can be accessed using the ECO modes menu. The modes
include the following:
- Standard (suitable for most activities)
- Movie (best suited when watching movies)
- RTS (best suited when playing real time strategy games)
- FPS (best suited when playing first person shooter games)
- Game (best suited for general gaming)
- Text (best suited when reading text)
CLEANING & CARE
Ensure the monitor is turned off and unplugged before cleaning.
- Wipe the body with a slightly damp, clean cloth.
- Wipe the screen with a dry microfibre cloth.
Note: Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
SPECIFICATIONS
Model KAMN242F7VA
Screen size 24″
Aspect ratio 16:9
Backlight E–LED
Brightness 250cd/m2
Panel VA
Resolution 1920 x 1080
Refresh rate 75Hz
Response time 16ms
Viewing angle 178° (H)
178° (V) (typical)
Contrast ratio 3000:1
VESA mounting 100 x 100mm
Colours 16.7M
FreeSync Yes
Signal input x1 VGA, x1 HDMI 1.4
Power DC 12V, 4A
Audio
Audio out Yes
Speakers No
Accessories
Power adapter Yes
HDMI cable Yes
Additional functions
Low blue light Yes
Flicker-free Yes
Physical dimensions
Dimensions (with stand) 613 x 182.2 x 443.8mm
Dimensions (without stand) 613 x 53.1 x 361.4mm
Net weight 3.56kg
Gross weight 4.83kg
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>