CASAINC CA-DH4024FLA 40 Inch W x 24 Inch H Large Rectangular Frameless Anti Fog LED Wall Mounted Instruction Manual

CASAINC CA-DH4024FLA 40 Inch W x 24 Inch H Large Rectangular Frameless

Anti Fog LED Wall Mounted

Product Information

The Smart Light LED Lighted Mirror is available in two versions, clock and standard, with different model numbers. The product comes with warning and safety instructions that should be read carefully before installation. The LED light source of the product is non-changeable, and the product is not meant to be disassembled.

Product Features

• LED Lighted Mirror
• Indoor use only
• Clock and Standard versions available
• Non-changeable LED light source

Product Usage Instructions

1. Inspect the product upon receipt for any transit damage or missing parts.

2. Read and follow all the warning and safety instructions carefully.

3. Ensure the electrical supply is switched off before installation and maintenance.

4. Position the product well away from curtains and fabrics, and never cover the mirror.

5. Regularly check the cord, transformer, and all other parts for
   damage. Do not use the product if any part is damaged.

6. Use suitable tools to install the product, and ensure there are no hidden pipes or cables in the wall before drilling.

7. After opening the package, check the product list to ensure all parts are included.

8. Place the mounting bar against the wall and mark the location. Drill the holes and place the suitable plastic anchors.

9. Screw the mounting bar onto the wall with the screws provided.

10. Connect the mirror with the main supply using the plug provided. Optional to cut the plug directly and connect to electrical wiring if using a wall switch.

11. Hang the mirror onto the mounting bar.

12. The ON/OFF and CCT adjustment button turns blue when connected to the main supply. The button is always on as long as it is connected to the main supply.

Installation and Operating Manual

The clock version

The standard version

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.
WARNING: Risk of Fire and Electric Shock

• All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
• Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
• Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
• Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.

INSTALLATION SAFETY

• Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
• Ensure there are no hidden pipes or cables in the wall before drilling.
• Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION

The light source of this product is non‐changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.

CHECK PRODUCT LIST AFTER OPENING THE PACKAGE

• LED Lighted Mirror: 1 piece
• Screws for the wall: 5 pcs
• Type A Plastic Anchor: 5 pcs
• Type B Plastic Anchor: 5 pcs
• Mounting bar: 1 piece
• Installation Manual: 1 pce

TOOLS YOU MAY NEED

INSTALLATION MANUAL

1. Level and mark the location.
2. Place the mounting bar against the wall and make some marks on the wall.
3. Drill the holes and place the suitable plastic anchors.
4. Screw the mounting bar onto the wall with the screws .
5. Connect the mirror with the main supply.
   • We provide plug with mirrors.
   • Optional to cut the plug directly,then connect to electrical wiring if using wall switch.
   • ATTENTION: PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING!
6. Hang the mirror onto the mounting bar.

OPERATION INSTRUCTION

ON/OFF and CCT adjustment

• Button turns blue when connected to main supply.
• Button always on as long as connecting to main supply.
• Short‐touch the button to turn on/off the mirror.
• Adjusting color temperatures (CCT) between warm white and cool white by long‐touching the button for seconds.
• Finish setting by withdrawing your finger when the color reaches the one you need.
• Optional to be wired to wall switch by ON/OFF memory function.

ON/OFF and Dimmer

• Short‐touch the button to turn on/off the mirror.
• Long touching the button to adjust the brightness (Dimming).

Anti-Fog Function

• The mirror begins to be warm and defog after pressing the defogger button.
• Press again to quit the anti‐fog function.
  • Note: The defogger will stop automatically after 60 minutes of continuous operation to prevent any damage caused by prolonged high temperatures.

Clock/Temperature

(This operation is specific to the clock version)

• Turn off the light to set the clock.
• Long touch button 1or 2 for seconds,the Hour will flash, then short‐touch bu tton1 and 2 to set Hour.
• Wait for seconds after setting up the Hour, then it will automatically switch to the Minute flash.
• Short‐touch button 1and 2 to set up the Minute.
• Wait seconds after you finish the time setting,the time will be saved automatically.
• The clock shows for 5s, and shift to the temperature showing for 2s, then go back to show the clock.
• It automatically displays the indoor temperature by auto sensing through the temperature sensor.
• DO NOT cover the temperature sensor.
• Night light will be auto‐on/off according to the brightness surrounding when the rocker switch is keeping turned on.
• If need turn off the nightlight at night, please turn off the rocker switch manually.

AFTERCARE INSTRUCTIONS

• Clean using a soft dry cloth only when turned off.
• Never use cleaning agents or abrasive materials.
• Do not allow moisture to come into contact with the lamp.
• THANK YOU FOR YOUR SUPPORT
• See Better with Smart Light

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>