CASAINC CA-DH4024VCK Rectangular Frameless Anti Fog LED Wall Mounted Instruction Manual
- June 10, 2024
- CASAINC
Table of Contents
CASAINC CA-DH4024VCK Rectangular Frameless Anti Fog LED Wall Mounted
Product Features
- Extra thick LED light
- Touch switch with memory
- Touch switch dimming function
- Anti-fog pad
Installation and Operating Manual
Two models are available:
- DHJSBM2432VCSKXXX: 24 inches wide and 32 inches high
- DHJSBM4024VCSKXXX: 40 inches wide and 24 inches high
To ensure easy and safe installation, please follow these instructions:
- Read all instructions thoroughly before installing the product.
- Read and take note of all safety, care, and maintenance information.
- Keep this instruction manual for future reference during product operation and maintenance.
Important Tips
Please check the product list after opening the package to ensure that you have all the necessary accessories:
- LED Lighted Mirror
- Screws for wall
- Plastic Anchor
- Mounting bar
- Installation Manual
TOOLS YOU MAY NEED
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you
carefully read through this instruction sheet, refer back to them during
installation to ensure your product is fitted safely and correctly. Keep these
instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations
Installation Steps
- Level and mark the location where you want to install the mirror.
- Place the mounting bar against the wall and make some marks on the wall.
- Drill the holes and place the suitable plastic anchors.
- Screw the mounting bar onto the wall with the screws.
- Plug the power cord onto the outlet on the wall (suitable for the product with plug).
- Connect the wires of the mirror with the main power by the wire connectors:
- BLACK WIRE — POWER SUPPLY L (LIVE)
- WHITE WIRE — POWER SUPPLY N (NEUTRAL)
- GREEN WIRE — POWER SUPPLY E (EARTH)
- Hang the mirror onto the Z bar until they are completelystuck.
Operation Instruction
ON/OFF and Dimmer
To turn on/off the mirror, short-touch the button. To adjust the
brightness, long touch the button (dimming function).
- Short-touch the button to turn on/off the mirror.
- Long touching the button to adjust the brightness.
Anti-fog Function
To activate the anti-fog function, press the defogger button. The mirror
will become warm and defog. Press again to quit the anti-fog function.
- Mirror begins to be warm and defog after pressing the defogger button.
- Press again to quit the anti-fog function
Night light
If your product has a night light function, use the rocker switch to turn
on/off the 3000K nightlight. The night light will be auto-on/off according to
the brightness surrounding when the rocker switch is keeping turned on. If you
need to turn off the nightlight at night, please turn off the rocker switch
manually. Thank you for choosing our product!
- Night light will be auto‐on/off according to the brightness surrounding when the rocker switch is keeping turned on.
- If need turn off the nightlight at night, please turn off the rocker switch manually.
For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all safety, care and maintenance information. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE
THANK YOU FOR CHOOSING US.