CASAINC 10060-CAB Solid Wood Bath Vanity with Carrara Instruction Manual
- June 10, 2024
- CASAINC
Table of Contents
10060-CAB Solid Wood Bath Vanity with Carrara
Instruction Manual
10060-CAB Solid Wood Bath Vanity with Carrara
Prior to installation please check received items against the Packing List
Please report any missing items to your local dealer immediately.
Protect all surfaces from sharp objects, high heat sources, direct prolonged
sunlight and chemical hazards . Professional installation recommended !
PACKING LIST (Please refer to order per retailer )
REQUIRED TOOLS DRAWER SLIDER ATTACHMENT AND DETACHMENT
INSTALLATION AND ADJUSTION OF HINGE Product Features:
Extra thick LED light Touch switch with memory Touch switch dim function Anti-
fog
LED Mirror For easy and safe installation, please refer to the following:
Read all instructions thoroughly before installing the enclosed product.
Read and take note of all safety, care and maintenance information.
PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT
OPERATION AND MAINTENANCE.
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you
carefully read through this instruction sheet, refer back to them during
installation to ensure
your product is fitted safely and correctly. Keep these instructions for
future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors
that can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
PRODUCT DESCRIPTION & INFORMATION
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
| LED Lighted Mirror | 1pcs |
|---|---|
| installation Manual | 1pcs |
| Z-bar | 1pcs |
| Wall Mount Screw | 7 pcs (One as a Spare part) |
| Drywall Anchor | 7 pcs (One as a Spare part) |
PRODUCT DESCRIPTION
INSTALLATION PROCESS
OPERATION PROCESS
Button 1:
Short Press to turn on/off the light .
Press the switch button and hold on for 3-5seconds to active the dimmer
function. The first long press, brightness from strong to weak; Second long
press, brightness from weak to strong. These two operations loop in turn.
Button 2:
Gently press to change the color temperature.
First press causes the neutral light ,it is mixed light by 3000K+6400K; Second
press causes the cool white light ,it is 6400K . Third press causes the warm
yellow light ,it is 3000K . The three operations loop in turn.
Button 3:
First short press ,anti-fog function works . Second short press ,anti-fog
function stops . The two operations loop in turn .
- All diagrams are for reference only. All model dimensions and proportions position will vary.
LED Mirror Power Source FAQ
Scenario1 ©
(Direct Wired)
This is the most common way to connect the mirror. The LED light & anti fog
pad are both controlled by the built-in touch switch on the mirror.
*The LED light is dimmable.
Scenario2 ©
(Wall Switch)
By doing so, the mirror is now bridged to the wall switch. In order to turn on
the mirror, the wall switch needs to be on. The touch switch can be used to
turn on the LED mirror and anti-fog pad. The mirror shuts down once the walls
itch is flipper to OFF.
Scenario 3 ©
(Wall Dimmer Switch — Not Accepted) This is a scenario that is not acceptable.
There is no work around for our mirror. Do not try this way as it will damage
the LED driver. DEAR CUSTOMER,
Thank you very much for using our products. We believe that you will like the
100% quality products that CASAINC bring to you. We will grateful if you could
leave us a positive feedback. The satisfaction of customer is our goal, if
there is anything we can do to improve your shopping experience, please
contact us!
Thanks again for your purchase sincerely, welcome to your next visit.
Get More Help by
Contact Phone Number : 001 888-257-3857
Service Contact : service@casainc.com
You can also view more products at
WWW.casainc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>