Inventum IOM6072RK-02 Multifunctional Built In Oven User Manual
- June 10, 2024
- INVENTUM
Table of Contents
Inventum IOM6072RK-02 Multifunctional Built In Oven User Manual
Introduction
HOW TO USE THIS DOCUMENT
- Read this document completely. Make sure that you know and understand all the instructions.
- Obey the safety instructions to prevent injury and/or damage to the appliance and its surroundings.
- Do the procedures completely and in the given sequence.
- Keep this document in a safe area for future use. This document is a part of the appliance.
SYMBOLS USED IN THIS DOCUMENT
Safety symbol | Function | Description |
---|---|---|
Warning | “Warning” means that injury or death is possible if you do not |
obey the instructions.
| Caution| “Caution” means that damage to the appliance is possible if you do
not obey the instructions.
| Note| “Note” is used to give
additional information.
Safety
SAFETY INSTRUCTIONS
-
Read the instructions before operating the appliance and keep the instructions for future use.
-
The appliance is only intended for domestic use within a home. Do not use corrosive chemicals or vapors in this appliance. This appliance is specifically designed to heat. It is not designed for industrial or laboratory use.
-
Do not place any object between the door of the appliance. Do not allow soil or cleaner residue to accumulate on the sealing surfaces.
-
If the door or the door seal is damaged, the appliance must not be operated until it has been repaired by a competent person.
-
Do not heat liquids and other foods in sealed containers because the container can explode.
-
Only a competent person is allowed to carry out any service or repairs that involve removing the cover.
-
Keep the appliance out of reach of children. Children do not understand the danger of handling electrical appliances.
-
This appliance cannot be used by children from 0 to 8 years. This appliance can be used by children aged from 8 years and above if they are continuously supervised. The appliance can also be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8 years.
-
Cleaning and maintenance cannot be done by children.
-
Children must not play with the appliance.
-
Only use materials that are suitable for use in ovens.
-
The appliance must be cleaned regularly and any food deposits must be removed.
-
When you see smoke, switch off and unplug the appliance. Keep the door closed in order to stifle any flames.
-
Do not place items on the door of the appliance.
-
Install the appliance only in accordance with the installation instructions.
-
Always carry out regular checks of the appliance and the mains cable to make sure that no damage is evident. Should there be any signs that the appliance or the mains cable is damaged in the slightest degree, the entire appliance should be returned to the Customer Service Department. For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.
-
Only use and store the appliance indoors.
-
Do not use the appliance near water, in a wet basement/garage or near a swimming pool.
-
Avoid touching hot surfaces, especially the inside of the appliance.
-
Do not cover any vents of the appliance.
-
Do not bend the mains cable and keep it away from the heated surface.
-
Failure to keep the appliance clean could lead to deterioration of the surface that could adversely affect the life of the appliance and possible result in a hazardous situation.
-
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
-
The appliance can only be used when it is built in kitchen furniture.
-
Never leave the appliance unattended when in use.
-
For your own safety, only use the accessories and spare parts from the manufacturer that are suitable for the appliance.
-
Never unplug the appliance from the mains socket by pulling the mains cable.
-
Always make sure that your hands are dry before handling the mains cable, mains plug or switch.
-
Should you decide not to use the appliance anymore, make it inoperative by cutting the mains cable after removing the mains plug from the mains socket. Make all potentially dangerous parts of the appliance harmless, particularly for children who might be tempted to play with it.
-
Never immerse any part of the main body, lid, mains cable and mains plug in water or any other liquid to protect against electrical hazards.
-
If the appliance is used for other purposes than intended, or if it is not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the appliance or other things are not covered by the warranty.
-
Never use a pressure cleaner or steam cleaner to clean the appliance.
-
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
-
Do not cover the bottom of the appliance with aluminium foil. The aluminium foil stops the heat and causes poor results and damage to the enamel.
-
The appliance has a fan that continues after operation.
-
Only a qualified installer is allowed to install the appliance.
-
In case of incorrect installation or connection, the warranty becomes invalid.
-
If the mains cable is damaged, it may only be replaced by the manufacturer, its service organisation or similarly qualified persons, in order to prevent hazardous situations.
-
The electrical connection must meet national and local regulations.
-
The mains socket and mains plug must always be within reach.
-
The appliance may not be connected to the mains supply via a power strip or extension cable. If this is not observed, the safety of the appliance cannot be guaranteed.
-
The appliance must be earthed.
-
Only connect the appliance to alternate current, to an earthed mains socket. Make sure that the voltage in your home corresponds with the voltage printed on the type plate of the appliance.
-
Make sure that the appliance is switched off before you replace a lamp.
Description
INTENDED USE
The appliance is intended to be used for preparing food. Do not use the appliance for any other purpose than described in this document.
BUILT-IN OVEN
(Figure 1)
A Insert levels
B Door
C Door handle
D Control panel
E Baking tray
F Grill rack
Item | Function |
---|---|
Insert levels | Refer to section ‘Using the insert levels’ |
Door | To open the appliance. |
Door handl | To open and close the door |
Control panel | Refer to section ‘Control panel’. |
Baking tray | To cook food. Use the baking tray for cake rolls and roasting. |
Grill rack | To cook food. Use the grill rack for grilling meat and for |
toasting bread.
CONTROL PANEL
(Figure 2)
A Oven function knob
B Display
C Temperature indicator
D Temperature knob
E Child-lock button
F Up button
G Down button
H Clock button
Item | Function |
---|---|
Oven function knob | To select an oven mode. |
Display | • To show the current time or timer.• To show an indicator |
for the selected timer (kitchen timer, cooking time).
Temperature indicator| To show if the appliance is preheating. The indicator
is on if the heating elements are on.
Temperature knob| To select the temperature.
Child-lock button| To activate/deactivate the child lock.
Up button| To adjust the settings.
Down button| To adjust the settings.
Clock button| To set the clock or a set timer.
Installation
SAFETY INSTRUCTIONS FOR INSTALLATION
- Safety during use can only be guaranteed if installation was done correctly and according to the instructions. The installer is liable for damage caused by incorrect installation.
- The electrical installation must be carried out by a qualified electrician. The electrician must comply to national and local regulations.
- The appliance has protection class I and may only be used in combination with an earthed connection.
- The appliance must be connected to a permanent installation in which provisions for switching off are integrated, in accordance with the installation instructions.
- Make sure that the mains cable does not get jammed during installation or is running along sharp edges. The mains cable must be placed in such a way that no contact is made with hot parts of the appliance.
- The connection point, mains socket and/or mains plug must always be accessible.
- The kitchen furniture in which the appliance is installed must be heat resistant to at least 90°C. This also applies to the doors or front of the furniture.
- Make sure that the kitchen furniture in which the appliance is installed is firmly attached, for example by fastening the furniture to adjacent elements.
- In case of incorrect installation or connection the warranty becomes invalid.
- Changes to the appliance, including replacing the mains cable, must be carried out by a certified installer.
- Make sure that there is sufficient ventilation and fresh air around the appliance.
UNPACKING
-
Remove the packaging.
Caution: Make sure that you remove the sticker from the door. -
Examine the appliance for damage.
-
Make sure that the voltage is the same as on the type plate.
PREPARING FOR INSTALLATION
(Figure 3)
The minimum dimension for B1 is 585 mm and the maximum dimension is 595 mm.
Note: Make sure that the kitchen furniture is prepared according to the dimensions of the appliance.
- Make sure that the kitchen furniture is prepared according to the correct dimensions.
Warning: Two persons are required to install the appliance.
Caution: Make sure that the mains cable does not get jammed during
installation or is placed on top of the appliance.
Caution: Do not cover the opening between the kitchen furniture and the
top of the appliance. The opening is required for ventilation.
Note: It is possible to
connect the appliance to the mains supply before positioning the appliance.
Procedure
(Figure 4)
-
Put the appliance (A) in the center of the kitchen furniture.
Caution: Make sure that there is a minimum space of 2 mm between the appliance and the walls of the kitchen furniture. -
Open the door (E) of the appliance.
-
Place the appliance in the kitchen furniture.
-
Install the plugs (B).
-
Fasten the appliance to the kitchen furniture. Use the screws (D).
-
Install the covers (C).
-
Close the door.
-
Connect the appliance. Refer to section ‘Connecting the appliance’
CONNECTING THE APPLIANCE
- Make sure that the voltage in your home corresponds with the voltage of the appliance.
- Make sure that the electrical system in your home is supplied with a 16 Amp fuse.
- Use the supplied mains cable to connect the appliance to the mains socket.
After connecting, the clock shows ‘0:00’, and the clock icon will flash on the display. Touch any button to quit.
REPLACING THE MAINS CABLE
If necessary, you can replace the supplied mains cable with a longer or different mains cable.
Warning: Replacing the mains cable must be carried out by a qualified person.
Note: Make sure that the new mains cable has a minimum core cross section of 1.5 mm2 and a length of 1 m. If you use a mains cable that is too short, you cannot connect the appliance and position it in the kitchen furniture before connecting the appliance to the mains socket.
(Figure 5)
- Find the terminal box at the rear of the appliance.
- Carefully push the pins (B) to open the cover (A). Use a screwdriver.
- Remove the screws (C).
- Place the new mains cable (D) in the terminal box.
- Connect the wires according to the wiring diagram.
- Install the screws.
- Close the cover.
Operation
PREPARING FOR OPERATION
-
Remove the accessories from the appliance.
-
Clean the appliance and the accessories. Use warm water and a mild cleaning agent.
-
Rinse the appliance and the accessories thoroughly with water.
-
Dry the appliance and the accessories.
-
Use the oven for 60 minutes with a temperature of 250°C to remove any production residues, such as oil and to prevent bad smells. Refer to section ‘Using the oven’.
Warning: Make sure that the room is properly ventilated. -
Let the appliance cool down.
-
Clean the appliance again. Use warm water and a mild cleaning agent.
-
Rinse the appliance thoroughly with water.
-
Dry the appliance.
-
Install the guide racks. Refer to section ‘Installing the guide racks’
INSTALLING THE GUIDE RACKS
(Figure 6)
(Figure 7)
- Identify the guide racks for the left side (A) and the right side (B).
- Push the guide rack (C) in the opening at the rear of the appliance.
- Push the guide rack in the opening at the front of the appliance.
SETTING THE CLOCK
Note: This procedure is valid for setting the clock and adjusting the clock.
- Touch the clock button to select the clock function. The clock icon will sh.
- Touch the up button or the down button to adjust the time. Touch the buttons one time to increase the time per second or hold the buttons for 3 seconds to increase the time faster.
Note: The range is 24 hours.
Note: If there is no operation within 5 seconds, the current time will be displayed and the clock icon goes off.
SETTING THE KITCHEN TIMER
-
Touch the clock button one time. ‘0:00’ flashes on the display and the indicator (alarm) is on.
-
Touch the up button or the down button to adjust the time. Touch the buttons one time to increase the timer per second or hold the buttons for 3 seconds to increase the time faster.
Note: The value must be between ’00:01′ and ’23:59′. -
Wait 5 seconds until the settings are saved. The display shows the indicator and the timer counts down. When the kitchen timer finishes, the display shows ‘0:00’ and you will hear a sound signal 4 times every 5 seconds. The appliance does not automatically switch off.
Note:
If you do not operate the appliance after the kitchen timer has finished, the
sound signal will automatically stop after 2 minutes.
SETTING THE COOKING TIME
-
Touch the clock button two times. ’00:00′ flashes on the display and the indicator (l–>I) is on.
-
Touch the up button or the down button to adjust the time. Touch the buttons one time to increase the time per second or hold thebuttons for 3 seconds to increase the time faster.
Note: The value must be between ‘00:01’ and ’23:59’. -
Wait 5 seconds until the settings are saved. The display the shows indicator and the timer counts down. When the cooking time finishes, the display shows ‘0:00’ and you will hear a soundsignal 2 times every 5 seconds. Touch any button to stop the sound signal. The appliance switches off automatically.
Note: If you do not operate the appliance after the kitchen timer has finished, the sound signal will automatically stop after 2 minutes.
USING THE INSERT LEVELS
The appliance has 5 insert levels to ensure that you can partly remove the
grill rackor baking tray without tilting. As a result, you can safely remove
the dish from the appliance and the grill rack or baking tray will not
accidentally fall from the appliance.
Caution: For safety reasons, the baking tray should be placed in one of the insert levels. Do not place the baking tray on the bottom of the appliance.
(Figure 8)
- Use the guide racks to correctly place the grill rack (A) or baking tray (B) in the appliance.
- Make sure that the accessories are fully placed in the appliance and that they do not make contact with the door
USING THE OVEN
For an overview of the available oven modes, refer to section ‘Oven modes’.
- Turn the oven function knob to the desired oven mode.
- Turn the temperature knob to the desired temperature.
- Set the cooking time. Refer to section ‘Setting the cooking time’.
Note: When preheating is finished, the temperature indicator goes off.
CHANGING THE TEMPERATURE DURING COOKING
You can change the temperature at any time.
- Turn the temperature knob to the desired temperature.
CHANGING THE COOKING TIME DURING COOKING
You can change the cooking time at any time.
- Touch the clock button.
- Touch the up button or the down button to adjust the time
CHANGING THE OVEN MODE DURING COOKING
You can change the oven mode at any time.
- Turn the oven function knob to the desired oven mode.
Note: If you turn the oven function knob to the modes ‘lamp’ or ‘defrost’, the heating elements will be switched off.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
When the child lock is activated, you cannot operate the touch buttons
Activating the child lock
- Touch and hold the child-lock button for 3 seconds to activate the child lock. The clock display shows a lock.
Deactivating the child lock
- Touch and hold the child-lock button for 3 seconds to deactivate the child lock. The clock display no longer shows a lock.
STOPPING THE APPLIANCE
- Turn the oven function knob to the off position ‘o’.
- Turn the temperature knob to the off position ‘o’.
Cleaning and maintenance
CLEANING THE APPLIANCE
Warning: Make sure that the appliance is switched off and cooled down before cleaning.
Caution: Do not use a pressure cleaner or steam cleaner to clean the appliance.
Caution: Do not use abrasive cleaning agents or sharp scrapers.
Note: You can remove the guide racks and the door to easily clean the appliance. Refer to sections ‘Removing the guide racks’ and ‘Removing the door’.
-
Clean the inside of the appliance after every use. Use a damp cloth.
-
In case of heavy dirt, clean the inside of the appliance with warm water and a mild cleaning agent. Thoroughly rinse and dry the inside after cleaning.
Note: Leave the door open slightly to make sure that the appliance dries completely. -
Clean the accessories. Use warm water and a mild cleaning agent. Dry the accessories after cleaning.
-
Clean the outside of the appliance. Use a damp cloth or sponge.
-
In case of heavy dirt, clean the outside of the appliance with a mild detergent.
Note: The cover of the door can become discolored or the glass inside the door can be dirty. You can remove the cover for thorough cleaning. Refer to section ‘Removing the cover of the door’. -
If necessary, clean the cover of the door and the glass inside the door. Use warm water and a mild cleaning agent. Dry the cover after cleaning.
REMOVING THE GUIDE RACKS
(Figure 9)
- Pull the guide rack (A) from the opening at the front of the appliance.
- ull the guide rack from the opening at the rear of the appliance.
- Remove the guide racks.
- After cleaning, install the guide racks again. Refer to section ‘Installing the guide racks’
REMOVING THE DOOR
Warning: Risk of injury. Keep your hands away from the hinges.
(Figure 10)
-
Open the door (A) of the appliance.
Caution: Do not use a sharp object to open the levers. This can cause damage to the appliance. -
Open the levers (B) on each side of the door.
-
Close the door halfway.
-
Remove the door. Use both hands.
-
After cleaning, install the door again. Refer to section ‘Installing the door’.
INSTALLING THE DOOR
Warning: Risk of injury. Keep your hands away from the hinges.
(Figure 11)
-
Carefully place the door (A) in the appliance.
Caution: Make sure that the hinges are placed correctly. If the hinges are placed incorrectly, you cannot open the door. -
Open the door.
-
Close the levers (B) on each side of the door.
-
Close the door of the appliance.
REMOVING THE COVER OF THE DOOR
(Figure 12)
-
Push the pins (A) on each side of the door.
-
Remove the cover (B).
Note: When the cover is removed, the glass panels inside the door are also accessible. -
After cleaning, install the cover again. Refer to section ‘Installing the cover of the door’.
INSTALLING THE COVER OF THE DOOR
(Figure 13)
Caution: Make sure that the glass panels are installed correctly
- Carefully push the cover (A) in the door until you hear a click.
CLEANING THE KNOBS
Caution: Do not clean the knobs in a dishwasher.
Caution: Do not use an abrasive cleaning agent.
- Pull the knobs to remove them.
- Clean the knobs. Use warm water and a mild cleaning agent.
- Dry the knobs. Use a soft cloth.
- Carefully push the knobs back in the control panel.
REPLACING THE LAMP
Warning: Make sure that the appliance is cooled down.
Procedure
(Figure 14)
- Turn the glass cover (A) counter-clockwise to remove it.
- Carefully pull the lamp (B) to remove it.
- Replace the lamp.
- Install the glass cover.
Closing requirements
- Connect the appliance.
Extra information
OVEN MODES
Oven mode | Description | Temperature range |
---|---|---|
**** | Lamp | Used for activating and deactivating the lamp without switching |
on the appliance.The lamp is activated during all oven modes, except the eco
mode.| –
| Defrost| Used for slowly defrosting food. The fan circulates the air
inside to appliance to defrost the food. The appliance does not use heat in
this mode.| –
****| Double grill + fan| Used for grilling a layer of food or to gratin
dishes.| 50-250°C
| Double grill| Used for grilling large portions of meat.| 50-250°C
| Single grill| Used for grilling small portions and for browning food.
Place the dish in the middle of the appliance.| 50-250°C
| Conventional + fan| Used for baking at several levels, for example
baking trays with cookies. The fan distributes the heat from the heating
elements evenly throughout the appliance.| 50-250°C
****| Conventional| The upper and lower heating elements are both
used for perfect baking results, such as cake and puff pastry.| 50-250°C
****| Heat from below| Used for extra browning of pizza bottoms, quiches
and pies. The heat comes from the lower heating element.| 50-250°C
****| Hot air| Used for baking at several levels, for example baking trays
with cookies. The heat comes from the heating elements at the rear of the
appliance.| 50-250°C
Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
- Try to find a solution for the problem with the help of the troubleshooting table.
- If you cannot find a solution for the problem, contact the Inventum servicedienst
TROUBLESHOOTING TABLE
Problem | Possible Cause | Possible solution |
---|---|---|
The appliance does not start | There is no power supply | Do a check on the |
fuse, if necessary replace the fuse
The power is interrupted.| Do a check if the power in the kitchen is working.
A knob is loose| The knob is not installed correctly.| 1. Carefully push the
knob back in the control panel. 2. Do a check if you can easily turn the knob
A knob does not turn.| There is dirt under the knob| Clean the knob. Refer to
section ‘Cleaning the knobs’.
An oven mode with fan is selected, but the fan does not work continuously| The
fan only works when necessary for optimal heat distribution.| –
After cooking, the appliance makes a noise and there is an air flow around the
control panel| The fan works to cool down the appliance.| The fan switches off
automatically.
The dish is not cooked thoroughly in the suggested time.| The selected
temperature differs from the suggested temperature| Use the suggested
temperature of the recipe.
The portion size differs from the recipe.| Adjust the temperature according to
the portion size.
The dish did not brown evenly.| The selected temperature is too high.| Use the
suggested temperature of the recipe.
The used insert level is too high| Place the dish on a lower insert level.
Refer to section ‘Using the insert levels
The lamp does not work| The lamp is broken| Replace the lamp. Refer to section
‘Replacing the lamp’.
The appliance does not become hot.| The door is not closed correctly.| Make
sure that the door is closed completely
There is no oven mode selected.| Make sure that you set the oven mode
There is no temperature selected.| Make sure that you set the temperature.
The temperature indicator is off.| There is no oven mode selected.| Make sure
that you set the oven mode.
General terms and conditions of service and warranty
We do not need to remind you of the importance of service. After all, we develop our products to a standard so that you can enjoy them for many years, without any concerns. If, nevertheless, there is a problem, we believe you are entitled to a solution straight away. Hence our products come with an exchange service, on top of the rights and claims you are entitled to by law. By exchanging a product or part, we save you time, effort and costs.
2-year full manufacturer’s warranty
- Customers enjoy a 2-year full manufacturer’s warranty on all Inventum products. Within this period, a faulty product or part will always be exchanged for a new model, free of charge. In order to claim under the 2-year full manufacturer’s warranty, you can either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at ‘https://www.inventum.eu/service-aanvraag‘.
- The 2-year warranty period starts from the date the product is bought.
- In order to claim under the warranty, you must produce a copy of the original receipt.
- The warranty applies only to normal domestic use of Inventum products within the Netherlands.
References
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>