BORMANN BLF1500 10W Power Projector with Motion Sensor Instruction Manual
- June 10, 2024
- BORMANN
Table of Contents
BLF1500 – BLF1600 – BLF1700 – BLF1800
Art Nr:02680 – 026877 – 026891
BLF1500 10W Power Projector with Motion Sensor
Connecting the Terminal Block
Connect main supply (brown – live, blue – neutral, green/yellow – earth) into terminal block making sure all connections are tight. Make sure the cables are the right colour and match the phases and grounding by checking with the appropriate instrument. Seek the help of a professional electrician in case of uncertainty.
Installation Instructions:
- Ensure mains supply is switched off.
- Insert masonry plugs into mounting surface.
- Fit mounting plate (1) onto mounting surface with self-tapping screws (2).
- Connect main supply wires to terminal block (3) making sure all connections are tight.
- Reconnect power.
Warning!
Lamp replacement:
Disconnect power and allow fitting to cool down before cleaning or changing
the lamp.
Technical Data
| Model | Power | Colour Temperature | Luminosity | Luminous Efficacy | Other Specs |
|---|---|---|---|---|---|
| BLF1500 | 10W | 4000K | 800Lumen | 80Lm/W | AC 175-265V, Ra>70, IP65, PF>0.9, |
| BLF1600 | 20W | 4000K | 1600Lumen | 80Lm/W | AC 175-265V, Ra>70, IP6S, PF>0.9, |
| BLF1700 | 30W | 4000K | 2400Lumen | 80Lm/W | AC 175-265V, Ra>70, IP6S, PF>0.9, |
| BLF1800 | SOW | 4000K | 4000Lumen | 80Lm/W | SAC 175-265V, Ra>70, IP65, >0.9, |
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Motion Sensor Functions
The motion sensor has 3 control knobs located on the underneath of the motion
sensor. The function of each knob is de-scribed below. The setup procedure
below describes the process of configuring the motion so that operates
correctly .
Sens (Sensitivity)
This knob controls the sensitivity of the motion sensor. Rotating the knob
fully clockwise configure he motion sensor so that it is more sensitive to
moving objects. If the knob is set to the middle the motion sensor will detect
a human adult and not sense the moment of a dog or cat.
Lux (Light Level)
This knob determines at what light levels the motion sensor will become
active. Rotating the knob fully clockwise will enable the motion sensor to
operate in the daytime and if set to fully counter clockwise the motion sensor
will only be active during complete darkness.
Time
This knob determines how long the flood light will stay on when the motion
sensor is triggered. The maximum time setting is approximately 5 minutes and
the minimum time setting is approximately 5 seconds .
Setup
- Install and apply power to the flood light
- Rotate the LUX knob fully clockwise so that the flood light can operate during daytim and night time .
- Rotate the TIME knob fully counter clockwise so that time setting is set to minimum (5 seconds)
- Turn the SENS knob fully counter clockwise so that motion sensor is set to maximum sensitivity.
- Aim the motion sensor to the desired target area .
- Have a person stand in approximately in the centre of the target area and get them move slowly. Normally moving ones arms up and down is sufficient.
- Slowly rotate the SENS knob clockwise until the flood light turns on
- Adjust the LUX knob so that the motion sensor is activated at the desired light level for example dusk or at full darkness.
- Turn the TIME knob so that flood light stays for the desired time after the motion sensor is activated .
****DISPOSE OFPACKAGINGRESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE
WWW.BORMANNTOOLS.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>