ReaLPOWER PB-10000 SE Powerbank Instruction Manual

Power bank PB-10000 SE
10.000 mAh Power bank and 30 cm USB-A > USB-C Kabel

Instruction Manual

PB-10000 SE Power bank

Thank you for choosing a Real Power product! Charge your smartphone and tablet anytime and anywhere with the PB-10000 SE power bank. With the USB-C output, you can recharge your smartphone and tablet extremely quickly.
Please read these instructions for use and the safety instructions carefully and conscientiously before use.

Charging the power bank PS-10000 SE:

A short press on the On/Off switch indicates the charging status via LEDs.

1. LED lights up = 0% – 25%
2. LEDs light up = 26% – 50%
3. LEDs light up = 51% – 75%
4. LEDs light up = 76% – 100%

To charge the power bank, simply connect the supplied USB-A > USB-C charging cable to the USB-C port of the power bank (IN/OUT) and via an AC adapter to a power outlet. The power bank now automatically charges itself completely. The integrated overcharge protection ends the charging process as soon as the power bank is fully charged. The adapters and cables used to charge and discharge the power bank must be LPS and EN 60950-1:2006/A2:2013 compliant. The charging current should be 5V / 2,100 mA.

The charging of devices:

To charge your smartphone or other mobile device, simply connect your charging cable to one of the charging ports (USB-A or USB-C) and your mobile device. Please note that the USB-C port can be used to charge the power bank and devices, the port is input and output.

Technical data

– Protection against excessive charging and discharging
– LED charging status indicator
– Dimensions: 98,5 x 64,5 x 26,5 mm / 224 g Scope of delivery: Real Power PB- 10000SE power bank, USB-A>USB-C cable (30 cm), instruction manual, service card

Intended Use

This power bank is intended exclusively for powering devices with an operating voltage of 5 V DC (mobile phones, tablets, etc.). Any other use or use beyond this is considered improper use and can lead to damage and injury. Claims of any kind due to damage from improper use are excluded.

Safety instructions:

– The PB-10000 SE is equipped with lithium-polymer batteries which are reaching their full capacity only after being fully charged several times.
– Do not charge any devices with the power bank if it is charging itself.
– Only use suitable power adapters (observe voltage and charging current specifications)
– Protect the power bank from damage – do not continue to use it after a drop/fall.
– Please note that, despite advanced technology, power banks only have a certain number of charging cycles and may lose capacity afterwards.
– Do not open the power bank
– in case of defects, please contact our support or a specialist dealer.
– Charge the power bank every 3 months when not in use to maintain full performance.
– Do not store the power bank in a hot or humid environment
– The ambient temperature of the power bank should be between 0°C and 40°C.
– Also, do not expose the power bank to direct sunlight. Protect the product from open fire. There is a risk of explosion!
– Do not bridge any contacts – risk of short circuit – If liquid leaks from the power bank
– Do not touch. Risk of injury from chemical burns.
– Disconnect the power bank from the power supply unit after charging.
– Dispose the used power bank in accordance with the legal regulations.

Only in Germany
Kunden Hotline 0800 85 87 66 24
RMA-Technik Hotline 0800 85 87 66 762
International
costumer hotline / conseil-client
+49 (0) 2404 918-100
service hotline
+49 (0) 2404 918-132
Kontakt
August-Schmidt-Str.7 I 52477 Alsdorf I Germany
Mail: info@realpower.de
Internet: www.realpower.de
Vorstand: Achim Heyne
Vorsitzender des Aufsichtsrates:
Dipl.-Kaufmann Andreas
Printz Sitz der Aktiengesellschaft: Aachen
Registergericht: Amtsgericht Aachen
Registernummer: HRB 8697
Umsatzsteuer-Identifikationsnummer: DE217697553

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>