ROCCAT Kain 200 Aimo Driver Software Download For Windows Installation Guide
- June 5, 2024
- ROCCAT
Table of Contents
- ROCCAT Kain 200 Aimo Driver Software Download For Windows
- QUICK START GUIDE / CONNECTING THE KAIN
- TECHNICAL FACTS
- DEFAULT BUTTON ASSIGNMENT (no driver installed)
- INSTRUCTIONS
- Disposal information
- Technical support
- FCC CAUTION:
- GENERAL SAFETY GUIDELINES AND INTENDED USE
- BATTERY SAFETY GUIDELINES
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ROCCAT Kain 200 Aimo Driver Software Download For Windows
QUICK START GUIDE / CONNECTING THE KAIN
-
Start by plugging the wireless dongle into any free USB port on your PC
-
To improve connectivity consider using the included extender plug and charging cable so that the wireless dongle can be positioned closer to the Kain 200
-
Flip the Kain over and hit the “on” switch
-
Press the “pairing” button
-
Download and install the ROCCAT Swarm software from www.roccat.com/swarm-software and follow the on-screen instructions.
TECHNICAL FACTS
TECH SPECS KAIN 200/202
- ROCCAT ® Owl-Eye 16K sensor with up to 16,000dpi
- Default DPI steps: 400, 800 (default), 1200, 1600, 3200
- 2.4GHz frequency
- 1000mAh battery
- 1000Hz polling rate
- Distance Control Unit
- 40G acceleration
- ARM Cortex-M0 48MHz
- 512 kB onboard memory
- Angle Snapping: Adjustable on/off
- 1ms response time
- Light 105g weight
- Operating Temperature: 0~40 °C
- I nput Rating:
5.0 Vdc, 500mA (Mouse)
5.0 Vdc, 100mA (Dongle)
Should you need assistance …
Our support team is ready to help you with any technical questions. Just send
an e-mail to support@roccat.com or visit our website at:
WWW.ROCCAT.COM/SUPPORT
SYSTEM REQUIREMENTS
- Windows® 7, 8 and 10 (software support)
- USB 2.0 (or higher)
- Internet connection (for driver software)
DEFAULT BUTTON ASSIGNMENT (no driver installed)
STANDARD
- Left mouse button
- Right mouse button
- Universal scroll
- Scroll up
- Scroll down
- IE Forward
- IE Backward
- DPI Cycle
INSTRUCTIONS
- Plug the USB connector on your ROCCAT® Kain into any free USB port.
- Boot your computer and connect to the Internet.
- Navigate to www.roccat.com/roccat-swarm and download the latest version of Swarm.
- Start the software installation process and follow the on-screen instructions.
Disposal information
The crossed-out wheelie-bin symbol means that you must not dispose of this
product toge-ther with unsorted household waste. As electrical devices can
contain harmful substances which may cause environmental damage or harm to
your health if not disposed of correctly, please dispose of these products
separately. As the end user, you are required by law to dispose of used
electrical equipment at an official recycling point. For information about
local recycling points, contact your local authority, civic amenity site or
the business where you purchased this product. By disposing of electrical
products at an official recycling point, you are doing your bit to ensure
equipment is recycled correctly and professionally, and our environment is
protected.
When purchasing a new product, the retailer will let you hand in old products
and dispose of them free of charge provided the product you are handing in is
of a similar type and has the same functions as the product you are
purchasing.You can hand in small used electrical and electronic equipment
(measuring no longer than 25 cm on any one side) for free and with no
obligation to purchase a similar product at electrical and electronic retail
outlets with sales areas larger than 400m² or at nearby recycling points
designated by the retail outlet.
Wherever possible, remove any batteries before disposing of the device.
Under law, as a user you face the risk of penalties if you dispose of devices
and batteries illegally.
Technical support
Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.roccat.com/support Please keep this information for later reference.
FCC CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Mouse FCC ID: XGBKAIN
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
GENERAL SAFETY GUIDELINES AND INTENDED USE
- Do not open or modify the product.
- Not approved changes or modifications may void the operation authority and/or warranty.
- In case of trouble or doubt, contact us immediately.
- Keep the product away from fire/water/humidity/temperature extremes.
- Only use as intended with a compliant PC and connector part.
- I mproper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
- Don‘t look into the light beam on bottom of the mouse.
BATTERY SAFETY GUIDELINES
- I mproperly treated rechargeable batteries may catch fire or cause chemical damages and injuries.
- Do not disassemble or modify the battery in any way.
- If battery is damaged or appears abnormal, stop using it.
- Do not short-circuit the battery.
- Do not leave the battery discharged or unused for extended time periods
- I f battery is replaceable by design, do not apply higher forces which may damage the battery
- Only use original equipment and cables for charging.
Rated voltage/current: DC 3.7V / 190 mA | Warning: If the battery is
incorrectly replaced, there is a danger of explosion. Dispose of used
batteries according to the manufacturer‘s instructions.
Hereby, Voyetra Turtle Beach, Inc. declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive
2014/30/EU.
The full Declaration of Conformity can be requested via following: Company:
Voyetra Turtle Beach, Inc.
Address: 44 South Broadway, 4th Floor, White Plains NY 10601, USA | E-Mail:
support@roccat.com
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY
10601, USA
© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names
mentioned in this manual may be trademarks or registered trademarks and are
the property of their respective owners. Information contained herein is
subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made
liable for any errors that may appear in this manual. This publication or
parts of it may not be reproduced without the express consent of the
publisher. ROCCAT® is a Turtle Beach Brand.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for anyother reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of
acceptable quality and the failure does not amount to a major failure.
https://www.roccat-neon.com/Bsmi
Please use your product’s serial number (located on the bottom label)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>