REALPOWER PB-10000 Solar Wireless Charging Power Bank User Manual

REALPOWER PB-10000 Solar Wireless Charging Power Bank

Thank you for purchasing a Real Powar product!
Recharge your mobile devices quickly and easily anytime, anywhere with the Real Power PB-1 DODO solar powerbank. The power bank can be
charged via your solar panel.

Charging the pawerbank:
A short press on the power button shows the remaining charge of the power bank using the LEDs.

1. LED lights up: 0 % – 25 %
2. LEDs light up: 26 % – 50 %
3. LEDs light up: 51 % – 75 %
4. LEDs light up: 76 % -100 %

To charge the power bank. simply connect the supplied USB-C Charging cable with the charging port of the power bank IN/OUT and via an AC
adapter with a socket. Alternatively, the powerbank can also be charged via the micro USB port INPUT. The power bank now automatically
charges itself completely and indicates the complete charge by lighting up all 4 LEDs.
As soon as direct sunlight hits the solar panel, the solar charging process begins – this Is confirmed by the solar LED lighting up.
The Integrated protection against excessive charging ends the charging process as soon as the battery Is fully charged. The adapters and
cables used to charge and discharge the power bank must be LPS and EN 60950-1:2006/A2:2013 compliant. The charging current should
be at least 5V / 2.100 mA.

Loading end devices:
To charge your smartphone or other mobile device, simply connect the charging cable of your device to one of the charging ports – IN/OUT
or USB.
To charge devices wirelessly, briefly press the power button to tum on the QI function. Now place the compatible device in the middle on the side of the LED lamp – on the opposite side of the solar panel. Your mobile device will now start charging automatically. The integrated protection against excessive charging ends the charging process as soon as the battery is fully charged. Please note that the USB Type-C (IN/OUT] port can be used for charging and discharging.

The integrated LED lamp:
To turn the PB-10000 Solar’s LED lamp on or off, simply press the power button for 3 seconds.

Technical specifications

Capacity:

• Input: USB Type-C
  Micro USB
  Solar

• Output: USB
  USB Type-C
  Wireless

• Total output:
  10.000 mAh / 37 Wh
  5 V 2.000 mA max.
  5 V 2.000 mA max.
  O.BW
  5 V2.100 mA max.
  5 V 2.100 mA max.
  5 V 1.000 mA
  3.100 mA

Radiated maximum transmission power:

• Frequency band[s]: 11.53 dBuA/m@ 3 m 11 OkHz-205kHz

Safety instruction

• The PB-1 ODO Solar has a lithium polymer battery that only reaches its full capacity aft.er being fully charged and discharged several times.

• Do not charge and discharge the power bank at the same time.

• Only use suitable chargers (observe information on voltage and charging current].

• Protect the power bank from a damage – do not continue to use it after a damage.

• Please note that, despite advanced technology, rechargeable batteries have a limited number of charge cycles and after some time they will
  need to be replaced or discarded.

• Do not open the housing – In the event of defects. please contact support or a specialist dealer.

• Recharge the power bank every 3 months when not In use to maintain full performance.

• Do not use the device In extremely cold, hot, humid or dusty areas.

• Protect the product from open flames. There is a risk of explosion!

• Do not bridge any contacts – risk of short circuit.

• Do not touch leaking batteries – risk of injury from chemical burns.

• Keep the battery out of the reach of children.

• Do not keep the power bank near magnetic chip cards such as EC and credit cards to avoid damage.

• Do not place any metallic objects or metallic smartphone cases on the device.

• Please keep a minimum safety distance of 30 cm to medical devices such as pacemakers, cochlear implants, etc. to avoid potential
  interference of the devices.

1. Solar Status LED (Blue] / QI Status LED (Red]
2. Power Button
3. Battery level indicator [Green]
4. Solar panels
5. LED lamp
6. Pendants for attaching ta a carabiner or backpack
7. USB charging port
8. Micro USB charging port
9. USB-C charging port
10. QI charging surface for wireless charging

Intended Use

This power bank is exclusively for powering devices with an operating voltage of 5V direct current (mobile phones, MP3 players, etc.). Any other use or use that goes beyond this is considered improper use and can lead to damage and injuries. Claims of any kind due to damage from improper use are excluded.

Only in Germany
Hotline o800/ 85 87 66 24 RMA-Technik Hotline o800/85 87 66 762 International Kunden Hotline / costumer hotline /conseil-client +49 (0) 2404/ 918-100 RMA Technik Hotline / service hotline / Service  +49 (0) 2404/ 918-132 FAX +49 (0) 2404/ 918-120

Kontakt
August-Schmidt-Str.7 I D-52477 Alsdort/ Germany E-Mail: [email protected]
Internet: www.ultron.de Vorstand: Achim Heyne Vorsitzender des Aufsichtsrates: Dipl.-Kaufmann Andreas : DE217697553 MADE IN CHINA CE)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>