REALPOWER PB-5000 SE PowerBank 5000 Mah Black User Manual

: June 11, 2024
: REALPOWER

Table of Contents

REALPOWER PB-5000 SE PowerBank 5000 Mah Black
Charging the powerbank PB-SOOOSE
The charging of devices
Technical data
Intended use
safety Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REALPOWER PB-5000 SE PowerBank 5000 Mah Black

Thank you for choosing a RealPower product! Charge your smartphone and tablet anytime and anywhere with the PB-5000SE powerbank. With the USB-C output, you can recharge your smartphone and tablet extremely quickly. Please read these Instructions for use and the safety Instructions carefUlly and conscientiously before use.

Charging the powerbank PB-SOOOSE

A short press on the On/Off switch indicates the charging status via LEDs.

LED lights up= 0% – 25%
LEDs light up= 26% – 50%
LEDs light up= 51% – 75%
LEDs light up= 76% -100%

To charge the powerbank, simply connect the supplied USB-A > USB-C charging cable to the USB-C port of the powerbank (IN/OUD and via an AC adapter to a power outlet The powerbank now automatically charges itself completely. The integrated overcharge protection ends the charging process as soon as the powerbank is fully charged. The adapters and cables used to charge and discharge the powerbank must be LPS and EN 60950-1:2006/A2:2013 compliant. The charging current should be 5V / 2,100 mA.

The charging of devices

To charge your smartphone or other mobile device, simply connect your charging cable to one of the charging ports (USB-A or USB-C) and your mobile device. Please note that the USB-C port can be used to charge the powerbank and devices, the port is input and output.

Technical data

capacity: 5,000mAh, 18.5Wh
In: MicroUSB 5V2,000 mA
In: USB-C 5V2,400 mA
Out: USB-A2x 5V2,400 mA
Out: USB-C 5V2,400 mA
Total output: 5 V 2,400 mA max.

Protection against excessive charging and discharging

LED charging status indicator
Dimensions: 98.5 x 64.5 x 15.8 mm / 138.5 g
Scope of delivery: RealPower PB-5000SE powerbank,
USB-A>USB-C cable (30 cm), instruction manual, service card

Intended use

This powerbank is intended exclusively for powering devices with an operating voltage of 5 V DC (mobile phones, tablets, etc.). Any other use or use beyond this is considered improper use and can lead to damage and injury. Claims of any kind due to damage from improper use are excluded.

safety Instructions

The PB-5000SE is equipped with lithium-polymer batteries which are reaching their full capacity only after being fully charged several times.
Do not charge any devices with the powerbank if it is charging itself.
Only use suitable power adapters (observe voltage and charging current specifications)
Protect the powerbank from damage – do not continue to use it after a drop/fall.
Please note that, despite advanced technology, power banks only have a certain number of charging cycles and may lose capacity afterwards.
Do not open the powerbank – in case of defects, please contact our support or a specialist dealer.
Charge the powerbank every 3 months when not in use to maintain full performance.
Do not store the powerbank in a hot or humid environment
The ambient temperature of the powerbank should be between O’C and 40’C. Also, do not expose the powerbank to direct sunlight. Protect the product from an open fire.
There is a risk of explosion!
Do not bridge any contacts – the risk of short circuit
If liquid leaks from the powerbank – Do not touch it. Risk of injury from chemical burns.
Disconnect the powerbank from the power supply unit after charging.
Dispose of the used powerbank in accordance with the legal regulations.