UGREEN CD221 Wireless Charger Stand User Manual

Wireless Charger Stand
Model: CD221
P/N:80576X
User Manual

Product Details

|
---|---
Wireless charging area
Charging indicator| USB-C supply port

Specifications

Qi protocol
Standby power| <0.5W
Vertical inductive distance| <5mm
Charging area| off-centering of 8mm

User Manual

1. Power the wireless charger

• Connecting the wireless charging pad to power adapter via included USB-C cable.
• Connected to power, the indicator flashing green twice, then off.

2. Power your mobile phone

• Put your mobile phone on the wireless charging area of the charging pad.
• Normal charging, the indicator is solid green.
• Abnormal charging, the indicator continuously flashes green.

Solutions of Abnormal Charging

• Make sure your mobile phone supports wireless charging.
• Check if the charging pad is being put on a flat surface.
• Check if your mobile phone stays correctly in the wireless charging area of the charger pad.
• Most non-metal phone cases less than 4mm thick are available, and make sure there is no metal material included in the case.
• The charging pad will auto-recognize any metal object on the charging pad and stop charging automatically.
• Remove the object that can resume charging.
• When the wireless charging pad is overheating, it will enter trickle charge mode, representing a low current charge to your phone. It is recommended to power it off and try it again while the charger return to normal temperature.

Indicator Status

FAQ

Why Do Your Phone and the Wireless Charging Pad Get Hot During Charging?
Some energy of electromagnetic induction will convert to heating during the charging and keep your phone and the charging pad warm, this is considered normal.

Suggestions:

• Stop charging the device when it is fully charged, so as to avoid constantly overheating by long-time continuous charging.
• Turn off the background apps of your phone while charging.

Notes

• To acquire a better experience, we strongly recommend you to use UGREEN charging cable and charging adapter.
• Do not put such magnetic objects as metal, magnetic strip cards beside the center of the wireless charger to avoid abnormal charging or product damage.
• Keep it dry, do not expose it to water or liquid.
• Do not place heavy objects on the product.
• Do not operate the product in environments of high temperature, humidity, or high magnetic fields.
• Do not strike, throw or vibrate the product. The improper behaviors will damage the interior circuit board.
• Do not clean the product with harsh chemicals or strong detergents.
• Keep out of reach of children.
• Dispose of the product according to the local regulation for preserving the ecological environment.
• If it is needed to be dismantled, please apply for UGREEN after-sale services or manufacturers designated by UGREEN to perform this operation.

Safety Instructions

• Do not use unapproved or incompatible power adapters and charging cables, it may cause fire, explosion, or other hazards.
• Do not expose the product in any high-temperature environment or around such heating devices like vehicles, heaters, microwaves,s, and ovens.
• Do not drop, squeeze, puncture or short-circuit the product.
• Do not expose it to water or fire.
• Do not operate the product in thunderstorm weather in case of fault or electric shock.

Package Contents

| |
---|---|---
lx Wireless Charger| 1 x Charging Cable| 1x User Manual
SELECT| | | V| | | | | | | SCALE 1:1
---|---|---|---|---|---|---|---|---|---|---
enroll.| A| B| C| EPS| EPE| EPP| BAG| CTN| LABEL
0-6| 0.05| 0.05| 0.10| /| /| /| /| /| 20
6-30| 0.10| 0.15| 0.20| 0.50| 0.50| 0.50| 3.00| /| 0.20| SHEET 1/1
30-120| 0.15| 0.20| 0.30| 0.50| 0.50| 0.50| 5.00| 1.00| 0.25
120-300| 0.20| 0.30| 0.40| 1.00| 1.00| 1.00| 10.00| 1.00| 0.30| UNIT mm
300-450| 0.25| 0.40| 0.50| 2.00| 2.00| 2.00| 15.00| 2.00| 0.50
450-600| 0.30| 0.50| 0.60| 3.00| 3.00| 3.00| 20.00| 3.00| 0.80|
DRAFT TOLERANCE| t 0.20°| CRITICAL DIM. MARK| *

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1)This device may not cause harmful interference.
   (2)This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>