SYLVANIA IS16288C Start Downlight Instruction Manual
- October 30, 2023
- SYLVANIA
Table of Contents
SYLVANIA IS16288C Start Downlight
Product Information
The Start Downlight 5in1 (IS500) is a multi-functional LED downlight suitable for indoor lighting. It operates on 220-240V and 50/60Hz power supply. The product comes in three different sizes with item codes IS16288C, 0053153, 0053156, 0053154, 0053157, and 0053158. The downlight has a rectangular shape with dimensions ranging from 50mm to 260mm in length and 225mm to 360mm in width. The product is available in cool white (6500K), natural white (4000K), and warm white (3000K) colors. The Start Downlight 5in1 is rated IP20, which means it is protected against solid objects larger than 12mm and has no protection against liquids. The product has a PIR sensor that detects motion and automatically turns on the light. It also has adjustable brightness levels (50% and 100%), CCT (color temperature) settings, LUX (light intensity) levels, and delay settings.
Product Usage Instructions
Before installing the Start Downlight 5in1, ensure that the power supply is switched off.
- Select a suitable location for the downlight and make sure it meets the minimum and maximum width requirements of 10mm and 25mm, respectively.
- If the wire used to connect the downlight is between 9-10mm, there is no need for a plastic cover. However, if the wire is between 6-9mm, a plastic cover is necessary.
- Insert the wires into the corresponding slots on the downlight and secure them in place.
- Install the downlight into the ceiling using the screws and brackets provided in the package.
- Switch on the power supply and test the downlight to ensure it is working correctly.
To use the PIR sensor:
- Press the power button once to activate the PIR sensor mode.
- Adjust the brightness level by pressing the brightness button (50% or 100%).
- Select the desired CCT setting by pressing the CCT button (3000K, 4000K, or 6500K).
- Select the LUX level by pressing the LUX button (10lux, 20lux, or 40lux).
- Select the delay time by pressing the delay button (5s, 30s, 60s, or 180s).
- Choose between light on/off settings by pressing the light on/off button (ON for no dimming and OFF for dimming – 1sec ON / 3 sec OFF).
- The PIR sensor will automatically detect motion and turn on the light according to the selected settings.
Features
DIMENSION
INSTALLATION INSTRUCTION
SEATTING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>