Shenzhen Qianhai Patuoxun Network Technology HM653A-1 Floor Lamp User Manual

Shenzhen Qianhai Patuoxun Network Technology HM653A-1 Floor Lamp

PACKAGE LIS

1.  Floor lamp x1
2.  Remote control x1
3.  Adapter x1
4.  Battery AAA x2
5.  user manual x1

SPECIFICATIONS

OPERATION

Description of product buttons

Note:

1.  After the floor lamp is powered on, the indicator light stays blue; when the floor lamp lights on, the blue indicator light will turn off.
2.  Be sure to turn on the light before selecting timing, color temperature and brightness.

Remote Control Button Description

INSTALLATION METHOD

1.  Assemble and tighten the lamp head, extension rod and light base.
2.  Connect the configured adapter wire to the rear shell of the floor lamp control button.
3.  Plug the adapter into the socket. After the power is turned on, the central control indicator of the floor lamp will stay in blue.

Note:

1.  When adjusting the angle, please hold the lamp post to prevent swinging.
2.  During the adjustment of the lamp neck, do not adjust excessively to prevent damage to the connector parts of the product.

NOTE

1.  This product can only use the adapter included in the package, please do not use an adapter with a voltage greater than 12V, otherwise, it may cause product damage.
2.  Do not disassemble this lamp without professional assistance.
3.  Keep the lamp away from fire, heat and direct sunlight.
4.  Do not clean the lamp with detergent or other solvents.
5.  Keep the touch panel clean, otherwise, the keys may not be sensitive.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits fo a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular Installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
•  Consult the dealer or an experienced radio /TV technician for help.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature indicates that it – should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>