REALPOWER PB-20000 PD Pro 20.000 mAh Powerbank Instruction Manual

REALPOWER PB-20000 PD Pro 20.000 mAh Powerbank

CONTACT

Only in Germany

• Kunden Hotline 0800 85 87 66 24
• RMA-Technik Hotline 0800 85 87 66 762

International

• costumer hotline: +49(0)2404 918-100
• service hotline: +49(0)2404 918-132

CONTACT

• Mail: info@realpower.de
• Internet: www.realpower.de

The Real Power PB-20000PD Pro is a powerbank specially designed to charge notebooks, but also tablets and smartphones. Please read these instructions for use and the carefully and conscientiously before use.

Charging the PB-20000PD Pro

• A short press on the Power On/Off switch indicates the charging status via LEDs.
  1. LED light up = 0 % – 25 % 
  2. LEDs light up = 26 % – 50 %
  3. LEDs light up = 51 % – 75 % 
  4. LEDs light up = 76 % – 100 %
• The LEDs switch off automatically after 5-6 seconds if the powerbank is not active.
• The .,PD” LED only lights up blue when a USB PD-capable device is connected.

• To charge the powerbank, simply connect the supplied 100 W USB-C charging cable to the USB-C port of the powerbank and a charger. We recommend a PD-capable charger (Power Delivery) charger with 65 watts, then the charging time is only approx. 90 minutes. The PB-20000PD Pro now automatically charges itself completely. The integrated overcharge protection stops the charging process as soon as the battery is fully charged.

The charging of devices

To charge your notebook or other mobile device, simply connect the charging cable to one of the charging ports (USB-A or USB-C) and your mobile device. Please use the USB-C port to charge notebooks that support the USB PD protocol. The supplied 100 W USB-C cable is matched to the high output power of the powerbank. Please note that the use-c port can be used to charge the powerbank and devices, the port is input and output.

Technical data

• Capacity: 20,000 mAh, 72 Wh
• In: USB-C PD
  • 5 – 20 V / 65 W max.
  • 5V2,400mA
  • 9 – 15 V 3,000 mA
  • 20V3,250mA
• Out: USB-A
  • 5-12V/18Wmax.
  • 5 V 3,000 mA, 9 V 2,000 mA, 12 V 1,500 mA
• Out: USB-C PD
  • 5 – 20 V / 100 W max.
  • 5 V 2,400 mA, 9 – 15 V 3,000 mA, 20 V 5,000 mA
• Protection against excessive charging and discharging
• LED charging status indicator
• USB-C PD (Power Delivery)
• Dimensions: 171 x 79 x 23 mm/ 567 g
• Scope of delivery: RealPower PB-20000PD Pro, GaN Charger 65W USB-C > USB-C lOOW charging cable, operating instructions, service card

Charging with the charger

The supplied charger can also be used to charge your mobile devices. Connect your smartphone or tablet with the corresponding charging cable via USB-C or USB-A and the charging process begins. Compatible notebooks can be charged via the USB-C port .

Technical data: 65W Charger

• Out: USB-A
  • 5V 3.000 mA,
  • 9V 3.000 mA
  • 12V 3.000 mA,
  • 20V 1.800 MA
• Out: USB-C PD
  • 5V 3.000 MA,
  • 9V 3.000 MA
  • 12V 3.000 mA,
  • 15V 3.000 mA
  • 20V 3.250 mA, 65 W max.

safety Instructions

• The PB-20000PD Pro is equipped with a lithium-ion battery, which reaches its full power only after it has been fully charged several times.
• Do not charge any devices with the powerbank when it is charging itself.
• Only use suitable power adapters (observe voltage and charging current specifications).
• Protect the powerbank from damage – do not continue to use it after a drop/fall.
• Please note that despite advanced technology, powerbanks only have a certain number of charging cycles and may lose power afterwards.
• Do not open the powerbank – in case of defects, please contact support or specialist dealer.
• Charge the powerbank every 3 months when not in use in order to maintain full to maintain full performance.
• Do not store the powerbank in a hot or humid environment.
• The ambient temperature of the powerbank should be between o•c and 40°C.
• Also, do not expose the powerbank to direct sunlight. Protect the product from open fire. There is a risk of explosion!
• Do not bridge any contacts – risk of short circuit.
• If liquid leaks from the powerbank – Do not touch. Risk of injury from chemical burns.
• Disconnect the power bank from the power supply unit after charging.
• Dispose of the used powerbank in accordance with the legal regulations.

Intended use

This power bank is intended exclusively for powering devices with an operating voltage of 5 – 20 V DC (mobile phones, tablets, notebooks, etc.). Any other use or use beyond this is considered improper and can lead to damage and injury. Claims of any kind due to damage from improper use are excluded.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>