HEPCO BECKER 6304575 00 01 C-Bow Sidecarrier for Yamaha Instructions
- June 4, 2024
- HEPCO BECKER
Table of Contents
HEPCO BECKER 6304575 00 01 C-Bow Sidecarrier for Yamaha
Content
- 2x 700007063 C-Bow black
- 1x 700011727 Holder left
- 1x 700011728 Holder right
- 1x 700011729 Halter rear
- 1x 700011722 Adapter
- 1x 700011730 Screw kit:
- 8 Hexagon bolt M6x16
- 4 Filister head screw M8x20
- 2 Filister head screw M8x25
- 8 Washer Ø6,4
- 8 Washer Ø8,4
- 4 Self lock nut M8
Width: 41 cm
Can be combined with Minirack
Required tools
Important
We recommend having the installation carried out in a professional workshop. During installation, tighten all accessible screws loosely at first to ensure tension-free installation. When tightening the screws, observe the tightening torques.
Preparatory actions
Remove the seat.
Dismantle the rear fairing and disconnect the tail light connector
Loosen four original nuts of the number plate bracket.
Remove the original screws of the footrest bracket, screws are obsolete.
Installation Instruction
Fastening of the adapter:
With the original nuts and steel spacers between the licence plate holder
and the plastic trim.
Fastening of the C-Bow holder right/left front:
With filister head screw M8x20, washer Ø8,4 and self lock nut M8.
Fastening of the C-Bow holder right/left rear:
From the inside on the already mounted adapter with filister head screws M8x20
, washers Ø8,4 and self lock nuts M8.
When mounting together with the Minirack, the included filister head screws
M8x25 are used.
Fastening of the C-Bows right/left:
On the mounted holders.
Use hexagon bolts M6x16 and washers Ø6,4.
| Attention
Control all screw connections after the assembling for tightness! Reassemble
the dismantled parts. Please notice our enclosed service information.
---|---
HEPCO &BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: vertrieb@hepco- becker.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>